1. Giới thiệu
Thank you for choosing Herdio 4 Inch Bluetooth Marine Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new audio system. Designed for outdoor environments, these waterproof speakers offer robust sound for marine, ATV, UTV, golf cart, and other powersports applications. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Image: Herdio 4 Inch Bluetooth Marine Speakers in white, showcasinthiết kế sản phẩm.
2. Có gì trong hộp
Upon opening your Herdio 4 Inch Bluetooth Marine Speakers package, please verify that all the following components are included:
- 4 x Marine Speakers with Mounting Brackets
- 1 lần Amplifier (Model AMP-BTX01)
- 1 x Cáp nguồn
- 1 x Set of Bolts for installation
- 1 x User Manual (for Ampngười lót)
Video: Unboxing the Herdio 4 Inch 240W Marine Bluetooth Speakers for Golf Cart. This video demonstrates the contents of the package, including the four speakers, amplifier, power cable, and mounting hardware.
3. Thông số kỹ thuật sản phẩm
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Tên mẫu | SZJW-4-61BT |
| Loại loa | Ngoài trời |
| Kiểu lắp đặt | Lắp đặt bề mặt |
| Vật liệu | Acrylonitrile Butadiene Styrene (ABS) |
| Màu sắc | Trắng |
| Kích thước sản phẩm (mỗi loa) | 4.3"D x 4.3"W x 4.3"H (11cm x 11cm x 11cm) |
| Trọng lượng sản phẩm (tổng cộng) | 6.38 pound (2.9 kg) |
| Kích thước loa | 4 inch |
| Công suất đầu ra tối đa của loa | 240 Watts (60W per speaker) |
| Trở kháng | 4 Ohm |
| Đáp ứng tần số | 80Hz-20kHz |
| Hiệu quả | 91dB |
| Công nghệ kết nối | Bluetooth 5.0 |
| Công nghệ truyền thông không dây | Bluetooth |
| Phạm vi Bluetooth | 20 Mét (65.62 Feet) |
| Mức độ chống nước | Không thấm nước (IP66) |
| Nguồn điện | Điện có dây (12V DC) |
| Các thành phần bao gồm | 4 marine speakers with mounting brackets, 1 amplifier, 1 power cable, a set of bolts |
| Sử dụng được đề xuất | Marine, Boat, UTV, ATV, Truck, Golf Cart, RV, Off-Road Vehicles, Outdoor activities, Water sports |
Image: Detailed product dimensions of a single Herdio 4 Inch Marine Speaker, showing measurements in inches and centimeters.
Image: Diagram illustrating the 60W maximum power output per speaker for deep stereo sound, highlighting the internal components.
4. Thiết lập & Cài đặt
Follow these steps for proper installation of your Herdio Marine Speakers and ampngười lót:
4.1 Speaker Cable Connection to Ampngười nói dối
- Identify the speaker cables. The white wire is positive (+), and the black wire is negative (-).
- Locate the speaker terminals on the ampngười lót (AMP-BTX01). There are terminals for Left+ (L+), Left- (L-), Right+ (R+), and Right- (R-).
- Using a small screwdriver, loosen the screws on the ampthiết bị đầu cuối lifier.
- Insert the corresponding speaker wires into the terminals. Ensure correct polarity: white to positive, black to negative.
- Siết chặt các vít để cố định dây chắc chắn.
Image: Wiring diagram illustrating the connection of four speakers to the Herdio amplifier and a 12V power supply, with Bluetooth pairing shown via a smartphone.
Video: Detailed demonstration of wiring the speaker cables to the amplifier terminals and connecting the power supply. The video also shows the Bluetooth pairing process and basic ampđiều khiển lifier.
4.2 Kết nối nguồn điện
- Connect the provided 12V DC power cable to the amplifier's power input port.
- Connect the red wire of the power cable to the positive terminal of your 12V battery (e.g., car battery, marine battery).
- Connect the black wire of the power cable to the negative terminal of your 12V battery.
- Ensure all connections are secure to prevent power interruptions or damage.
4.3 Lắp đặt loa
The speakers come with adjustable mounting brackets for flexible installation.
- To attach the bracket, turn the knob on the side of the speaker counter-clockwise to remove it.
- Position the bracket on your desired mounting surface (e.g., support bar, frame, roll-cage) and secure it using the provided screws.
- Place the speaker back onto the bracket and tighten the knob clockwise until the speaker is firmly held.
- Loosen the knobs slightly to adjust the speaker's angle (up to 180 degrees rotation) for optimal sound direction, then re-tighten.
