Insta360 X4 8K Waterproof 360 Action Camera Instruction Manual

1. Giới thiệu

The Insta360 X4 is an advanced 8K waterproof 360 action camera designed to capture immersive footage in various environments. It features 8K 360 video recording, 4K wide-angle video, FlowState Stabilization, 360° Horizon Lock, and an Invisible Selfie Stick effect. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Insta360 X4 camera.

2. Có gì trong hộp

Your Insta360 X4 GPS Bundle includes the following items:

• 1x Insta360 X4 Camera
• 1x Standard Lens Guards
• 1x 114cm Invisible Selfie Stick
• Nắp ống kính 1x
• 1x GPS Preview Xa
• 1x Thẻ nhớ microSD 256GB
• 1x Cáp Type-C sang Type-C
• Vải ống kính 1x
• 1x Hướng dẫn Bắt đầu Nhanh

3. Thiết lập

3.1. Lắp đặt pin và thẻ nhớ MicroSD

Before first use, ensure the battery is properly installed and a microSD card is inserted.

1. Remove the battery by flicking the battery cover switch inwards with two fingers.
2. Insert the microSD card into the card compartment with the logo facing up.
3. Reinstall the battery. Ensure the orange indicator marks are not visible to maintain waterproof sealing.

3.2. Sạc máy ảnh

The Insta360 X4 charges via its USB Type-C port.

1. Push the switch upwards to open the USB cover.
2. Use the official Type-C to Type-C cable to connect the camera to a power source.
3. When charging, if the X4 is off, the indicator light will stay red. It will turn off when charging is complete.
4. After charging, close the USB cover, ensuring no orange areas are exposed to maintain waterproofing.

3.3. Installing Lens Guards

The standard lens guards protect the camera lenses.

1. Align the markings on the lens guards with the tabs on the lower right side of the lens.
2. Rotate the lens guards clockwise to align the mark on the lens guards with the round hole in the camera's microphone to secure them.

Hình ảnh: Cận cảnh view of the Insta360 X4 camera with a hand installing the standard lens guards by aligning and rotating them clockwise.

3.4. Using the Thermo Grip Cover

For recording 8K video in still conditions, using the Thermo Grip Cover is recommended to reduce camera temperature and provide a comfortable shooting experience. When using in windy or active conditions, the cover is not needed.

Image: A hand sliding the Thermo Grip Cover onto the Insta360 X4 camera, demonstrating its protective and temperature-regulating function.

3.5. Activating Your Camera

To activate your camera, you need to download the Insta360 app.

1. Ensure your phone is connected to the internet and both Wi-Fi and Bluetooth are enabled.
2. Open the Insta360 app and connect to the camera. The app will automatically detect nearby Insta360 cameras.
3. For the first connection, confirm the connection by tapping on the camera screen.
4. Follow the on-screen steps to complete activation.

4. Vận hành máy ảnh

4.1. Chức năng nút

• Nút nguồn: Short press to power on/off the X4. Long press for 2 seconds to turn off the camera.
• Nút nhanh: Short press to enter the preset page, allowing quick switching of shooting modes.
• Nút chụp: Press to record video or take a photo. The indicator light blinks red during recording. Long press to cancel recording.
• Lens Button: Press to switch shooting modes.

4.2. Giao diện kết thúcview

When you first power on the X4, you'll see the main screen with various indicators:

• Trạng thái thẻ SD: Indicates remaining storage.
• Tình trạng pin: Hiển thị mức pin hiện tại.
• Các thông số chụp: Hiển thị các cài đặt hiện tại.
• Adjust FOV: Điều chỉnh trường của view.
• Chế độ chụp: Current shooting mode (e.g., 360 video, single lens).
• Chuyển đổi ống kính: Toggles between 360 and single lens modes.

You can swipe on the screen to navigate:

• Swipe down from the top edge to access the shortcut menu for settings.
• Swipe left from the right edge to enter the shooting parameters page (exposure, image settings).
• Swipe up from the bottom edge to enter the shooting specifications page (resolution, frame rate).
• Swipe right from the left edge to enter the album page to browse recorded footage.

4.3. Shooting Tips

The Insta360 X4 offers several features to enhance your shooting experience:

• Invisible Selfie Stick Effect: Use the Invisible Selfie Stick for seamless third-person shots that appear as if you have a drone or film crew.
• Ultra Stable Footage: FlowState Stabilization and 360° Horizon Lock ensure smooth, level shots regardless of intense action.
• 4K Wide-Angle Action Cam: Use Single-Lens Mode for 4K60fps wide-angle video or 170° MaxView at 4K30fps.
• Kiểm soát bằng cử chỉ: With gesture control enabled, raise your palm to make the camera start or stop recording for a hands-free experience.
• Thời gian thực Preview: While shooting, preview the shot in real-time through the Insta360 app on your phone.

Image: A person on a motorcycle with an invisible selfie stick, demonstrating the third-person perspective captured by the Insta360 X4.

Image: A split image showing a shaky view from a bike (Off) versus a smooth, stabilized view (On) with FlowState Stabilization on the Insta360 X4.

5. Bảo trì

5.1. Vệ sinh và chăm sóc

• Use the provided lens cloth to gently clean the camera lenses.
• Ensure all covers (battery, USB) are securely closed when using the camera in wet or dusty conditions.
• The X4 is waterproof to 33ft (10m) without a dive case and 164ft (50m) with the Invisible Dive Case. Always ensure proper sealing before water activities.
• The camera can handle temperatures as low as -4°F (-20°C).

Image: A close-up of the Insta360 X4 camera partially covered in snow, highlighting its 2290mAh battery and cold resistance.

Image: A split image showing the Insta360 X4 being splashed with water (10M waterproof) and covered in frost (-20°C cold resistant).

5.2. Cập nhật chương trình cơ sở

Regularly update your camera's firmware to ensure optimal performance and access to new features. Firmware updates can be done via the Insta360 app or by copying the firmware file vào thẻ nhớ microSD.

KHAI THÁC. Xử lý sự cố

6.1. Các vấn đề thường gặp và giải pháp

• Camera không bật nguồn: Đảm bảo pin đã được sạc và lắp đúng cách.
• Các vấn đề ghi âm: Check if the microSD card has sufficient space and is properly formatted. Ensure lens guards are correctly installed.
• Sự cố kết nối: Verify Wi-Fi and Bluetooth are enabled on your phone and camera. Ensure the Insta360 app is up to date.
• Quá nhiệt: When recording 8K video in still conditions, use the Thermo Grip Cover to help dissipate heat.

7. Thông số kỹ thuật

8. Bảo hành và Hỗ trợ

Để biết thông tin bảo hành và hỗ trợ kỹ thuật, vui lòng truy cập trang web chính thức của Insta360. webtrang web hoặc liên hệ với bộ phận chăm sóc khách hàng của họ. Giữ lại hóa đơn mua hàng để làm bằng chứng mua hàng khi yêu cầu bảo hành.