Lexicon Dade Queen Platform Bed (Model 1492GY-1) Instruction Manual

1. Sản phẩm hếtview

The Lexicon Dade Queen Platform Bed is designed to offer a modern and versatile sleeping solution. This platform bed features a gray velvet fabric upholstered headboard with vertical channel-tufting, complemented by a brushed gray finish on the engineered wood frame, footboard, and rails. Its platform construction eliminates the need for a box spring.

Image 1.1: The Lexicon Dade Queen Platform Bed in a contemporary bedroom setting, showcasing its gray velvet headboard and wood frame.

2. Thông tin an toàn

Please read and understand all instructions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product. Keep all small parts and packaging materials away from children. Assembly should be performed by at least two adults. Do not use power tools for assembly unless specifically instructed, as overtightening fasteners can cause damage. Ensure all connections are secure before use. Do not exceed the recommended weight capacity for the bed frame.

3. Nội dung gói hàng

Hãy kiểm tra kỹ tất cả các bộ phận được liệt kê bên dưới trước khi bắt đầu lắp ráp. Nếu thiếu hoặc hư hỏng bất kỳ bộ phận nào, vui lòng liên hệ với bộ phận hỗ trợ khách hàng.

• Đầu giường (1)
• Bàn đạp (1)
• Thanh ray bên (2)
• Support Slats (Multiple)
• Center Support Legs (Multiple)
• Hardware Pack (Bolts, Washers, Allen Wrench, etc.)

4. Hướng dẫn lắp ráp

Follow these steps carefully for proper assembly. It is recommended to assemble the bed in the room where it will be used.

1. Tháo hộp và xác định các bộ phận: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify each part using the provided parts list.
2. Gắn thanh chắn bên vào đầu giường: Align the side rails with the pre-drilled holes on the headboard. Secure them using the appropriate bolts and washers from the hardware pack. Do not fully tighten bolts until all major components are connected.
3. Gắn thanh ray bên vào chân ghế: Connect the other end of the side rails to the footboard, aligning holes and securing with bolts and washers. Once all four corners are connected, gently tighten all bolts using the provided Allen wrench.


Hình ảnh 4.1: Bên view of the bed frame, illustrating the connection points between the side rails, headboard, and footboard.

4. Lắp đặt chân đỡ trung tâm: Attach the center support legs to the designated crossbeams or support points on the side rails. Ensure they are firmly attached and provide stable support.
5. Place Support Slats: Lay the wooden support slats across the bed frame, ensuring they are evenly spaced and secured to the side rails using the provided fasteners (if applicable). The slats provide the necessary support for your mattress.


Hình ảnh 4.2: Góc cạnh view of the bed frame with the wooden support slats properly installed, ready for a mattress.

6. Thắt chặt cuối cùng: Double-check all bolts and fasteners to ensure they are fully tightened. Do not overtighten.

5. Sử dụng

This platform bed is designed to be used without a box spring. Simply place your queen-sized mattress directly onto the support slats. Ensure the mattress is centered and evenly distributed on the frame. Avoid jumping on the bed or placing excessive localized weight on any single point of the frame or slats.

6. Bảo trì

• Vệ sinh đồ nội thất bọc nhung: For general cleaning, gently vacuum the velvet fabric using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner. Avoid harsh chemicals.
• Cleaning Wood Frame: Lau sạch khung gỗ bằng khăn mềm.amp cloth. Avoid abrasive cleaners or polishes that may damage the finish. Dry immediately with a clean cloth.
• Kiểm tra phần cứng: Periodically check all bolts and fasteners to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaking.
• Tránh ánh nắng trực tiếp: Prolonged exposure to direct sunlight can cause fading of the velvet fabric and wood finish.

Image 6.1: Close-up detail of the gray velvet fabric and the brushed gray wood finish, illustrating the textures for cleaning reference.

KHAI THÁC. Xử lý sự cố

• Tiếng kêu cót két: If the bed squeaks, check all bolts and connections. Tighten any loose hardware. Ensure the center support legs are firmly on the floor and evenly supporting the frame.
• Khung không ổn định: If the bed feels wobbly, verify that all components are correctly assembled and all fasteners are securely tightened. Ensure the bed is on a level surface.
• Những phần hư hại: Nếu bất kỳ bộ phận nào bị hư hỏng trong quá trình lắp ráp hoặc sử dụng, hãy ngừng sử dụng và liên hệ với bộ phận hỗ trợ khách hàng để được thay thế linh kiện.

8. Thông số kỹ thuật

Image 8.1: Dimensional diagram of the Lexicon Dade Queen Platform Bed.

9. Bảo hành và Hỗ trợ

For warranty information and customer support, please refer to the product description on the store page or contact Lexicon customer service directly. You can visit the official Lexicon store for more details: Cửa hàng Lexicon.