NutriBullet NBPB50350SS

NutriBullet Flip Portable Blender NBPB50350SS User Manual

Your guide to operating and maintaining your NutriBullet Flip Portable Blender.

1. Giới thiệu

The NutriBullet Flip is a versatile portable blender and insulated tumbler designed for on-the-go blending. This manual provides essential information for safe and efficient use, maintenance, and troubleshooting.

NutriBullet Flip Portable Blender in Brushed Stainless

Image: The NutriBullet Flip Portable Blender, showcasing thiết kế đẹp mắt.

2. Những gì bao gồm

Your NutriBullet Flip package includes the following components:

  • Đế động cơ và lưỡi dao
  • 20 oz Insulated Cup (Brushed Stainless)
  • Bộ sạc và cáp sạc (USB-C)
  • Nắp lưỡi
  • Nắp đôi tiện dụng có tay cầm
  • Ống hút bằng thép không gỉ
  • Bàn chải vệ sinh
  • Hướng dẫn sử dụng
  • Hướng dẫn công thức
Diagram of NutriBullet Flip 8-piece set components

Image: Visual representation of all included components in the 8-piece set.

3. Thiết lập

  1. Giải nén: Cẩn thận loại bỏ tất cả các thành phần khỏi bao bì.
  2. Mức phí ban đầu: Before first use, fully charge the blender's motor base using the provided USB-C charging cable and block. The LED indicator will show charging status (e.g., flashing yellow for low charge, solid green for full charge).
  3. Thành phần sạch: Wash the insulated cup, blade cover, dual to-go lid, stainless steel straws, and cleaning brush with warm, soapy water. Rinse thoroughly and dry. The motor base should not be submerged in water.
NutriBullet Flip charging via USB-C

Image: The NutriBullet Flip motor base connected to a USB-C charging cable.

4. Hướng dẫn vận hành

  1. Thêm thành phần: Fill the 20 oz insulated cup with your desired ingredients. Ensure ingredients do not exceed the MAX fill line.
  2. Đính kèm lưỡi dao: Twist the Hybrid Motor Base, Blade, and Lid assembly onto the insulated cup until securely tightened.
  3. Activate Blender:
    • Press the power button once to wake up the blender. The LED ring will light up (white for normal use, yellow for low charge, red for needs charging, flashing yellow/red for error).
    • Flip the blender upside down.
    • Press the power button again to start the blending cycle. The blender will run for approximately 30 seconds per cycle.
  4. Enjoy Your Blend: Once blending is complete, flip the blender upright, open the flip-top lid, and sip directly from the spout or use a straw.
Steps for using the NutriBullet Flip: Fill & Twist, Flip & Blend, Flip & Sip

Image: Step-by-step visual guide on how to fill, blend, and sip from the NutriBullet Flip.

Video: An official demonstration of the NutriBullet Flip, showing its features and ease of use.

5. Bảo trì và vệ sinh

Vệ sinh đúng cách đảm bảo độ bền và vệ sinh cho máy NutriBullet Flip của bạn.

  • Tự làm sạch: For quick cleaning, simply add a drop of dish soap and water to the cup, reattach the blade, and run one blending cycle. Rinse thoroughly.
  • Có thể rửa bằng máy rửa chén: The insulated cup, blade cover, dual to-go lid, and stainless steel straws are dishwasher safe.
  • Cơ sở động cơ: The motor base should never be submerged in water. Wipe it clean with a damp cloth. Ensure the USB-C charging port is dry before charging.
  • Chăm sóc lưỡi dao: The blade is sharp. Handle with care. Always ensure the lid is closed and sealed before blending. Never open the lid or attempt to drink while the motor is running or the blades are spinning.
NutriBullet Flip self-cleaning process

Image: Illustration demonstrating the self-cleaning function of the NutriBullet Flip.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your NutriBullet Flip, refer to the following common solutions:

Vấn đềNguyên nhân có thểGiải pháp
Blender does not start or stops unexpectedly.
  • Pin yếu.
  • Lid not securely attached.
  • Quá nhiều nguyên liệu.
  • Quá nhiệt động cơ.
  • Sạc đầy pin máy xay sinh tố.
  • Hãy đảm bảo phần đế động cơ được vặn chặt vào cốc.
  • Reduce ingredients and try again.
  • Allow the motor to cool down for 15-20 minutes before restarting.
Các thành phần không được trộn đều.
  • Quá ít chất lỏng.
  • Large or hard ingredients.
  • Thêm chất lỏng (nước, sữa, nước ép).
  • Cắt nhỏ các nguyên liệu.
  • Shake the blender gently during operation to dislodge ingredients.
LED indicator shows flashing yellow or red.
  • Error or needs charging.
  • Refer to the user guide for specific LED codes.
  • Ensure the unit is fully charged and assembled correctly.

7. Thông số kỹ thuật

  • Thương hiệu: NutriBONS
  • Người mẫu: NBPB50350SS
  • Màu sắc: Thép không gỉ đánh bóng
  • Tính năng đặc biệt: Không dây
  • Dung tích: 20 oz (total cup capacity)
  • Kích thước sản phẩm: 3.87"D x 4.25"W x 9.12"H
  • Nguồn điện: Pin chạy bằng
  • Tậptage: 11.1 vôn
  • Cái gì?tage: 120 watt
  • Số lượng tốc độ: 1
  • Vật liệu: Thép không gỉ
  • Chất liệu lưỡi dao: Thép không gỉ
  • Có thể rửa bằng máy rửa chén: Yes (cup, lid, straws, cleaning brush)

8. Bảo hành và Hỗ trợ

The NutriBullet Flip Portable Blender comes with a Bảo hành có giới hạnĐể biết thông tin chi tiết về bảo hành, đăng ký sản phẩm hoặc hỗ trợ khách hàng, vui lòng tham khảo trang web chính thức của NutriBullet. webtrang web hoặc liên hệ trực tiếp với bộ phận chăm sóc khách hàng của họ.

Thông tin liên lạc: Vui lòng ghé thăm NutriBullet Store on Amazon or the official NutriBullet webtrang web cung cấp các nguồn hỗ trợ mới nhất.

© 2026 NutriBullet. All rights reserved. Information is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.