1. Giới thiệu
Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.
2. Hướng dẫn an toàn
- An toàn điện: Việc lắp đặt phải được thực hiện bởi thợ điện có trình độ chuyên môn theo đúng tất cả các quy định về điện của địa phương và quốc gia. Luôn luôn ngắt nguồn điện tại cầu dao chính trước khi lắp đặt, bảo trì hoặc thay bóng đèn.
- Sử dụng ngoài trời: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
- Loại bóng đèn: Use only E27 bulbs with the specified wattagđ. Không vượt quá wat tối đatagđược ghi trên đồ đạc.
- Xử lý: Cẩn thận khi sử dụng thiết bị. Tránh làm rơi hoặc va đập mạnh.
- Vệ sinh: Không sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi. Lau chùi bằng khăn mềm.amp vải.
- Nhiệt: Hãy đợi bóng đèn nguội hoàn toàn trước khi lắp lại.
3. Nội dung gói hàng
Vui lòng kiểm tra xem tất cả các thành phần đều có sẵn và không bị hư hỏng trước khi bắt đầu cài đặt:
- 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
- 1x đế gắn
- 1x Set of Mounting Hardware (screws, anchors)
- 1x Hướng dẫn sử dụng
Note: E27 bulb is not typically included and must be purchased separately.
4. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Số hiệu mẫu | 105701 |
| Kích thước (D x R x C) | 12.7 x 12.7 x 80cm |
| Cân nặng | 1.03 Kilôgam |
| Vật liệu | Thép không gỉ, Nhựa |
| Số lượng bóng đèn | 1 |
| Tậptage | 230 vôn |
| Loại ổ cắm | E27 |
| Quyền lực | 1 Watt (Max. for integrated components; refer to fixture for bulb max wattage) |
| Nguồn điện | Dây cáp điện |
| Pin cần thiết | KHÔNG |
5. Thiết lập và Cài đặt
Quan trọng: Ensure the main power supply is switched off at the circuit breaker before commencing installation.
- Chọn Vị trí: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
- Chuẩn bị dây điện: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
- Gắn đế: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
- Kết nối dây điện: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
- Lắp đặt bóng đèn: Insert a suitable E27 bulb (not included) into the lamp người giữ. Đừng quá chặt.
- Lịch thi đấu an toàn: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
- Khôi phục điện: Sau khi quá trình lắp đặt hoàn tất và tất cả các kết nối đã được đảm bảo chắc chắn, hãy cấp lại nguồn điện tại cầu dao chính.
Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.
6. Hướng dẫn vận hành
The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.
- Bật nguồn: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
- Cảm biến chuyển động: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
- Tự động tắt: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
- Day/Night Sensor: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.
Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.
Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.
7. Bảo trì
- Vệ sinh: Thường xuyên vệ sinh thiết bị bằng chất mềm, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
- Thay thế bóng đèn:
- Hãy đảm bảo rằng nguồn điện cấp cho thiết bị đã được tắt tại cầu dao.
- Hãy để bóng đèn cũ nguội hoàn toàn trước khi chạm vào.
- Carefully unscrew the top cover or access panel to reach the E27 bulb.
- Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
- Securely reattach the cover or access panel, ensuring a watertight seal.
- Khôi phục nguồn điện.
- Điều tra: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Đèn không bật. | Không có nguồn điện. Bóng đèn bị lỗi. Kết nối dây lỏng lẻo. |
Kiểm tra bộ ngắt mạch. Thay bóng đèn. Inspect and secure wiring (with power off). |
| Đèn sáng liên tục. | Motion sensor faulty or obstructed. Chuyển động liên tục trong vùng phát hiện. Cài đặt cảm biến không chính xác. |
Check for obstructions. Ensure no constant movement. Consult sensor manual for settings. |
| Ánh sáng không phát hiện được chuyển động. | Cảm biến bị tắc hoặc bẩn. Sensor range too low. Ambient light too high (daylight sensor). |
Clean sensor lens. Adjust sensor range (if adjustable). Test at night or in darker conditions. |
| Ánh sáng nhấp nháy. | Bóng đèn lỏng lẻo. Bóng đèn không tương thích. Nguồn điện không ổn định. |
Tighten bulb. Ensure bulb is compatible. Consult electrician for power issues. |
If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.
9. Bảo hành và Hỗ trợ
This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.
Thông tin liên lạc thường có thể được tìm thấy trên bao bì sản phẩm hoặc trang web chính thức của nhà sản xuất webđịa điểm.