Otcboimo Zigbee Electric Linear Actuator Controller User Manual

1. Giới thiệu

Thank you for choosing the Otcboimo Zigbee Electric Linear Actuator Controller. This 2-channel dry contact relay switch is designed to integrate various electrical devices into your smart home system, offering remote control and automation capabilities through Zigbee technology. It is compatible with Tuya Zigbee Gateways, Amazon Alexa, Google Home, and Samsung SmartThings hubs.

This manual provides detailed instructions for the proper installation, configuration, and operation of your controller. Please read it thoroughly before use to ensure safe and efficient operation.

2. Thông tin an toàn

CẢNH BÁO: Nguy cơ Điện giật!

• Luôn ngắt nguồn điện trước khi lắp đặt hoặc bảo dưỡng thiết bị.
• Việc lắp đặt phải được thực hiện bởi thợ điện có chuyên môn hoặc theo quy định về điện của địa phương.
• Không để thiết bị tiếp xúc với độ ẩm hoặc nhiệt độ quá cao.
• Đảm bảo tất cả các kết nối dây được an toàn và cách điện đúng cách.
• This device provides dry contact outputs. Ensure external power supplies for connected loads are correctly rated and isolated.

3. Sản phẩm hếtview

The Otcboimo Zigbee Electric Linear Actuator Controller (Model: TYWB2CH-D1) is a versatile 2-channel relay switch designed for various automation tasks. It operates on Zigbee 3.0 protocol and supports RF433MHz remote control. The device features dry contact (passive) outputs, making it suitable for controlling linear actuators, garage doors, lamps, motors, and other devices requiring a switch closure.

3.1 Các tính năng chính

• Dual Channel Control: Independently control two separate circuits.
• Đầu ra tiếp xúc khô: Provides potential-free outputs (NC NO COM) for flexible voltage hỗ trợ.
• Nhiều chế độ làm việc: Supports Self-locking, Inching (Momentary), and Interlock (Locking) modes.
• Vol rộngtage Đầu vào: Operates with USB 5V or DC/AC 7V-32V input.
• Kết nối Zigbee 3.0: Seamless integration with Tuya Zigbee Hubs, Samsung SmartThings, and Amazon Echo devices.
• RF433MHz Support: Allows for local control via compatible RF433MHz remote controllers.
• Tích hợp nhà thông minh: Compatible with Tuya APP, Amazon Alexa, and Google Home for voice and remote control.

3.2 Bố cục thiết bị

Hình 3.1: Mặt trước view of the Otcboimo Zigbee Electric Linear Actuator Controller, showing input terminals, mode buttons, and output terminals.

4. Thông số kỹ thuật

5. Thiết lập

5.1 Điều kiện tiên quyết

• A compatible Tuya Zigbee Hub (required for Tuya APP, Alexa, Google Home integration).
• Stable Wi-Fi network for the Zigbee Hub.
• Appropriate power supply (USB 5V or DC/AC 7V-32V) for the controller.
• Tools for wiring (screwdriver, wire strippers).

5.2 Hướng dẫn đấu dây

The controller has two input terminals (USB 5V or DC/AC 7V-32V) and two sets of output terminals (NC, NO, COM) for each channel. The outputs are dry contacts, meaning they provide a switch closure without supplying power to the connected device. An external power source is required for the load.

Figure 5.1: Wiring diagram for connecting the controller to a linear motor. Note that the interlock mode must be set via the mode button for this application.

Connecting to a Linear Motor: For controlling a linear motor's forward and reverse motion, connect the motor's forward and reverse wires to the respective NO (Normally Open) terminals of the two channels, with a common wire connected to the COM terminal. Ensure the controller is set to interlock mode for proper operation.

Figure 5.2: Wiring diagram for connecting the controller to a lamp in self-locking mode. This shows two examples: one using NC (Normally Closed) and COM, and another using NO (Normally Open) and COM.

Connecting to a Lamp (Self-locking Mode): To control a lamp or similar on/off device, connect the lamp's power line through the COM and NO (or NC, depending on desired default state) terminals of one channel. An external AC or DC power source for the lamp là bắt buộc.

Figure 5.3: Wiring diagram for connecting the controller to an AC motor, such as a roller blind or shutter motor. This typically involves connecting Neutral to the motor and Live through the controller's output terminals for open/close functions.

Connecting to an AC Motor: For AC motors like those found in roller blinds or shutters, connect the motor's control lines (e.g., open, close) to the controller's output terminals. Ensure the AC input for the motor is correctly wired and isolated from the controller's DC/AC input.

