1. Giới thiệu
Thank you for choosing the Biling Pond Filter Kit with Pump. This comprehensive system is designed to maintain clear and healthy water in your garden pond, offering filtration, water circulation, and decorative fountain functions. It is suitable for ponds up to 6,000 liters (without fish) or 3,000 liters (with fish). Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.
Image 1.1: Before and After Pond Clarity with Biling Filter Kit. The left side shows a pond with cloudy water, indicating poor filtration. The right side shows the same pond with clear water and an active fountain, demonstrating the effectiveness of the Biling filter kit in improving water quality and aesthetics.
2. Hướng dẫn an toàn
- Always disconnect the power supply before performing any maintenance, cleaning, or installation tasks.
- The pump must be completely submerged in water during operation. Running the pump dry will cause severe damage to the motor and void the warranty.
- Ensure the electrical cable and plug are in good condition and protected from damage. Do not use if the cable is frayed or damaged.
- This product is not resistant to frost. During winter months or when freezing temperatures are expected, remove the unit from the pond and store it in a frost-free location.
- Do not use this product in swimming pools or for purposes other than garden pond filtration and water features.
- Keep children and pets away from the pond area during installation and operation.
3. Nội dung gói hàng
Kiểm tra xem tất cả các bộ phận có đầy đủ và không bị hư hỏng hay không:
- Water Pump with Integrated Filter Housing
- Biological Filter Sponges (Coarse and Fine)
- Bio-Balls and Ceramic Filter Rings
- 3 Different Fountain Nozzles
- Adjustable Telescopic Riser Pipe
- Flow Regulation Valve
- Dây nguồn (3 mét)
Image 3.1: Internal Components of the Filter Pump Kit. This diagram illustrates the various filtration media within the pump housing, including coarse and fine filter pads, the water pump itself, ceramic filter rings, and bio-balls, all working together to clean pond water.
4. Hướng dẫn thiết lập
Thực hiện theo các bước sau để thiết lập ban đầu:
- Assemble the Filter Unit: Ensure all filter media (sponges, bio-balls, ceramic rings) are correctly placed inside the filter housing. Secure the housing clips.
- Attach Riser Pipe and Nozzle: Connect the telescopic riser pipe to the pump outlet. Select your desired fountain nozzle and attach it to the top of the riser pipe.
- Điều chỉnh lưu lượng: The pump features an individually adjustable flow regulation valve. This allows you to control the water flow for the fountain or divert water to a gargoyle or stream feature. Adjust as needed.
- Vị trí đặt máy bơm: Place the entire filter unit into your pond. The minimum immersion depth for the filter box is 15 cm. With all riser connections, the maximum immersion depth is 56 cm. Ensure the pump is fully submerged and rests on a stable, level surface to prevent it from drawing in excessive sludge from the pond bottom.
- Kết nối với nguồn điện: Once the pump is correctly positioned and fully submerged, connect the power plug to a suitable, weather-protected outdoor electrical outlet.
Image 4.1: Installing the Biling Pond Filter Kit. This image shows a person carefully placing the filter pump unit into a pond, highlighting the straightforward installation process.
Image 4.2: Pond Filter Pump Dimensions. This diagram provides key measurements for the Biling pond filter pump, including its maximum height of 94cm and the adjustable range of the fountain riser (32-59cm), along with the dimensions of the filter box and the 300cm power cable length.
5. Hướng dẫn vận hành
Once installed, the pump will begin operating when connected to power. The Biling Pond Filter Kit offers various water spray patterns:
- Fountain Nozzles: The kit includes three different nozzles to create diverse water patterns. To change the pattern, simply remove the current nozzle and attach another.
- Điều chỉnh lưu lượng: Use the integrated flow regulation valve to increase or decrease the water flow to the fountain or to divert water to other features like a waterfall or stream.
Image 5.1: Three Different Water Spray Patterns. This image displays the three distinct fountain effects achievable with the included nozzles, offering variety for your pond's aesthetic. The diagram below shows how adjusting the gap on the nozzle can change the fountain diameter.
6. Bảo trì
Regular maintenance ensures optimal performance and extends the life of your filter kit:
- Làm sạch bộ lọc: Disconnect power. The filter housing features practical clips for quick opening. Remove the filter sponges, bio-balls, and ceramic rings. Clean them thoroughly with pond water (not tap water, to preserve beneficial bacteria) to remove accumulated debris.
- Pump Impeller Cleaning: Periodically check the pump impeller for blockages from debris or algae. Remove any obstructions carefully.
- Vệ sinh nhà ở: Clean the inside of the filter housing to prevent buildup.
- Lắp ráp lại: Reassemble all components, ensuring the clips are securely fastened.
- Lưu trữ mùa đông: Before the first frost, remove the entire unit from the pond, clean it thoroughly, and store it in a dry, frost-free location.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Bơm không chạy | No power supply; Impeller blocked; Motor damaged | Check power connection; Disconnect power and clean impeller; Contact support if motor is damaged. |
| Low water flow/fountain height | Filter media clogged; Impeller blocked; Flow valve closed; Water level too low | Clean filter media; Clean impeller; Adjust flow valve; Ensure pump is fully submerged. |
| Pond water remains cloudy | Filter media saturated; Pond size exceeds capacity; Insufficient biological filtration | Clean filter media regularly; Ensure pond size is within recommended limits; Allow time for biological filtration to establish. |
8. Thông số kỹ thuật
- Người mẫu: B326-2500 l/h (P65-A)
- Thương hiệu: Tiền bạc
- Tốc độ dòng chảy tối đa: 2500 lít mỗi giờ
- Quyền lực: 40Watt
- Nguồn điện: Dây cáp điện
- Chiều dài cáp: 3 mét
- Vật liệu: Acrylonitrile Butadiene Styrene (ABS)
- Kích thước sản phẩm (D x R x C): 18 x 11 x 34cm
- Trọng lượng sản phẩm: 1.5 Kilôgam
- Max. Water Column: Lên đến 2.1 mét
- Suitable Pond Volume: Up to 5 m³ (without fish), 3 m³ (with fish)
- Độ sâu ngâm tối thiểu: 15cm
- Maximum Immersion Depth (with risers): 56cm
9. Bảo hành và Hỗ trợ
The Biling Pond Filter Kit with Pump comes with a Bảo hành 1 năm kể từ ngày mua. Ngoài ra, một Đảm bảo hoàn tiền trong vòng 30 ngày is offered for your peace of mind. For any questions, technical assistance, or warranty claims, please contact your retailer or Biling customer support through the contact information provided at the point of purchase.