Giới thiệu
The D-Link DMS-108 is an 8-Port 2.5GB Unmanaged Multi-Gigabit Switch designed to enhance network performance for devices requiring high-speed data transfer. This switch is ideal for connecting 2.5G NAS, 2.5G PCIe Adapters, 2.5G Servers, gaming PCs, and Wi-Fi 6 Access Points with 2.5G WAN ports. It features a durable metal housing, fanless design for silent operation, and supports energy-efficient Ethernet (EEE) to reduce power consumption.
This manual provides instructions for setting up, operating, maintaining, and troubleshooting your DMS-108 switch.
Hình ảnh: Mặt trước view of the D-Link DMS-108 switch, showing 8 Ethernet ports and LED indicators.
Nội dung gói
Xác minh rằng gói của bạn chứa các mục sau:
- Bộ chuyển mạch đa Gigabit không được quản lý 8 cổng 2.5 GB D-Link DMS-108
- Bộ đổi nguồn
- Hướng dẫn Cài đặt Nhanh (QIG)
Nếu có bất kỳ mặt hàng nào bị thiếu hoặc hư hỏng, vui lòng liên hệ với đại lý D-Link tại địa phương để được hỗ trợ.
Cài đặt
Cài đặt vật lý
The DMS-108 switch can be placed on a desktop or mounted on a wall. Ensure the installation location provides adequate ventilation and is free from excessive heat, humidity, or electromagnetic interference.
Kết nối công tắc
- Kết nối nguồn điện: Connect the provided power adapter to the power input port on the rear panel of the DMS-108 switch. Plug the other end of the power adapter into a standard electrical outlet. The power LED on the front panel will illuminate.
Image: Rear panel of the DMS-108, highlighting the power input (12V===1A), ground screw (SWITCH GND), and Kensington lock slot. - Kết nối thiết bị mạng: Connect your network devices (e.g., computers, NAS, Wi-Fi 6 APs, gaming consoles) to any of the 8 available 2.5 Gigabit Ethernet ports using standard Ethernet cables (Cat5e or Cat6 recommended for optimal performance).
Image: The D-Link DMS-108 switch demonstrating compatibility with existing Cat5e and Cat6 cables for 2.5x faster transfer rates.
The DMS-108 is a plug-and-play device, requiring no software installation or configuration. It will automatically detect the link speeds of connected devices (100Mb/1G/2.5G) and adjust for optimal performance.
Vận hành công tắc
Đèn báo LED
The front panel of the DMS-108 features LED indicators for each port and for power status. These LEDs provide visual feedback on the switch's operation:
- Đèn LED nguồn: Indicates if the switch is powered on.
- Đèn LED liên kết/hoạt động (mỗi cổng):
- Solid Green: Indicates a stable 2.5G network link.
- Solid Blue: Indicates a stable 1G network link.
- Solid Amber: Indicates a stable 100Mb network link.
- Flashing: Indicates network activity (data transmission).
- Tắt: Không có liên kết hoặc thiết bị nào được kết nối.
Hình ảnh: Một chi tiết view of the DMS-108's front panel, highlighting the Link/Act LEDs for each of the 8 ports.
Các tính năng chính
- Tự động đàm phán: Automatically senses the link speeds of connected devices (100Mb/1G/2.5G) and adjusts for compatibility and optimal performance.
- Chất lượng dịch vụ (QoS): Allows network traffic to be classified into 8 priority levels, ensuring critical data (e.g., gaming, video streaming) receives preferential treatment.
- Kiểm soát lưu lượng: Helps minimize dropped packets during periods of high network congestion, leading to more reliable connections.
- IGMP Snooping: Optimizes multicast data streams, which is beneficial for bandwidth-intensive applications like IPTV, by forwarding multicast traffic only to ports that have requested it.
- Energy-Efficient Ethernet (EEE) (IEEE 802.3az): Reduces power consumption during periods of low network activity, conserving energy and lowering operational costs.
Image: An illustration demonstrating how the DMS-108 switch can upgrade a network to ultra-fast multi-gigabit speeds by connecting various devices.
Image: The DMS-108 switch highlighting its durable metal casing, silent fanless design, energy-efficient features, and D-Link's 35+ years of experience.
