GOOJODOQ GD13
Hướng dẫn sử dụng bút cảm ứng GOOJODOQ GD13
Mẫu: GD13
Sản phẩm trênview
The GOOJODOQ GD13 Stylus Pen is designed for seamless interaction with compatible iPad models, offering advanced features such as wireless charging, palm rejection, and tilt sensitivity. It provides a natural writing and drawing experience, enhancing productivity and creativity.
Image: The GOOJODOQ GD13 Stylus Pen shown alongside an iPad, illustrating its magnetic attachment and wireless charging capability with battery level indicators.
Khả năng tương thích
The GD13 Stylus Pen is specifically designed for the following iPad models:
- iPad Air 4th and 5th Generation
- iPad Pro 11 inch (Thế hệ thứ nhất, thứ hai, thứ ba, thứ tư)
- iPad Pro 12.9 inch (Thế hệ thứ 3, 4, 5, 6)
- iPad Mini thế hệ thứ 6
Ghi chú: This stylus is not compatible with other iPad models or devices.
Image: A visual guide detailing compatible iPad models (Air, Pro 11, Pro 12.9, Mini) and their specific model numbers (e.g., A2567, A2072) that work with the GD13 stylus.
Thiết lập và sạc
Sạc không dây
The GD13 Stylus Pen features true wireless charging. To charge the stylus, simply attach it magnetically to the side of your compatible iPad. The stylus will automatically enter smart charging mode.
Image: The GD13 stylus magnetically attached to the side of an iPad, demonstrating its wireless charging capability and ease of storage.
Chỉ báo pin
The stylus features an indicator light to confirm battery status. The color of the light changes to reflect the charge level:
- Màu đỏ: 0-30% pin
- Màu xanh da trời: 30-70% pin
- Màu xanh lá: 70-100% pin
The indicator light will blink while charging.
Image: A visual representation of the GD13 stylus's top indicator light, showing red for low battery (0-30%), blue for medium (30-70%), and green for high (70-100%).
Hướng dẫn sử dụng
Quick Wake-up and Note-Taking
To quickly access the note-taking application, simply double-tap the screen of your compatible iPad with the GD13 Stylus Pen. This action will immediately open a blank memo, allowing you to capture inspiration without delay.
Image: A hand demonstrating the quick wake-up feature by double-tapping the iPad screen with the GD13 stylus, which instantly opens the notes application.
Palm Rejection and Tilt Sensitivity
The GD13 Stylus Pen incorporates advanced palm rejection technology, allowing you to rest your hand naturally on the iPad screen while writing or drawing without causing unintended marks. The smart tip dynamically adjusts line thickness based on the angle at which you hold the stylus, mimicking the experience of a traditional pencil.
Image: Demonstrations of palm rejection, showing a hand resting on the iPad screen while writing, and tilt sensitivity, illustrating how line thickness changes with the stylus's angle (90°, 60°, 30°).
Quick Gestures
- Access Notes: Swipe from the bottom right corner of the iPad screen towards the middle with the GD13 stylus.
- Chụp ảnh màn hình: Swipe from the bottom left corner of the iPad screen towards the middle with the GD13 stylus.
Image: Three panels illustrating quick gestures: double-tapping to open notes, swiping from bottom-right for notes, and swiping from bottom-left for screenshots.
Bảo trì và thay thế
Thay thế đầu bút stylus
The GD13 stylus tip is designed for durability but can be replaced if worn. The tip is compatible with Apple Pencil 1st/2nd generation tips, Logitech nibs, and GOOJODOQ GD12 nibs. Replacement tips can be easily purchased from most stores.
Để thay thế mẹo:
- Nhẹ nhàng xoay đầu cũ ngược chiều kim đồng hồ để tháo ra.
- Align the new tip with the stylus and twist clockwise until securely fastened.
Image: A diagram illustrating the GD13 stylus tip replacement process and highlighting its compatibility with Apple Pencil 1st/2nd Gen and Logitech nibs.
Vệ sinh
Lau sạch thân bút cảm ứng bằng vải mềm, khô. Tránh sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Stylus not connecting or responding. | Incorrect iPad model; Low battery; Bluetooth issue. | Verify iPad compatibility (refer to Compatibility section). Charge the stylus. Ensure Bluetooth is enabled on your iPad and try re-pairing if necessary. |
| Palm rejection not working. | Feature not enabled or software conflict. | Palm rejection is an inherent feature; ensure your iPad's software is up to date. Close and reopen the drawing/note-taking app. |
| Line thickness not changing with tilt. | App does not support tilt sensitivity; Stylus tip worn. | Ensure the application you are using supports tilt sensitivity. Replace the stylus tip if it appears worn. |
| Stylus not charging wirelessly. | Incorrect placement on iPad; iPad not compatible with wireless charging for stylus. | Ensure the stylus is correctly aligned and magnetically attached to the charging side of your compatible iPad. Verify your iPad model supports wireless charging for styluses. |
Thông số kỹ thuật
- Thương hiệu: GOOJODOQ
- Người mẫu: GD13
- Màu sắc: Đen
- Vật liệu: Nhôm
- Loại pin: Pin Lithium-ion (bao gồm 1 pin)
- Sạc: Sạc từ tính không dây
- Đặc trưng: Palm Rejection, Tilt Sensitivity, Quick Wake-up, Quick Gestures
- Thiết bị tương thích: iPad Pro 12.9 (3rd/4th/5th/6th Gen), iPad Pro 11 (1st/2nd/3rd/4th Gen), iPad Air (4th/5th Gen), iPad Mini (6th Gen)
Bảo hành và Hỗ trợ
For warranty information and customer support, please refer to the official GOOJODOQ webhoặc liên hệ với nhà bán lẻ. Giữ lại biên lai mua hàng để yêu cầu bảo hành.
Để được hỗ trợ thêm, bạn có thể truy cập GOOJODOQ Brand Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.