SAFFUN 2.4 GHz Wireless N64 Controller User Manual

Giới thiệu

Welcome to your SAFFUN 2.4 GHz Wireless N64 Controller. This manual provides detailed instructions for setting up, operating, and maintaining your controller to ensure optimal performance and an enhanced gaming experience on your Nintendo 64 console.

Có gì trong hộp

• Bộ điều khiển không dây
• Bộ thu N64
• Cáp sạc
• Hướng dẫn sử dụng (tài liệu này)

Tính năng sản phẩm

• Kết nối không dây 2.4 GHz: Enjoy seamless gaming up to 10 meters (33 feet) with no delays or dropouts.
• Cắm và chạy: Easy setup with the included N64 receiver.
• Built-in Vibration Motor: Provides immersive haptic feedback without an external Rumble Pak.
• Pin sạc: Integrated 500mAh battery offers up to 10 hours of usage time after a 2.5-hour charge. Features a battery level indicator.
• Player Indicator & Low Battery Warning LED: Clear visual cues for controller status.
• 3D Analog Stick: Enhances precision and comfort for improved gameplay, designed to eliminate stick drift.
• Thiết kế công thái học: Shaped for comfortable grip during extended play sessions.

Image: The SAFFUN N64 Wireless Controller highlighting its built-in vibration motor for enhanced gaming feedback.

Image: Close-up of the controller's precision 3D Analog Stick, designed to prevent stick drift.

Image: Illustration showing the controller's large capacity 500mAh battery, 2.5 hours charging time, and 10 hours usage time.

Image: Hands holding the SAFFUN N64 Wireless Controller, demonstrating its ergonomic design for comfortable grip.

Hướng dẫn thiết lập

1. Sạc bộ điều khiển

Connect the included charging cable to the Type-C port on the controller and to a standard USB power source (e.g., console USB port, USB wall adapter). The LED indicator will show charging status. A full charge takes approximately 2.5 hours. A fully charged controller provides up to 10 hours of gameplay.

2. Kết nối đầu thu

Insert the N64 receiver into a controller port on your Nintendo 64 console. Ensure the console is powered off before inserting or removing the receiver.

3. Ghép nối bộ điều khiển

1. Power on your Nintendo 64 console.
2. Press the small black button on the N64 receiver.
3. Immediately press the red button on the wireless controller.
4. The controller and receiver will pair automatically. A successful connection will be indicated by the player indicator LED on the controller. The controller is now ready for use.

Image: Diagram illustrating the button layout of the SAFFUN N64 Wireless Controller, including the Type-C charging port.

Image: A Nintendo 64 console with the SAFFUN N64 receiver plugged into a controller port, demonstrating compatibility.

Hướng dẫn sử dụng

Điều khiển cơ bản

The controller features a standard N64 button layout, including A, B, C-buttons, Start, 3D Analog Stick, D-Pad, L, R, and ZR buttons. Refer to the button layout diagram in the Setup section for specific button locations.

Bật/Tắt nguồn

To power on the controller, press any button. It will attempt to connect to the last paired receiver. The controller will automatically enter sleep mode after a period of inactivity to conserve battery. To manually power off, press and hold the Home button for a few seconds.

Chỉ báo mức pin

The controller features an LED indicator to show battery status. A low battery warning LED will illuminate when charging is required.

Chức năng rung

The built-in vibration motor provides haptic feedback during gameplay, eliminating the need for a separate Rumble Pak. This feature is automatically active when supported by the game.

BẢO TRÌ

Vệ sinh

Wipe the controller with a soft, dry cloth. Do not use liquid cleaners or solvents. Avoid getting moisture into any openings.

Kho

Bảo quản bộ điều khiển ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ cao. Nếu bảo quản trong thời gian dài, hãy đảm bảo pin được sạc một phần (khoảng 50%) để kéo dài tuổi thọ.

Chăm sóc pin

Do not attempt to replace the built-in battery. Contact support if battery issues arise. Avoid fully discharging the battery frequently. Charge the controller regularly, even if not in use, to maintain battery health.

Xử lý sự cố

Bộ điều khiển không kết nối

• Ensure Receiver is Connected: Verify the N64 receiver is securely plugged into a controller port on the console.
• Sửa chữa bộ điều khiển: Follow the pairing steps in the "Setup Instructions" section (press receiver button, then controller red button).
• Kiểm tra pin: Ensure the controller is charged. Connect the charging cable and check the LED indicator.
• Sự can thiệp: Move closer to the console or away from other 2.4 GHz wireless devices that might cause interference.

Độ trễ hoặc mất kết nối

• Khoảng cách: Ensure you are within the 10-meter (33 feet) operating range.
• Vật cản: Minimize physical obstructions between the controller and the receiver.
• Mức pin: A low battery can affect wireless performance. Recharge the controller.

Buttons or Analog Stick Not Responding

• Sửa chữa: Try re-pairing the controller as described above.
• Khởi động lại bảng điều khiển: Power off and on your N64 console.
• Lau dọn: Ensure no debris is obstructing buttons or the analog stick.

No Vibration Feedback

• Khả năng tương thích trò chơi: Verify that the game you are playing supports rumble features.
• Cài đặt bộ điều khiển: Some games may have in-game options to enable/disable rumble. Check game settings.

Thông số kỹ thuật

Thông tin bảo hành

For warranty details, please refer to the product packaging or contact SAFFUN customer support. Keep your proof of purchase for warranty claims.

Hỗ trợ khách hàng

If you encounter any issues or have questions not covered in this manual, please contact SAFFUN customer support through the retailer's platform or the official SAFFUN webđịa điểm.