Jokari 13013

Hướng dẫn sử dụng đèn chiếu sáng cho khóa chốt cửa tự động cảm biến chuyển động Jokari Lock Light

Mẫu: 13013

Giới thiệu

The Jokari Lock Light is a motion-activated LED illuminator designed to provide convenient and enhanced visibility for your deadbolt lock. It automatically lights up when motion is detected, making it easier to locate and operate your lock in low-light conditions.

Thông tin an toàn

  • Để xa tầm tay trẻ em.
  • Không để thiết bị tiếp xúc với nhiệt độ cao hoặc hơi ẩm.
  • Đảm bảo đúng cực của pin khi lắp pin.
  • Vứt bỏ pin đã qua sử dụng một cách có trách nhiệm theo quy định của địa phương.

Nội dung gói

  • 1 x Jokari Lock Light Unit
  • Adhesive mounting strip (pre-attached or separate)
  • (Optional) Mounting screws
  • Lưu ý: Cần có 3 pin AAA và sản phẩm không bao gồm.
Jokari Lock Light in retail packaging

Image: Jokari Lock Light in its retail packaging, showing the product and key features.

Cận cảnh view of the Jokari Lock Light unit

Hình ảnh: Hình ảnh cận cảnh rõ nét. view of the Jokari Lock Light unit, highlighting its design and motion sensor.

Thiết lập và cài đặt

  1. Chèn pin:

    Locate the battery compartment on the back of the Lock Light unit. Open the compartment and insert 3 AAA batteries, ensuring correct polarity (+/-). Close the compartment securely. Please check product packaging for exact battery type if there is any discrepancy.

  2. Chọn vị trí lắp đặt:

    The Lock Light is designed to be installed directly above your deadbolt lock. Ensure the area is clean and dry for optimal adhesive performance. The motion sensor should face outwards towards the approach area.

    Illustration showing peel and stick installation above a lock

    Image: Diagram illustrating the "Peel & Stick" installation method for the Lock Light above a door lock or handle.

  3. Lắp đặt thiết bị:

    Remove the protective backing from the adhesive strip on the back of the Lock Light. Carefully align the unit above your deadbolt, ensuring the light will illuminate the keyhole. Press firmly against the door surface for several seconds to secure it. Alternatively, if screw mounting is preferred and hardware is provided, use appropriate tools to secure the unit.

Hướng dẫn sử dụng

The Jokari Lock Light operates automatically using its integrated motion and day/night sensors.

  • Kích hoạt chuyển động: The device will detect motion up to 10 feet away. When motion is detected in low-light conditions, the LED light will activate.
  • Tự động tắt: The LED light will remain on for approximately 20 seconds after motion is detected, then automatically turn off to conserve battery life.
  • Day/Night Sensor: The Lock Light is equipped with a sensor that prevents it from activating during daylight hours, further optimizing battery usage.
Hand inserting key into deadbolt, illuminated by Jokari Lock Light

Image: A hand inserting a key into a deadbolt lock, clearly illuminated by the Jokari Lock Light mounted above it.

Graphic detailing Lock Light features: Motion Activated Up To 10 ft, Auto Off 20 Seconds, Day/Night Sensor, Long Lasting LED

Image: Infographic highlighting key operational features: motion activation up to 10 feet, auto-off after 20 seconds, day/night sensor, and long-lasting LED.

BẢO TRÌ

  • Thay thế pin: When the light output diminishes or the unit stops activating, it is time to replace the batteries. Open the battery compartment, remove the old batteries, and insert new 3 AAA batteries, observing polarity.
  • Vệ sinh: Wipe the exterior of the Lock Light with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.

Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Đèn không bật.
  • Pin đã hết hoặc lắp không đúng cách.
  • Insufficient darkness (daylight sensor active).
  • Không phát hiện chuyển động nào trong phạm vi.
  • Thay pin, đảm bảo lắp đúng cực.
  • Thử nghiệm trong môi trường tối hơn.
  • Ensure motion occurs within 10 feet of the sensor.
Light stays on too long or continuously.
  • Phát hiện chuyển động liên tục.
  • Cảm biến trục trặc.
  • Ensure no objects are constantly moving in front of the sensor.
  • Tháo và lắp lại pin. Nếu sự cố vẫn tiếp diễn, hãy liên hệ với bộ phận hỗ trợ.
Ánh sáng mờ nhạt.
  • Pin yếu.
  • Thay pin.

Thông số kỹ thuật

  • Số hiệu mẫu: 13013
  • Nguồn điện: 3 x Pin AAA (không bao gồm)
  • Loại ánh sáng: DẪN ĐẾN
  • Phạm vi phát hiện chuyển động: Lên đến 10 feet
  • Hẹn giờ tự động tắt: Khoảng 20 giây
  • Kích thước: 4 x 3 x 2 inch (xấp xỉ)
  • Cân nặng: 2.08 ounce (không có pin)
  • Nhà sản xuất: Jokari US, Inc

Thông tin bảo hành

Specific warranty details for the Jokari Lock Light are not provided in the product information. Please refer to the product packaging or the manufacturer's official webXem các điều khoản và điều kiện bảo hành tại đây.

Ủng hộ

For further assistance or inquiries, please contact Jokari customer support. Contact information may be available on the product packaging or the official Jokari webđịa điểm.

Bạn có thể ghé thăm Jokari Store on Amazon để biết thêm thông tin sản phẩm.

© 2025 Jokari US, Inc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.