Giới thiệu
This manual provides detailed instructions for the proper use and care of your Casio Edifice EFB-680D-1AVUDF chronograph watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. Keep this manual for future reference.
Cài đặt
1. Cài đặt thời gian
Để đặt thời gian trên đồng hồ của bạn:
- Pull the crown out to the second click position. The second hand will move to the 12 o'clock position.
- Rotate the crown to set the hour and minute hands to the desired time. Ensure the AM/PM setting is correct if your watch has a 24-hour indicator.
- Đẩy núm chỉnh giờ trở lại vị trí bình thường. Kim giây sẽ tiếp tục chuyển động.
Hình ảnh: Bên view of the watch, illustrating the crown and pushers used for time setting and chronograph operation.
2. Cài đặt ngày
Để đặt ngày:
- Kéo núm chỉnh ra đến vị trí nấc đầu tiên.
- Rotate the crown to adjust the date. Avoid setting the date between 9:00 PM and 1:00 AM, as this may interfere with the automatic date change mechanism.
- Đẩy vương miện trở lại vị trí bình thường.
3. Điều chỉnh dây đeo
The stainless steel band can be adjusted by adding or removing links to achieve a comfortable fit. This procedure typically requires specialized tools and is best performed by a qualified jeweler or watch technician to prevent damage to the band or clasp.
Image: The watch displayed on a wrist, demonstrating how the band fits. Proper band adjustment ensures comfort and security.
Vận hành đồng hồ bấm giờ
Your Casio Edifice EFB-680D-1AVUDF features a 1/10-second chronograph for measuring elapsed time.
- Bắt đầu đo lường: Press button A (top right pusher) to start the chronograph. The chronograph second hand and 1/10-second hand will begin moving.
- Stopping a Measurement: Press button A again to stop the chronograph. The elapsed time will be displayed.
- Đặt lại đồng hồ bấm giờ: After stopping, press button B (bottom right pusher) to reset the chronograph hands to the 12 o'clock position.
- Đo thời gian phân chia:
- Nhấn nút A để bắt đầu.
- Press button B to record a split time. The chronograph hands will stop to indicate the split time, while internal timing continues.
- Press button B again to release the split time and display the current elapsed time.
- Press button A to stop the measurement.
- Nhấn nút B để đặt lại.
The chronograph has a measuring capacity of 59 minutes, 59.9 seconds.
Bảo trì và chăm sóc
1. Khả năng chống nước
This watch is water-resistant up to 100 meters (10 ATM). This means it is suitable for everyday use, swimming, and snorkeling. Không được xoay núm chỉnh hoặc nhấn các nút khi đồng hồ bị ướt hoặc ngâm trong nước. Tránh để đồng hồ tiếp xúc với nước nóng hoặc hơi nước, vì điều này có thể làm ảnh hưởng đến khả năng chống nước của các gioăng.
2. Vệ sinh
Wipe the watch case and band periodically with a soft, dry cloth to remove dirt and moisture. For stainless steel bands, a soft brush and mild soapy water can be used, followed by thorough rinsing and drying. Ensure the crown is pushed in before cleaning with water.
3. Thay thế pin
The watch is powered by an SR920SW battery with an approximate life of 3 years. When the battery runs low, the second hand may start moving at two-second intervals to indicate a low battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and function.
4. Sapphire Crystal Care
The watch features a sapphire crystal with a glare-resistant coating, known for its high scratch resistance. While highly durable, it is not entirely scratch-proof. Avoid direct impact or contact with extremely hard materials to prevent damage.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Đồng hồ dừng hoạt động hoặc chạy không chính xác. | Pin yếu. | Hãy thay pin tại trung tâm dịch vụ được ủy quyền. |
| Chronograph hands do not reset to 12 o'clock. | Misalignment after impact or battery change. | Refer to the Casio official website for specific chronograph hand alignment procedures for your model, or consult a service center. |
| Nước xâm nhập. | Crown/pushers operated underwater, or seals compromised. | Hãy mang đồng hồ đến trung tâm bảo hành ủy quyền để kiểm tra và sửa chữa ngay lập tức. Không tự ý lau khô đồng hồ. |
Thông số kỹ thuật
- Người mẫu: EFB-680D-1AVUDF
- Case / Bezel Material: Thép không gỉ
- Chất liệu dây đeo: Thép không gỉ
- Pha lê: Sapphire crystal with glare-resistant coating
- Khả năng chống nước: 100 mét (10 ATM)
- Sự chuyển động: thạch anh
- Sự chính xác: ±20 giây mỗi tháng
- Loại pin: SR920SW
- Tuổi thọ pin xấp xỉ: 3 năm
- Biên niên sử: 1/10-second stopwatch, Measuring capacity: 59'59.9'', Measuring modes: Elapsed time, split time, 1st-2nd place times
- Kích thước (C x R x S): Approximately 46.0 x 45.8 x 10.5 mm (Case diameter 45.8mm, Case thickness 10.5mm)
- Cân nặng: Khoảng 151 g
- Kiểu móc khóa: One-touch 3-fold Clasp, Double Locking Foldover Clasp
Hình ảnh: Một mặt chuyên nghiệpfile view of the watch, highlighting its slim design and case construction.
Hình ảnh: Phía sau view of the watch, showing the screw lock back and engraved model information.
Thông tin bảo hành
Your Casio Edifice EFB-680D-1AVUDF watch comes with a manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty card included with your purchase or visit the official Casio website. Extended warranty options may also be available from authorized retailers.
Hỗ trợ khách hàng
For further assistance, technical support, or service inquiries, please contact Casio customer support. You can find contact information and frequently asked questions on the official Casio webđịa điểm:
Nhà sản xuất: Công ty TNHH Casio Ấn Độ
Địa chỉ: A-41, 1st Floor, MCIE, Mathura Road, New Delhi-110044, India
Casio chính thức Webđịa điểm: www.casio.com/in/