Luqeeg Digital Door Viewer Hướng dẫn sử dụng

1. Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of your Luqeeg Digital Door Viewer. Please read this manual thoroughly before using the product to ensure proper function and safety. Keep this manual for future reference.

2. Tính năng sản phẩm

• Màn hình LCD 2.4 inch: Provides a clear and vivid view of visitors at your door.
• 0.3MP Professional Camera: Captures crisp images for easy identification, even in low light conditions.
• Ống kính góc rộng 120°: Cung cấp một phạm vi rộng view of your doorstep, minimizing blind spots and enhancing security.
• Cấu trúc hợp kim kẽm bền: Engineered for superior wear resistance and impact strength, preventing prying and smashing.
• Cung cấp điện kép: Operates using either 3 x 1.5V AAA batteries (not included) or a 5V 1A USB power source for continuous operation.
• Kích hoạt hiển thị tự động: The screen automatically displays the outside view when the doorbell is pressed, providing convenience for all users.

3. Nội dung gói hàng

Xác minh rằng tất cả các mục đều có trong gói hàng:

• 1 x Digital Door Viewer Camera Unit
• 1 x Digital Door Viewer Monitor Unit
• 1 x Accessory Kit (includes 2 x Washers, 8 x Screws)
• 1 x Hướng dẫn sử dụng

Note: AAA batteries and a small memory card are not included and must be purchased separately.

4. Sản phẩm hếtview

Familiarize yourself with the components of your Luqeeg Digital Door Viewờ.

Figure 4.1: Monitor Unit Components

• Màn hình LCD: Hiển thị trực tiếp view từ máy ảnh.
• Monitoring/Power On/Off Button: Press to activate the screen or power the device on/off.
• Giao diện USB: For connecting a 5V 1A USB power source.
• Khe cắm thẻ nhớ nhỏ: Insert a memory card (not included) for potential recording features (if supported by firmware).

Figure 4.2: Monitor Unit Rear View (Battery Compartment)

• Ngăn chứa pin: Houses 3 x AAA batteries (not included).

5. Hướng dẫn cài đặt

The Luqeeg Digital Door Viewer is designed for simple installation, fitting standard door peephole holes without requiring special tools.

5.1 Chuẩn bị

• Ensure your door has an existing peephole or a suitable hole for installation.
• Gather necessary components: Camera unit, Monitor unit, washers, and screws.
• Prepare 3 x AAA batteries (not included) or a 5V 1A USB power source.

5.2 Các bước cài đặt

Figure 5.1: Installation Overview

1. Step 1: Remove Existing Peephole (if applicable)
   Carefully unscrew and remove any existing traditional peephole from your door.
2. Step 2: Insert Camera Unit
   From the outside of the door, insert the camera unit through the peephole hole. Ensure the camera is facing outwards and is flush with the door surface.
3. Step 3: Secure Monitor Unit
   From the inside of the door, connect the cable from the camera unit to the monitor unit. Align the monitor unit with the camera unit and secure it to the door using the provided screws and washers. Ensure the monitor is firmly attached and stable.

5.3 Cấp nguồn cho thiết bị

• Công suất pin: Open the battery compartment on the back of the monitor unit and insert 3 x AAA batteries, observing correct polarity.
• Nguồn điện USB: Connect a 5V 1A USB power adapter (not included) to the USB interface on the side of the monitor unit. This can serve as a backup or primary power source.

6. Hướng dẫn vận hành

6.1 Bật / Tắt nguồn

• Để bật nguồn: Press and hold the Monitoring/Power On/Off button located below the LCD screen until the screen illuminates.
• Để Tắt Nguồn: Press and hold the Monitoring/Power On/Off button until the screen turns off.

6.2 ViewKhách tham quan

• Thủ công View: Press the Monitoring/Power On/Off button once to activate the screen and view the outside area. The screen will automatically turn off after a short period of inactivity to conserve power.
• Tự động View: When someone presses your doorbell (if connected and compatible, or if the device detects motion/sound, depending on model features), the screen will automatically activate and display the outside view.

Hình 6.1: Viewing a Visitor

6.3 Memory Card Usage (Optional)

If your model supports recording and you have inserted a small memory card into the slot:

• Refer to the on-screen menu or additional documentation for specific instructions on how to initiate recording, view playback, or manage stored footage.

7. Bảo trì

• Vệ sinh: Use a soft, dry cloth to clean the screen and camera lens. Avoid abrasive cleaners or solvents.
• Thay thế pin: When the battery indicator shows low power, replace all 3 AAA batteries simultaneously. Do not mix old and new batteries.
• Điều kiện môi trường: Ensure the device is not exposed to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

KHAI THÁC. Xử lý sự cố

9. Thông số kỹ thuật

10. Hỗ trợ

For any questions, technical assistance, or support regarding your Luqeeg Digital Door Viewer, please refer to the contact information provided with your purchase or visit the official Luqeeg webTrang web. Đội ngũ hỗ trợ khách hàng của chúng tôi luôn sẵn sàng trợ giúp bạn.