1. Giới thiệu
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Waytronic E12 Outdoor Motion Activated Voice Prompt Siren Alarm. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
2. Sản phẩm hếtview
The Waytronic E12 is an outdoor motion-activated device designed to play customizable voice prompts or siren alarms upon detecting movement. It features a durable, waterproof design and a built-in speaker for clear audio output.
Các tính năng chính:
- Supports IPX5 level waterproofing.
- Button controls for track selection and volume adjustment.
- USB connectivity for voice replacement via computer.
- Hanging design for flexible installation.
- Digital track, volume, and mode display.
- Pin Lithium 2500mAh tích hợp sẵn.
- 100dB warning volume (within 1m).
Figure 1: Waytronic E12 device with included mounting bracket.
Figure 2: The E12 is designed for both indoor and outdoor use, offering IP43 protection against light rain.
Hình 3: Ví dụamples of suitable application environments for the E12 device.
3. Thiết lập
3.1 Tháo dỡ và kiểm tra ban đầu
Carefully remove all components from the packaging. Verify that all parts are present and undamaged. The package should include the E12 device, a power cable, and a USB data cable (optional, but recommended for voice replacement).
3.2 Gắn thiết bị
The E12 features a hanging design for easy installation. Use the provided mounting bracket to secure the device to a wall or other suitable surface. Ensure the motion sensor has a clear line of sight to the area you wish to monitor.
Figure 4: Illustration of the gimbal and its installation onto the E12 device.
3.3 Bật / Tắt nguồn
Locate the slide switch on the side of the device (under the white cover) to power the unit on or off.
4. Hướng dẫn vận hành
4.1 Phát hiện chuyển động
The E12 utilizes an intelligent infrared sensor to detect motion. The inductive distance is approximately 0-4 meters, with an induction angle of 120 degrees. When motion is detected within this range, the device will activate and play the programmed audio.
Figure 5: Infrared sensor detection range and angle.
4.2 Điều khiển âm lượng
The device features a 6-level volume control. Use the dedicated volume buttons on the bottom of the unit to adjust the output level. The current volume level will be displayed on the small LED screen.
4.3 Track Selection and Playback Modes
The E12 supports digital track selection and two playback modes: single track (A) and full track (B). Use the track selection buttons to navigate through loaded audio files. The selected mode and track number will be shown on the LED display.
- Single Track Mode (A): Plays one selected audio file each time motion is detected.
- Full Track Mode (B): Plays all loaded audio files in succession each time motion is detected.
4.4 Voice Replacement via USB
The E12 allows you to replace the default audio prompts with your own custom MP3 files. This process requires connecting the device to a computer using a compatible USB data cable.
- Kết nối với máy tính: Use a USB-A to USB-C data cable (not just a charging cable) to connect the E12 to your computer. The device should appear as a removable drive, often labeled "NONAME".
- Quản lý âm thanh Files: The device has approximately 4MB of storage. You can delete existing demo sounds by moving them to the trash and emptying the trash on your computer.
- Upload Custom Audio: Kéo và thả tệp âm thanh MP3 bạn muốn. files onto the device's drive. For multiple files, consider naming them with a numerical prefix (e.g., 001_sound.mp3, 002_alert.mp3) to control playback order.
- Thoát hiểm an toàn: Sau khi chuyển files, safely eject the device from your computer before disconnecting the USB cable.
Figure 6: Connecting the E12 to a computer for custom voice upload.
Video 1: Demonstrates the E12's features, including human infrared induction, built-in battery, memory, volume control, and the process of copying audio files via USB cable to a computer.
Hình 7: Ví dụamples of custom voice applications for the E12.
5. Bảo trì
5.1 Vệ sinh
Lau máy bằng khăn mềm, damp vải. Tránh sử dụng hóa chất mạnh hoặc chất tẩy rửa có tính mài mòn, vì chúng có thể làm hỏng vải.asing hoặc các linh kiện điện tử.
5.2 Thông tin về pin
The E12 is equipped with a built-in 2500mAh Lithium battery. Recharge the device using the provided power cable when the battery level is low. A red indicator light typically signifies charging, turning off when fully charged.
5.3 Chống thấm
The device has an IPX5 (or IP43 as per specifications) waterproof rating, meaning it is protected against low-pressure water jets from any direction. While suitable for outdoor use and light rain, it is not designed for submersion. Ensure the USB port cover is securely closed when not in use to maintain water resistance.
KHAI THÁC. Xử lý sự cố
6.1 Thiết bị không bật nguồn
- Đảm bảo công tắc nguồn ở vị trí 'BẬT'.
- Charge the device for at least 2-3 hours. The battery may be depleted.
6.2 Không có âm thanh hoặc âm lượng thấp
- Check the volume level using the volume control buttons.
- Xác minh âm thanh đó files are correctly loaded onto the device and are in MP3 format.
- Ensure the motion sensor is not obstructed and is detecting movement.
6.3 Unable to Connect to Computer for Voice Replacement
- Use a USB cable that supports data transfer, not just charging. The included power cable may not be a data cable.
- Ensure the device is powered on when connecting to the computer.
- Try a different USB port on your computer or another computer if available.
- Confirm that the device appears as a removable drive (e.g., "NONAME") on your computer.
6.4 Motion Sensor Not Triggering
- Check for obstructions in front of the sensor.
- Ensure the device is positioned correctly to cover the desired detection area.
- Kiểm tra xem thiết bị đã được bật nguồn và có đủ pin hay chưa.
7. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Người mẫu | E12 |
| Tậptage | 3.7 vôn |
| Phương pháp kiểm soát | Chạm |
| Mức độ tiếng ồn | 100 Decibels (within 1m) |
| Kiểu lắp đặt | Treo tường |
| Công nghệ cảm biến | Motion Sensor (Infrared) |
| Khoảng cách quy nạp | 0-4 mét |
| Góc cảm ứng | 120 Độ |
| Xếp hạng chống thấm nước | IP43 / IPX5 |
| Trọng lượng sản phẩm | 13.4 ounce |
| Kích thước sản phẩm | 5.12 x 2.87 x 1.57 inch (130 x 73 x 40 mm) |
| Loại pin | Pin Lithium tích hợp 2500mAh |
| Ký ức | 4 MB (approx.) |
Figure 8: Summary of key product specifications.
8. Bảo hành và Hỗ trợ
Specific warranty details and direct support contact information are not provided in the available product data. For warranty claims or technical assistance, please refer to the seller's policies or contact the retailer where the product was purchased.