Sản phẩm trênview
The Alpine S2-S40 Next-Generation S-Series 4-inch Coaxial Speaker Set is designed to deliver high-quality audio performance. These speakers are Hi-Res Audio Certified, capable of reproducing frequencies up to 40kHz for accurate and natural sound reproduction.
Constructed with a unique blend of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S40 speakers offer a lightweight design, high output, and minimal distortion, contributing to a clean and precise audio experience.
The integrated Alpine-exclusive High Amplitude Multi-Roll (HAMR) surround technology facilitates maximum cone movement, which is essential for producing powerful and accurate bass notes. Despite their compact 4-inch woofer size and integrated 3/4-inch tweeters, these speakers can handle a maximum peak power of 140W and a maximum RMS power of 45W, ensuring robust audio delivery.
The S2-S40 speakers are engineered for straightforward installation, making them suitable for upgrading existing car audio systems.
Figure 1: Alpine S2-S40 4-inch Coaxial Speaker Set
Hướng dẫn cài đặt
1. Tháo dỡ
Carefully remove all components from the packaging. Verify that all parts are present according to the product's packing list. Keep the packaging for future transport or storage.
2. Lắp đặt
Select a suitable mounting location in your vehicle, typically in door panels or dashboard. Ensure the chosen location provides adequate clearance for the speaker's depth and diameter. Use the provided mounting hardware to secure the speakers firmly. Avoid over-tightening screws, which can damage the speaker frame.
Hình 2: Mặt trước view of Alpine S2-S40 speaker, showing mounting tabs
3. Hệ thống dây điện
Connect the speaker wires to the appropriate terminals on the speaker and your car's audio system or amplifier. Observe correct polarity: connect the positive (+) terminal of the speaker to the positive output of the amplifier, and the negative (-) terminal to the negative output. Incorrect polarity can lead to reduced sound quality and phase issues.
- Kết nối tích cực: Typically marked with a red wire or a '+' symbol.
- Kết nối tiêu cực: Typically marked with a black wire or a '-' symbol.
Ensure all connections are secure to prevent intermittent sound or short circuits. If connecting to an external amplifier, tham khảo amplifier's manual for specific wiring instructions and gain settings.
Hình 3: Phía sau view of Alpine S2-S40 speaker, highlighting wiring terminals
Hoạt động
1. Khởi động ban đầu
After installation, turn on your car's audio system. Start with the volume at its lowest setting. Gradually increase the volume to confirm that sound is being produced clearly from both speakers. Listen for any unusual noises or distortions.
2. Điều chỉnh âm thanh
Adjust the balance and fade settings on your head unit to ensure sound is evenly distributed. Utilize the equalizer (EQ) settings to fine-tune the audio to your preference. Avoid excessively boosting bass or treble, which can lead to distortion or speaker damage at high volumes.
Chăm sóc và bảo dưỡng
1. Vệ sinh
To clean the speakers, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the speaker cones and surrounds.
2. Chăm sóc chung
Protect the speakers from direct sunlight, extreme temperatures, and excessive moisture. Ensure that no foreign objects fall into the speaker grilles. Regular inspection for loose connections or physical damage is recommended.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Không có âm thanh từ loa | Loose or incorrect wiring; audio source issue; ampBộ khuếch đại bị tắt hoặc bị lỗi. | Check all wiring connections for proper polarity and security. Verify audio source is playing. Ensure amplifier đã được bật nguồn và hoạt động bình thường. |
| Âm thanh bị méo hoặc không rõ ràng | Volume too high; incorrect amplifier gain settings; damaged speaker; poor audio source quality. | Giảm âm lượng. Điều chỉnh amplifier gain to match head unit output. Test with a different audio source. Inspect speakers for physical damage. |
| Âm thanh ngắt quãng | Dây dẫn bị lỏng; dây loa bị lỗi. | Inspect all speaker wire connections for looseness. Replace damaged speaker wires. |
Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Thương hiệu | núi cao |
| Số hiệu mẫu | S2-S40 |
| Loại loa | Đồng trục |
| Kích thước loa | 4 inch |
| Đường kính loa trầm | 4 inch |
| Công suất đầu ra tối đa của loa | 140 watts (Peak) |
| Xử lý nguồn RMS | 45 watt |
| Đáp ứng tần số | 97 Hz - 40 kHz |
| Công nghệ kết nối | Coaxial, Wired |
| Chế độ đầu ra âm thanh | Âm thanh độ phân giải cao |
| Kiểu lắp đặt | Giá đỡ xe hơi |
| Trọng lượng sản phẩm | 3.4 pound |
| Kích thước sản phẩm (D x R x C) | 3.9" x 7.6" x 10.5" |
| Thiết bị tương thích | Hệ thống giải trí trên xe hơi |
| Tương thích với loại xe | Xe hơi |
Thông tin bảo hành
The Alpine S2-S40 speaker set comes with a Bảo hành 1 năm của nhà sản xuất. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Alpine customer support.
Hỗ trợ khách hàng
For further assistance, technical support, or warranty inquiries, please contact Alpine customer service. You can typically find contact information on the official Alpine webtrang web hoặc thông qua đại lý được ủy quyền của bạn.
When contacting support, please have your product model number (S2-S40) and proof of purchase readily available.