1. Sản phẩm hếtview
The kielle Siphon 30901010 is a high-quality, fully metallic washbasin siphon designed for efficient wastewater drainage and odor prevention. Its robust construction ensures durability and increased scratch resistance. This siphon is suitable for connection to drain pipes with a diameter of 32 mm.
Các tính năng chính bao gồm:
- Full metal construction for enhanced durability.
- Easy connection to 32 mm diameter drain pipes.
- Flow rate of 30 liters per minute.
- Integrated odor trap with a 50 mm water seal.
Hình 1: The kielle Siphon 30901010, showcasing its metallic finish and design.
2. Thông tin an toàn
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or injury.
- Always turn off the water supply to the washbasin before beginning installation or maintenance.
- Đeo thiết bị bảo hộ cá nhân phù hợp, chẳng hạn như găng tay và kính bảo vệ mắt, trong quá trình lắp đặt.
- Ensure all connections are securely tightened to prevent leaks. Do not overtighten, as this can damage components.
- Nếu bạn không chắc chắn về bất kỳ phần nào của quá trình lắp đặt, hãy tham khảo ý kiến của thợ sửa ống nước có trình độ.
- Để những bộ phận nhỏ xa tầm tay trẻ em.
3. Nội dung gói hàng
Xác minh rằng tất cả các thành phần đều có sẵn và không bị hư hỏng trước khi tiến hành cài đặt.
- Siphon body (under-plasterwork part)
- Nut for connecting the 5/4" outlet
- Metallic rosette
- Sealing gaskets (if not pre-installed)
4. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Số hiệu mẫu | 30901010 |
| Thương hiệu | kielle |
| Vật liệu | Brass with chrome finish |
| Connection to Drain Pipe | Ø32mm |
| Odor Trap (Water Seal) | 50mm |
| Tốc độ dòng chảy | 30 l/phút |
| Màu sắc | Kim loại |
Hình 2: Technical drawing of the kielle Siphon 30901010, showing key dimensions and connections. Note the G 5/4" connection for the washbasin outlet and the Ø32 mm connection for the drain pipe.
5. Cài đặt
Follow these steps for proper installation of your kielle Siphon 30901010.
- Chuẩn bị khu vực: Ensure the water supply to the washbasin is turned off. Clear the area under the washbasin để dễ dàng truy cập.
- Tháo ống siphon cũ (nếu có): Place a bucket under the existing siphon to catch any residual water. Loosen the nuts connecting the old siphon to the washbasin drain and the wall drain pipe. Carefully remove the old siphon.
- Install Siphon Body: Attach the siphon body to the washbasin drain outlet. Ensure the sealing gasket is correctly positioned between the washbasin drain and the siphon body. Tighten the nut (5/4" connection) by hand, then use a wrench for a final snug fit, being careful not to overtighten.
- Connect to Drain Pipe: Connect the horizontal outlet of the siphon to the wall drain pipe (Ø32 mm). Use the provided nut and sealing gasket. Ensure a proper seal to prevent leaks.
- Attach Rosette: Slide the metallic rosette against the wall to cover the connection point, if applicable.
- Kiểm tra rò rỉ: Once all connections are secure, slowly turn on the water supply to the washbasinĐiền vào chỗ trống basin and then drain the water, observing all connections for any signs of leakage. If leaks occur, tighten the respective connections slightly. Do not overtighten.
Ghi chú: For under-plasterwork installations, ensure the siphon body is correctly integrated into the wall structure according to local plumbing codes.
6. Hoạt động
The kielle Siphon 30901010 operates passively to prevent sewer gases from entering your living space while allowing wastewater to drain efficiently. The U-bend design maintains a water seal (50 mm) that blocks odors. No user interaction is required for its basic operation beyond ensuring proper installation and occasional maintenance.
7. Bảo trì
Regular maintenance helps ensure the longevity and proper function of your siphon.
- Vệ sinh: Periodically clean the siphon to prevent blockages from hair, soap scum, and other debris. This can be done by unscrewing the bottom cap (if present) or by disassembling the siphon. Always place a bucket underneath to catch water and debris.
- Tránh các hóa chất mạnh: Do not use harsh chemical drain cleaners, as these can damage the chrome finish and internal components over time. Use natural alternatives or a plumbing snake for stubborn clogs.
- Kiểm tra rò rỉ: Occasionally inspect the connections for any signs of drips or leaks. Tighten connections as needed, but avoid overtightening.
- Chăm sóc bề mặt: Clean the exterior chrome finish with a soft cloth and mild, non-abrasive cleaner.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Thoát nước chậm | Partial blockage in the siphon or drain pipe. | Clean the siphon by disassembling it or using a plumbing snake. Avoid chemical drain cleaners. |
| Rò rỉ nước | Kết nối lỏng lẻo hoặc miếng đệm bị hỏng. | Check and tighten all nuts. Inspect gaskets for damage and replace if necessary. Ensure gaskets are properly seated. |
| Mùi hôi thối | Siphon water seal has evaporated or is compromised; blockage. | Run water for a minute to refill the water seal. If odors persist, check for blockages or ensure the siphon is correctly installed and sealed. |
9. Bảo hành và Hỗ trợ
Specific warranty information for the kielle Siphon 30901010 is typically provided at the point of purchase or within the product packaging. Please refer to your purchase documentation for details regarding warranty coverage and duration.
For technical support, spare parts, or further assistance, please contact kielle customer service through their official website or the retailer from whom you purchased the product. When contacting support, please have your model number (30901010) and purchase date available.