5.3 Zigbee Pairing

To connect your controller to your smart home system, follow these steps:

1. Bật nguồn: Connect the controller to its power supply (USB 5V or DC/AC 7V-32V).
2. Open Tuya APP: Ensure your Tuya Zigbee Hub is already set up and online in the Tuya Smart or Smart Life app.
3. Thêm thiết bị: In the Tuya APP, go to your Zigbee Hub and select "Add sub-device" or "Tìm kiếm new devices."
4. Vào Chế độ Ghép nối: On the controller, press and hold the Zigbee pairing button (refer to Figure 3.1 for location) for approximately 5-8 seconds until the LED indicator starts blinking rapidly.
5. Xác nhận ghép nối: The app should discover the device. Follow the on-screen prompts to add and name your controller.
6. Direct Connection (Samsung SmartThings / Amazon Echo):
   • For Samsung SmartThings hub and Amazon Echo devices (e.g., Echo Plus, Echo Show 2nd Gen), you may be able to connect directly without a Tuya Zigbee hub.
   • Initiate device discovery on your SmartThings app or by voice command to your Echo device ("Alexa, discover devices").
   • Put the controller into pairing mode as described in step 4.

6. Hướng dẫn vận hành

6.1 Chế độ làm việc

The controller supports three working modes: Self-locking, Inching (Momentary), and Interlock (Locking). These modes define how the relay outputs behave when triggered. The mode can be selected using the "Mode Switch" button on the device (refer to Figure 3.1).

• Chế độ tự khóa: Press the button once to turn the relay ON, press again to turn it OFF. Each channel operates independently.
• Inching (Momentary) Mode: The relay turns ON when the button is pressed and automatically turns OFF after a short delay (e.g., 0.5-1 second) when the button is released. Ideal for momentary actions like garage door openers.
• Interlock (Locking) Mode: When one channel is turned ON, the other channel automatically turns OFF. This prevents both channels from being active simultaneously, useful for controlling motors with forward/reverse functions.

Note: Refer to the device's specific LED indicators or manual for precise mode selection procedures.

6.2 APP Remote Control (Tuya APP)

Once paired with your Tuya Zigbee Hub, you can control the device via the Tuya Smart or Smart Life app:

• Điều khiển bật/tắt: Toggle the status of each channel remotely.
• Lịch trình thời gian: Set schedules to automatically turn devices on or off at specific times.
• Chia sẻ thiết bị: Share control of the device with family members through the app.
• Tự động hóa cảnh: Create smart scenes to automate actions based on conditions (e.g., turn on lights when motion is detected).

6.3 Điều khiển bằng giọng nói (Alexa / Google Home)

After linking your Tuya account to Amazon Alexa or Google Home, you can use voice commands:

• Alexa: "Alexa, turn on [Device Name]", "Alexa, turn off [Device Name]".
• Trang chủ Google: "Hey Google, turn on [Device Name]", "Hey Google, turn off [Device Name]".

Note: A Tuya Zigbee hub is required for Alexa/Google Home integration.

6.4 RF433MHz Remote Control

The controller supports pairing with RF433MHz remote controllers for local operation.

Figure 6.1: Diagram illustrating the connection for RF433MHz remote control modification. Note that the controller should be set to inching mode for typical remote button operation.

6.4.1 Pairing with RF433MHz Remote

1. Press the RF433 pairing button on the device (refer to Figure 3.1) for 3 seconds.
2. Wait until the blue LED indicator turns on.
3. Press any button on your RF433MHz remote controller.
4. The device will pair successfully, indicated by the LED.

6.4.2 Clearing RF433MHz Pairing

1. Press the RF433 pairing button on the device for 8 seconds.
2. Wait until the blue LED indicator turns off. This indicates that all paired RF433MHz remotes have been cleared.

7. Bảo trì

• Giữ thiết bị sạch sẽ và không có bụi.
• Tránh để thiết bị tiếp xúc trực tiếp với ánh nắng mặt trời, độ ẩm cao hoặc nhiệt độ quá cao hoặc quá thấp.
• Không tự ý tháo rời hoặc sửa chữa thiết bị. Vui lòng liên hệ với nhân viên có trình độ để được hỗ trợ.
• Thường xuyên kiểm tra độ chắc chắn của các mối nối dây điện và xem có dấu hiệu hao mòn hay không.

KHAI THÁC. Xử lý sự cố

9. Bảo hành và Hỗ trợ

Otcboimo products are manufactured to high quality standards. For warranty information and technical support, please refer to the product packaging or contact your retailer. You can also visit the official Otcboimo webTrang web này cung cấp các nguồn hỗ trợ và thông tin liên hệ mới nhất.

Thông tin liên lạc:

• Nhà sản xuất: Otcboimo
• Webđịa điểm: www.otcboimo.com (Placeholder, please verify actual webđịa điểm)
• E-mail: support@otcboimo.com (Placeholder, please verify actual email)

Disclaimer: Information in this manual is subject to change without notice. Otcboimo reserves the right to make changes in the design, specifications, and features of its products at any time without obligation to notify any person of such changes.