BẢO TRÌ
To ensure optimal performance and longevity of your D-Link DMS-108 switch, follow these maintenance guidelines:
- Thông gió: Ensure the switch is placed in a location with adequate airflow. Do not block the ventilation holes on the sides of the device.
- Vệ sinh: Periodically clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners, as they may damage the device.
- Quản lý cáp: Giữ cho cáp mạng được ngăn nắp và không bị gấp khúc hoặc uốn cong quá mức để tránh suy giảm tín hiệu.
- Nguồn điện: Use only the power adapter provided with the switch. If the power adapter is damaged, contact D-Link support for a replacement.
- Cập nhật chương trình cơ sở: As an unmanaged switch, the DMS-108 typically does not require firmware updates. However, always refer to the D-Link support website for any specific recommendations.
Xử lý sự cố
If you encounter issues with your DMS-108 switch, refer to the following troubleshooting tips:
- Không có điện:
- Check if the power adapter is securely connected to the switch and the electrical outlet.
- Hãy kiểm tra xem ổ cắm điện có hoạt động bình thường hay không bằng cách cắm một thiết bị khác vào.
- Ensure the power LED on the switch is illuminated.
- Không có liên kết trên cổng:
- Hãy đảm bảo cáp Ethernet được kết nối chắc chắn với cả cổng chuyển mạch và thiết bị được kết nối.
- Hãy kiểm tra xem thiết bị được kết nối đã được bật nguồn và bộ chuyển đổi mạng của nó đã được kích hoạt chưa.
- Hãy thử sử dụng một cáp Ethernet khác để loại trừ khả năng cáp bị lỗi.
- Hãy thử với một cổng khác trên thiết bị chuyển mạch.
- Check the Link/Act LED for the specific port. If it's off, there's no active connection.
- Tốc độ mạng chậm:
- Ensure you are using Cat5e or Cat6 Ethernet cables for 2.5G connections. Older cables (e.g., Cat5) may limit speed.
- Verify that your connected devices support 2.5G Ethernet. The switch will operate at the highest common speed.
- Check the Link/Act LED color for the port to confirm the negotiated speed (Green for 2.5G, Blue for 1G, Amber for 100Mb).
- Reduce network congestion by limiting simultaneous bandwidth-intensive activities.
- Kết nối không liên tục:
- Kiểm tra tất cả các mối nối cáp xem có bị lỏng hoặc hư hỏng không.
- Ensure the switch is not overheating. Provide adequate ventilation.
- Tránh đặt công tắc gần các nguồn gây nhiễu điện từ mạnh.
If problems persist, contact D-Link Technical Support for further assistance.
Thông số kỹ thuật
| Tính năng | Sự miêu tả |
|---|---|
| Thương hiệu | Liên kết D |
| Số hiệu mẫu | DMS-108 |
| Số lượng cổng | 8 |
| Giao diện | RJ45 |
| Tốc độ truyền dữ liệu | Up to 40 Gigabits Per Second (Switching Capacity) |
| Loại công tắc | Multi-speed or Multi-gigabit Store-and-Forward |
| Case Material Type | Kim loại |
| Màu sắc | Đen |
| Kích thước sản phẩm (L x W x H) | Dài 5.71" x Rộng 3.34" x Cao 1.1" |
| Trọng lượng sản phẩm | 0.77 Bảng Anh |
| Đánh giá nhiệt độ trên | 40 độ C |
| Các thành phần bao gồm | Device, Power Supply, QIG |
| Mã số UPC | 790069470509 |
Thông tin bảo hành
The D-Link DMS-108 switch comes with a Limited Warranty. For detailed information regarding the terms and conditions of your warranty, please refer to the official D-Link webtrang web hoặc thẻ bảo hành đi kèm với sản phẩm của bạn.
Optional protection plans may be available for purchase, offering extended coverage beyond the standard manufacturer's warranty. Please check with your retailer for details on available protection plans.
Ủng hộ
For technical support, product registration, or to download the latest documentation and software, please visit the official D-Link support webđịa điểm:
You can also find additional resources and frequently asked questions on the D-Link webđịa điểm.
Video sản phẩm
Watch the official D-Link video for an overview of D-Link Switch Solutions for various environments.