Digitek DSG-010PRO 3-Axis Handheld Gimbal Stabilizer User Manual

1. Giới thiệu

Thank you for choosing the Digitek DSG-010PRO 3-Axis Handheld Gimbal Stabilizer. This device is designed to provide smooth, stable footage for your smartphone videos and photos, eliminating shakes and jitters. Please read this manual carefully before use to ensure proper operation and to maximize the performance of your gimbal.

2. Nội dung gói hàng

Vui lòng kiểm tra xem gói hàng của bạn có bao gồm tất cả các mục sau đây không:

• Digitek DSG-010PRO Gimbal Stabilizer
• Cáp sạc USB
• Chân máy mini
• Hướng dẫn sử dụng

3. Sản phẩm hếtview

Familiarize yourself with the components of your Digitek DSG-010PRO gimbal:

Image: Diagram illustrating the various parts of the Digitek DSG-010PRO gimbal, including the phone clamp, pan axis, tilt axis, roll axis, joystick, power button, mode button, and charging port.

1. Điện thoại thông minh Clamp: Secures your smartphone to the gimbal.
2. Tilt Axis Motor: Controls the up and down movement of the phone.
3. Roll Axis Motor: Controls the horizontal rotation of the phone.
4. Pan Axis Motor: Controls the left and right rotation of the gimbal handle.
5. phím điều khiển: For manual control of gimbal direction.
6. Nút nguồn: Long press to power on/off. Single press for battery status.
7. Nút chế độ: Switches between different stabilization modes.
8. Nút chụp: Controls photo/video capture via Bluetooth connection.
9. Cổng sạc (USB-C): For charging the gimbal battery.
10. Thanh trượt thu phóng: Controls digital zoom in the connected app.

4. Sạc Gimbal

Before first use, fully charge the gimbal battery.

• Connect the provided USB charging cable to the gimbal's USB-C charging port.
• Kết nối đầu còn lại của cáp với bộ chuyển đổi nguồn USB (không kèm theo) hoặc cổng USB của máy tính.
• The indicator light will show charging status. It will turn solid when fully charged.
• Thời gian sạc thường mất khoảng 2-3 giờ.

5. Thiết lập

5.1 Mounting the Smartphone

1. Mở rộng điện thoại thông minh clamp cánh tay.
2. Cẩn thận đặt điện thoại thông minh của bạn vào hộp đựngamp, ensuring it is centered and secure.
3. Ensure the phone's camera is not obstructed by the clamp.

Image: A smartphone being carefully inserted into the spring-loaded clamp of the gimbal, ensuring a secure and centered fit.

5.2 Cân bằng Gimbal

Proper balancing is crucial for optimal performance and battery life. Balance the gimbal trước bật nguồn cho nó.

1. After mounting your smartphone, observe its position. If it tilts to one side, adjust the phone's position within the clamp until it remains level when held loosely.
2. If your phone is too heavy on one side, you may need to slide it slightly in the opposite direction within the clamp.
3. The goal is for the phone to stay horizontal and stable without the gimbal being powered on.

Image: A hand adjusting the position of a smartphone within the gimbal clamp to achieve a balanced, level state before powering on the device.

6. Hướng dẫn vận hành

6.1 Bật/Tắt nguồn

• Bật nguồn: Long press the Power Button for 3 seconds until the indicator light turns on.
• Tắt nguồn: Long press the Power Button for 3 seconds until the indicator light turns off.
• Kiểm tra pin: Single press the Power Button to see the battery level indicated by the lights.

6.2 Chuyển đổi chế độ

Press the Mode Button to cycle through different stabilization modes:

• Chế độ theo dõi Pan (PF): The tilt and roll axes are locked, and the pan axis follows the handle's movement.
• Chế độ khóa (L): All three axes are locked, and the camera stays fixed in one direction.
• Full Follow Mode (FF): All three axes follow the handle's movement, providing dynamic shots.

6.3 Điều khiển cần điều khiển

Use the joystick to manually adjust the camera's direction:

• Push up/down to control the tilt axis.
• Push left/right to control the pan axis.

6.4 nút chụp

After connecting via Bluetooth, press the Shutter Button to:

• Single press: Take a photo.
• Long press: Start/stop video recording.

6.5 Connecting to the Digitek App (Bluetooth)

1. Download the official Digitek gimbal app from your smartphone's app store.
2. Ensure your gimbal is powered on.
3. Bật Bluetooth trên điện thoại thông minh của bạn.
4. Open the Digitek app and search for available devices.
5. Select "DSG-010PRO" from the list to connect.
6. Once connected, you can control various functions, including zoom, focus, and advanced shooting modes, directly from the app.

7. Bảo trì

• Keep the gimbal clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the gimbal to water or extreme temperatures.
• Store the gimbal in a cool, dry place, preferably in its original packaging or a protective case.
• Charge the battery at least once every three months if not in regular use to maintain battery health.

KHAI THÁC. Xử lý sự cố

9. Thông số kỹ thuật

10. Bảo hành và Hỗ trợ

The Digitek DSG-010PRO Gimbal Stabilizer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact Digitek customer service through their official webtrang web hoặc thông tin liên lạc được cung cấp trên thẻ bảo hành của bạn.