WLLKIY Hybrid Solar Inverter User Manual

1. Giới thiệu

This manual provides essential information for the installation, operation, and maintenance of your WLLKIY Hybrid Solar Inverter. Please read this manual thoroughly before installation and operation to ensure proper functioning and safety. Keep this manual for future reference.

The WLLKIY Hybrid Solar Inverter is a versatile power solution designed to integrate solar power, utility grid power, and battery power to provide continuous power supply. It features a pure sine wave output, high PV input voltage range, and a built-in MPPT solar charge controller, making it suitable for various off-grid and hybrid solar applications.

2. Sản phẩm hếtview

The WLLKIY Hybrid Solar Inverter is a multi-functional inverter/charger, combining functions of an inverter, solar charger, and battery charger to offer uninterruptible power support with a portable size. Its comprehensive LCD display allows user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage dựa trên các ứng dụng khác nhau.

• Biến tần năng lượng mặt trời sóng sin tinh khiết.
• Khối lượng đầu vào PV caotage phạm vi (120V-450V).
• Built-in MPPT solar charge controller.
• The inverter can run without a battery (PV voltage must be above 250V).
• Built-in dust protection for remote monitoring in harsh environments.

Hình 2.1: Mặt trước view of the WLLKIY Hybrid Solar Inverter, showing the display panel and ventilation grilles.

Figure 2.2: The inverter highlighting key specifications such as 3.6KW/24V, 100A Max Solar Charge Current, 4000W Max PV Array Power, 500VDC Max PV Array Voltage, and Built-in MPPT Solar Controller.

3. Hướng dẫn an toàn

Please observe all warnings and cautions in this manual. Improper operation may cause damage to the unit and/or personal injury. This device is intended for indoor use only. Do not expose it to rain, snow, or any type of liquid.

• Tập caotage Cảnh báo: The inverter operates with high voltages. All wiring must be performed by qualified personnel.
• An toàn pin: Batteries can produce explosive gases. Ensure proper ventilation when working with batteries. Do not short-circuit battery terminals.
• Tiếp đất: The inverter must be properly grounded to prevent electric shock.
• Thông gió: Đảm bảo luồng không khí lưu thông tốt xung quanh bộ biến tần để tránh quá nhiệt. Không được chặn các lỗ thông gió.
• Giám sát: This product should be used under the direct supervision of an adult.

Figure 3.1: A multilingual warning label indicating that the product is to be used under the direct supervision of an adult.

4. Thiết lập & Cài đặt

Before installation, ensure all components are present and undamaged. Choose a suitable mounting location that is dry, well-ventilated, and away from flammable materials. The inverter should be mounted vertically.

4.1 Sơ đồ kết nối hệ thống

Figure 4.1: A comprehensive system connection diagram illustrating how solar panels, a generator, the utility grid, and battery packs connect to the hybrid solar inverter, which then supplies power to various household and office loads.

4.2 Kết nối dây

Refer to the back panel of the inverter for connection terminals. Ensure all connections are secure and correctly polarized.

Figure 4.2: The back panel of the inverter, detailing connection points for AC input (AC IN), AC output (AC OUT), PV input (PV IN), RS232, USB, battery positive (POS) and negative (NEG) terminals, and the input breaker.

• Kết nối pin: Connect the battery bank to the 'BATTERY POS' and 'BATTERY NEG' terminals. Ensure correct polarity.
• Kết nối đầu vào AC: Connect the utility grid or generator AC supply to the 'AC IN' terminal.
• Kết nối đầu ra AC: Connect your loads (appliances, computers, etc.) to the 'AC OUT' terminal.
• Kết nối đầu vào PV: Connect your solar panel array to the 'PV IN' terminals. Observe correct polarity and voltaggiới hạn e.
• Cổng giao tiếp: Use the RS232 or USB ports for monitoring and configuration with compatible software.

5. Chế độ hoạt động

The inverter supports various operating modes, which can be configured via the LCD display. These modes determine the power source priority (utility, solar, or battery) for supplying power to the loads and charging the batteries.

Figure 5.1: Display illustrations showing four operating modes: 1. With battery, solar and AC available. 2. With battery, solar and AC not available. 3. Without battery, solar available. 4. Without battery, AC available. This image also shows a 'Pure Sine Wave 50/60 Hz Auto Detection' graphic.

• Utility Priority Mode: The inverter primarily uses utility power to supply loads and charge batteries. Solar power is used when utility power is unavailable or insufficient.
• Solar Priority Mode: Solar power is the primary source for loads and battery charging. Utility power is used only when solar power is insufficient or unavailable.
• Chế độ ưu tiên pin: The inverter uses battery power as the primary source. Utility or solar power is used to charge batteries or when battery voltage thấp.
• Không có chế độ pin: Certain models can operate without a battery, directly converting solar PV power to AC for loads, provided the PV voltage trên 250V.

6. Thông số kỹ thuật

The following table provides detailed technical specifications for the WLLKIY Hybrid Solar Inverter models.

KHAI THÁC. Xử lý sự cố

This section provides solutions to common issues you may encounter with your inverter. For problems not listed here, please contact customer support.

• Biến tần không bật: Kiểm tra kết nối pin, đảm bảo dung lượng pintage is within operating range, verify AC input connection if applicable, and check the input breaker.
• Không có đầu ra AC: Check for overload conditions, ensure the inverter is not in fault mode, verify AC output wiring, and check if the utility grid is present if in utility priority mode.
• Pin không sạc: Verify solar panel connections and voltage, check AC input if AC charging is enabled, ensure charge settings are correct on the display.
• Báo động quá tải: Reduce the connected load. The inverter will automatically restart after a cool-down period if the overload is removed.

8. Bảo trì

Bảo trì thường xuyên sẽ đảm bảo độ bền và hiệu suất tối ưu cho bộ biến tần của bạn.

• Vệ sinh: Vệ sinh bên ngoài biến tần định kỳ bằng khăn khô. Đảm bảo các lỗ thông gió không có bụi bẩn.
• Kiểm tra kết nối: Kiểm tra tất cả các mối nối dây điện hàng năm để đảm bảo độ chắc chắn và có dấu hiệu ăn mòn.
• Kiểm tra pin: If using lead-acid batteries, check electrolyte levels and terminal cleanliness regularly.
• Kiểm tra môi trường: Đảm bảo môi trường lắp đặt nằm trong phạm vi nhiệt độ và độ ẩm quy định.

9. Bảo hành và Hỗ trợ

WLLKIY products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your point of purchase. For technical support or service inquiries, please reach out to WLLKIY customer service.

Manufacturer: WLLKIY