Herdio 4 Inch 240W Marine Bluetooth Speakers

Sản phẩm trênview

The Herdio 4 Inch 240W Marine Bluetooth Speakers are designed for outdoor environments, offering robust sound and waterproof durability. This system includes four 4-inch 2-way full-range speakers and a Bluetooth amplifier, suitable for various vehicles and outdoor settings.

Key features include Bluetooth 5.0 connectivity, IP66 waterproof rating, and a compact design for versatile mounting. The system provides a maximum output power of 240 Watts (60 Watts per speaker) with a frequency response of 80Hz-20kHz and 4 Ohms impedance.

Có gì trong hộp

• 4 x Marine Speakers with Mounting Brackets
• 1 xBluetooth Amplifier (4-channel)
• 1 x 12V DC Power Cable
• 1 x Set of Bolts and Screws

Thông số kỹ thuật

Thiết lập & Cài đặt

Follow these steps to install and connect your Herdio Marine Bluetooth Speakers:

1. Lắp đặt loa:
   The speakers come with adjustable mounting brackets. Loosen the knobs on the sides of each speaker to remove the bracket. Secure the bracket to your desired surface using the provided screws. Once the bracket is fixed, place the speaker back into the bracket and tighten the knobs to secure it. The bracket allows for 180-degree rotation for optimal sound direction.
2. Speaker Wiring to Ampngười lót:
   Use a small screwdriver to loosen the terminals on the amplifier. Connect the speaker cables to the amplifier terminals. Ensure that the white wire (positive) and black wire (negative) from each speaker are connected to the corresponding L+ (Left Positive), L- (Left Negative), R+ (Right Positive), and R- (Right Negative) terminals on the ampchất lót. Các amplifier supports 4 channels.
3. Kết nối nguồn điện:
   Connect the provided 12V DC power cable to the amplifier. The red wire from the power cable links to your 12V battery's positive terminal, and the black wire links to the negative terminal. Ensure a secure connection to prevent power interruptions.
4. Ghép nối Bluetooth:
   Once powered on, the amplifier's blue light will blink, indicating it is in pairing mode. On your device (smartphone, tablet, etc.), search for Bluetooth devices and select 'Herdio' to connect. A constant blue light on the amplifier indicates a successful connection.

Hướng dẫn sử dụng

Các amplifier features several buttons for controlling playback and settings:

1. Nút nguồn/Phát/Tạm dừng:
   Long press (3 seconds) to power on/off. Short press to play or pause music.
2. Nút chế độ:
   Long press (3 seconds) to restore factory settings. Short press to switch between Bluetooth (BT), USB, AUX, and MIC modes.
3. Volume Down/TWS Button:
   Long press (3 seconds) to enter/exit TWS (True Wireless Stereo) mode. Short press to decrease the volume.
4. Volume Up/Mono Button:
   Long press (3 seconds) to switch between stereo and mono sound output. Short press to increase the volume.
5. Previous Track/Rewind Button:
   Long press (3 seconds) for fast rewind. Short press to go to the previous song.
6. Next Track/Fast Forward Button:
   Long press (3 seconds) for fast forward. Short press to go to the next song.

BẢO TRÌ

To ensure the longevity and optimal performance of your Herdio Marine Bluetooth Speakers, follow these maintenance guidelines:

• Vệ sinh: Regularly wipe the speakers with a soft, damp cloth to remove dirt and salt residue. Avoid using harsh chemicals or abrasive cleaners.
• Tiếp xúc với nước: While the speakers are IP66 waterproof, prolonged submersion is not recommended. Ensure all connections are secure to maintain water resistance.
• Kho: When not in use for extended periods, store the speakers in a dry, cool place away from direct sunlight and extreme temperatures.
• Kiểm tra kết nối: Periodically inspect all wiring and connections for any signs of wear, corrosion, or looseness. Tighten connections as needed.

Xử lý sự cố

If you encounter issues with your Herdio Marine Bluetooth Speakers, refer to the following common problems and solutions:

• Không có điện:
  - Ensure the 12V DC power cable is securely connected to both the amplifier and the power source (battery).
  - Check the power source for proper voltage and functionality.
• Không có âm thanh:
  - Verify that the speaker wires are correctly connected to the amplifier terminals (positive to positive, negative to negative).
  - Confirm that the ampbộ lót được bật nguồn và âm lượng được tăng lên.
  - Check the audio source (Bluetooth device, USB, AUX) for proper playback and volume settings.
  - Đảm bảo amplifier is in the correct input mode (BT, USB, AUX, MIC).
• Bluetooth không kết nối:
  - Hãy đảm bảo rằng amplifier is in Bluetooth mode (blue light blinking).
  - Ensure your device's Bluetooth is enabled and within the 20-meter range.
  - Try forgetting the device from your phone's Bluetooth settings and re-pairing.
  - Restart both the amplifier và thiết bị Bluetooth của bạn.
• Âm thanh bị méo:
  - Reduce the volume on both the ampamply và nguồn âm thanh của bạn.
  - Check speaker wire connections for any loose or corroded contacts.
  - Ensure the speakers are not overloaded beyond their rated power.

Bảo hành & Hỗ trợ

The Herdio 4 Inch 240W Marine Bluetooth Speakers come with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty information provided with your product packaging or contact Herdio customer support.

For technical assistance, troubleshooting beyond this manual, or inquiries about replacement parts, please visit the official Herdio webtrang web hoặc liên hệ với bộ phận dịch vụ khách hàng của họ.