Image: Illustration of the easy and flexible installation process, highlighting the 180-degree rotatable mounting bracket for the speakers.
5. Hướng dẫn vận hành
5.1 Ampđiều khiển lifier
Các amplifier features several buttons for controlling playback and settings:
- Nút nguồn (⏻): Long press for 3 seconds to power on/off. Short press to play/pause.
- Nút chế độ (MODE): Short press to switch between Bluetooth (BT), USB, Auxiliary (AUX), and Microphone (MIC) modes. Long press for 3 seconds to restore factory settings.
- Volume Down / TWS Button (VOL- TWS): Short press to decrease volume. Long press for 3 seconds to turn on/off TWS (True Wireless Stereo) mode.
- Volume Up / Mono Button (VOL+ MONO): Short press to increase volume. Long press for 3 seconds to turn on/off Mono mode.
- Nút Bài hát Trước (⏮): Short press for previous song. Long press for 3 seconds to fast rewind.
- Nút Bài hát tiếp theo (⏰): Short press for next song. Long press for 3 seconds to fast forward.
Image: Detailed diagram of the amplifier's control panel, labeling each button and its corresponding function for power, mode, volume, TWS, mono, and track navigation.
5.2 Ghép nối Bluetooth
- Đảm bảo amplifier is powered on. The blue Bluetooth indicator light will blink, indicating it is in pairing mode.
- Trên thiết bị di động của bạn (điện thoại thông minh, máy tính bảng, v.v.), hãy vào cài đặt Bluetooth.
- Tìm kiếm available devices and select "Herdio" or the specific model name (e.g., "AMP-BTX01") to connect.
- Once connected, the blue Bluetooth indicator light on the amplifier will become constant.
- You can now play audio from your device through the Herdio speakers.
Image: A golf cart with Herdio speakers installed, illustrating Bluetooth connectivity from a smartphone to the speakers, indicating wireless audio streaming.
6. Bảo trì
To ensure the longevity and optimal performance of your Herdio Marine Speakers, follow these maintenance guidelines:
- Vệ sinh: Sử dụng một mềm, damp cloth to wipe down the speakers and amplifier. Avoid harsh chemicals, solvents, or abrasive cleaners, as these can damage the surfaces.
- Tiếp xúc với nước: While the speakers are waterproof (IP66 rated), prolonged submersion is not recommended. Ensure all connections are secure and protected from direct water spray when possible.
- Kho: If storing the speakers for an extended period, especially in harsh conditions, disconnect them from the power source and store them in a dry, protected area.
- Kiểm tra kết nối: Periodically inspect all wiring connections to ensure they remain tight and free from corrosion. Loose connections can lead to poor sound quality or system malfunction.
- Các yếu tố môi trường: Avoid exposing the speakers to extreme temperatures or direct, prolonged sunlight when not in use, as this can degrade materials over time.
Image: A Herdio speaker being splashed with water, visually confirming its waterproof capabilities for marine and outdoor use.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your Herdio Marine Speakers, refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Không có điện | Loose power connection; Battery drained; Amptắt lifier. | Check power cable connections to amplifier and battery. Ensure battery has charge. Long press the power button on the amplifier để bật nó lên. |
| Không có âm thanh | Incorrect mode selected; Volume too low; Loose speaker wires; Device not paired. | Press MODE button to select correct input. Increase volume on amplifier and connected device. Check speaker wire connections. Re-pair Bluetooth device. |
| Ngắt kết nối Bluetooth | Device out of range; Interference; Low battery on device. | Di chuyển thiết bị gần hơn với amplifier (within 20 meters). Avoid obstacles. Charge your device. Try re-pairing. |
| Poor Sound Quality (Distortion, Static) | Volume too high; Loose speaker connections; Damaged speaker wire; Interference. | Reduce volume. Check all speaker wire connections for tightness and proper polarity. Inspect wires for damage. Move away from other electronic devices. |
| Speakers Not Rotating | Knobs are too tight. | Loosen the side knobs slightly to allow for rotation, then re-tighten once the desired angle is achieved. |
8. Bảo hành & Hỗ trợ
Herdio products are designed for reliability and performance. This product comes with a Bảo hành có giới hạn. For specific warranty details, including coverage period and terms, please refer to the warranty information provided with your purchase or contact Herdio customer support.
If you require further assistance, have questions not covered in this manual, or need to claim warranty service, please contact Herdio customer support through the retailer where you purchased the product or visit the official Herdio webtrang web để biết thông tin liên hệ.
Herdio Direct Store: Visit Herdio Store on Amazon