ERYUE LED Motorcycle Tail Light with Integrated Turn Signals User Manual

1. Giới thiệu

Thank you for choosing the ERYUE LED Motorcycle Tail Light with Integrated Turn Signals. This product is designed to enhance visibility and safety for your motorcycle. It features a super bright LED tail light with integrated running, brake, and sequential turn signal functions. This manual provides essential information for proper installation, operation, and maintenance of your new tail light.

This tail light is a direct replacement for various Yamaha models, including YZF R3, R25, Y15ZR, MT07, FZ07, and LC150.

2. Thông tin an toàn

Please read all safety warnings and instructions carefully before installation and use. Failure to follow these instructions may result in electrical shock, fire, and/or serious injury.

• Always disconnect the motorcycle's battery before performing any electrical work.
• Đảm bảo tất cả các kết nối đều an toàn và cách điện đúng cách để tránh hiện tượng đoản mạch.
• If you are unsure about the installation process, consult a qualified motorcycle technician.
• Không được tự ý sửa đổi sản phẩm dưới bất kỳ hình thức nào, vì điều này có thể làm mất hiệu lực bảo hành và gây nguy hiểm đến an toàn.
• This product is designed for 12V DC motorcycle electrical systems only.

3. Nội dung gói hàng

Kiểm tra kỹ xem tất cả các mặt hàng có đầy đủ và không bị hư hại khi mở gói hàng.

• 1 x ERYUE LED Motorcycle Tail Light with Integrated Turn Signals

Note: Additional tools and wiring connectors may be required for installation and are not included.

4. Thiết lập & Cài đặt

This tail light features an easy plug-and-play installation with an included sub-harness. However, basic mechanical and electrical knowledge is recommended.

4.1 Các công cụ cần thiết (Không bao gồm)

• Bộ tua vít (Phillips và Flathead)
• Bộ cờ lê ổ cắm
• Wire strippers/crimpers (if custom wiring is needed)
• Băng keo điện hoặc ống co nhiệt

4.2 Các bước cài đặt

1. Chuẩn bị xe máy:

   Park the motorcycle on a stable, level surface. Turn off the ignition and remove the key. Disconnect the negative terminal of the motorcycle battery to prevent accidental electrical shorts during installation.
2. Access the Existing Tail Light:

   Locate and remove any fairings, seats, or panels necessary to access the existing tail light assembly and its wiring. Refer to your motorcycle's service manual for specific instructions on removing these components.

3. Remove the Old Tail Light:

   Unplug the wiring harness from the existing tail light. Unscrew or unbolt the old tail light from its mounting points and carefully remove it.

   

   Image 1: ERYUE LED Tail Light installed on a motorcycle, displaying the running light function.
4. Install the New ERYUE Tail Light:

   Position the new ERYUE LED Tail Light into the mounting location. Secure it using the original screws or bolts. Ensure it is firmly seated and aligned correctly.

   

   Hình ảnh 2: Mặt trước view of the ERYUE LED Tail Light, highlighting the smoked lens design.

5. Kết nối dây điện:

   Connect the included sub-harness to the new tail light and then to the motorcycle's existing wiring harness. The plug-and-play design should make this straightforward. Ensure the connectors click into place securely.

   Wiring Color Code (Typical):

   • Đen: Đất (-)
   • Màu đỏ: Brake Light (+)
   • Màu xanh lá: Running Light (+)
   • Màu vàng: Left Turn Signal (+)
   • Màu xanh da trời: Right Turn Signal (+)

   Note: Actual wire colors on your motorcycle may vary. Always verify with a multimeter or your motorcycle's wiring diagram if unsure.

   

   Hình ảnh 3: Phía sau view of the ERYUE LED Tail Light, showing the integrated wiring harness.

6. Kiểm tra đèn:

   Reconnect the motorcycle battery. Turn on the ignition and test all functions: running light, brake light, left turn signal, and right turn signal. Ensure all lights illuminate correctly and the sequential turn signals operate as expected.

   

   Image 4: ERYUE LED Tail Light displaying the bright red brake light function.
   

   Image 5: ERYUE LED Tail Light with the amber sequential turn signal illuminated.

7. Lắp ráp lại:

   Once all functions are verified, carefully reassemble any removed fairings, seats, or panels.

5. Hướng dẫn vận hành

The ERYUE LED Motorcycle Tail Light operates automatically with your motorcycle's electrical system.

• Đèn chạy bộ: When the motorcycle's ignition is on and headlights are activated, the tail light will illuminate with a low-brightness red light.
• Đèn phanh: When the brake lever or pedal is applied, the tail light will illuminate with a high-brightness red light. It also features a stop alert function, where the brake light flashes 3 times rapidly when the brakes are first applied, then remains solid.
• Đèn báo rẽ: When the left or right turn signal switch is activated, the corresponding side of the tail light will illuminate with sequential amber LEDs, indicating the direction of the turn.

6. Bảo trì

The ERYUE LED Motorcycle Tail Light is designed for durability and requires minimal maintenance.

• Vệ sinh: Làm sạch ống kính bằng vải mềm, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the plastic lens.
• Điều tra: Periodically check the tail light for any signs of damage, loose connections, or moisture ingress. Ensure all mounting hardware remains secure.
• Chống thấm nước: The product has an IPX66 waterproof rating, meaning it is protected against powerful water jets. However, avoid submerging the light. Ensure all seals and connections are intact after installation.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your ERYUE LED Motorcycle Tail Light, refer to the following common problems and solutions:

8. Thông số kỹ thuật

Detailed technical specifications for the ERYUE LED Motorcycle Tail Light.

9. Bảo hành & Hỗ trợ

ERYUE products are manufactured to high-quality standards. For warranty information and customer support, please refer to the retailer where you purchased this product or visit the official ERYUE webđịa điểm.

Vui lòng giữ lại bằng chứng mua hàng để yêu cầu bảo hành.