SUNLU SLUS-FD-S2-BK-US-NEW

SUNLU Official Filament Dryer S2 User Manual

Model: SLUS-FD-S2-BK-US-NEW

Giới thiệu

The SUNLU Filament Dryer S2 is an essential accessory for FDM 3D printers, designed to significantly improve 3D printing results by removing excess moisture from filaments. Filaments, especially when stored in humid environments or for extended periods, absorb moisture from the air. This moisture can lead to various printing issues such as clogging, stringing, brittleness, cracking, bubbling, poor adhesion, and layer shifts.

This filament dryer effectively removes moisture, restoring damp filaments to optimal condition. It can also function as a filament spool holder, allowing for continuous drying during the printing process, which is particularly beneficial in humid conditions.

Diagram showing common 3D printing issues caused by damp filament, such as clogging, stringing, cracking, bubbling, poor adhesion, and layer shift, with a filament spool and a printed vase.

Figure 1: Common 3D printing issues caused by moisture in filament.

Thông tin an toàn

Hãy đảm bảo thiết bị được đặt trên bề mặt ổn định, bằng phẳng và chịu nhiệt.
Không được bịt kín các lỗ thông gió trong quá trình hoạt động.
Giữ thiết bị tránh xa nước hoặc các chất lỏng khác.
Do not touch the heating elements directly when the device is in operation or immediately after use, as they can be hot.
Rút phích cắm thiết bị khỏi ổ cắm điện khi không sử dụng hoặc trước khi vệ sinh.
Để xa tầm tay trẻ em và vật nuôi.
Chỉ sử dụng bộ đổi nguồn được cung cấp.

Sản phẩm trênview

The SUNLU Filament Dryer S2 features a user-friendly design with a large touch screen for easy operation. It incorporates 360° surround heating for efficient and even drying of filament.

Diagram of the SUNLU Filament Dryer S2 with labels pointing to its features: Adjustable temperature (35-70°C), Timer function (0-99 hours), Quick set for PLA/PC/PA/ABS/TPU/PETG, Non-slip and heat insulation base, Double click to turn on the dryer, Adjustable LED ring lighting mode, Convertible temperature unit (°C & °F), Filament outlet hole for drying during print.

Figure 2: Key features and components of the SUNLU Filament Dryer S2.

Thành phần:

Filament Dryer Unit: The main device for drying filament.
Bộ đổi nguồn: For connecting the dryer to a power source.
Hướng dẫn sử dụng: Hướng dẫn này.

Image showing the contents of the SUNLU Filament Dryer S2 package: one filament dryer unit, one power adapter, and one user manual. Also shows various colored filament spools and 3D printed objects.

Figure 3: Packaging contents of the SUNLU Filament Dryer S2.

Cài đặt

Giải nén thiết bị: Cẩn thận lấy máy sấy sợi và tất cả các phụ kiện ra khỏi bao bì.
Place the Dryer: Position the dryer on a stable, flat surface near your 3D printer if you intend to print directly from it.
Insert Filament Spool: Open the lid and place your filament spool inside the dryer. Ensure the filament unwinds smoothly.
Route Filament (if printing directly): Locate the filament outlet hole on the dryer. Pull the filament through this hole. This allows the filament to be fed directly to your 3D printer while drying.
Kết nối nguồn: Find the power connector on the device and plug in the provided power adapter. Then, plug the adapter into a suitable power outlet.

Step-by-step visual guide for using the SUNLU Filament Dryer S2. Steps include: 1. Find the filament hole. 2. Pull the filament out. 3. Find the power connector. 4. Plug-in power. 5. Double click to turn on/off. 6. Click to switch menu (SET). 7. Click to increase/switch. 8. Click to turn down/toggle.

Figure 4: Setup and basic operation steps.

Hướng dẫn sử dụng

Bật/Tắt:

To turn on the dryer, double-click the power button on the touch screen.
To turn off the dryer, double-click the power button again.

Cài đặt nhiệt độ và thời gian:

The dryer allows customization of drying temperature and time to suit different filament types.

Phạm vi nhiệt độ: 35°C đến 70°C.
Phạm vi thời gian: 0 đến 99 giờ.
Use the "SET" button to navigate through the settings menu.
Use the up and down arrow buttons to adjust values for temperature and time.
The large LCD touch screen provides real-time display of present value (PV), setting value (SV), remaining time, and material type.

Khả năng tương thích dây tóc:

The SUNLU Filament Dryer S2 is compatible with a wide range of 3D printer filaments, including but not limited to:

PLA / PLA+
GỖ
PETG
ABS / ABS+
PVB
HÔNG
Nylon
ASA
TPU
PMMA
PA/Máy tính

It supports filament diameters of 1.75mm, 2.85mm, and 3.00mm.

Chart showing recommended drying temperatures and times for various filament types including PLA, WOOD, PETG, ABS, PVB, HIPS, Nylon, ASA, TPU, PMMA, and PA/PC. For example, PLA/PLA+ and WOOD are recommended 45-50°C, while Nylon, ASA, TPU are 50-55°C, and PA/PC are 60-70°C. Drying time is generally 3-6 hours.

Figure 5: Filament compatibility and recommended drying settings.

BẢO TRÌ

Vệ sinh: Before cleaning, ensure the device is unplugged and completely cooled down. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
Kho: When not in use for extended periods, store the dryer in a cool, dry place, away from direct sunlight and excessive humidity.
Kiểm tra thường xuyên: Periodically check the power cord for any damage. Ensure the filament path is clear of debris.

Xử lý sự cố

Vấn đề	Nguyên nhân có thể	Giải pháp
Thiết bị không bật nguồn.	Bộ chuyển đổi nguồn không được kết nối đúng cách; có vấn đề với ổ cắm điện.	Ensure power adapter is securely plugged into the device and a working power outlet. Double-check the power button operation (double-click to turn on).
Sợi vẫn còn damp sau khi sấy khô.	Incorrect temperature/time settings; extremely damp sợi.	Increase drying time or temperature according to filament type (refer to Figure 5). For very damp filament, multiple drying cycles may be needed. Ensure the lid is properly closed.
Device tips over when feeding filament.	Unstable placement; excessive tension on filament.	Ensure the dryer is on a stable, level surface. Minimize tension on the filament being pulled from the dryer. Consider placing the dryer at a lower height relative to the printer.
Display not showing correct humidity.	Sensor calibration; environmental factors.	The built-in hygrometer provides an indication. For precise measurements, an external hygrometer may be used. Continue drying based on recommended times for filament type.

Thông số kỹ thuật

Kích thước sản phẩm: 10.43 x 10.79 x 4.65 inch
Trọng lượng sản phẩm: 3.42 Bảng Anh
Số hiệu mẫu: SLUS-FD-S2-BK-US-NEW
Nhà sản xuất: SUNLU
Nhiệt độ làm việc tối đa: 70°C
Dry Time Adjustable Range: 1-99 giờ
Dry Temperature Adjustable Range: 35-70°C
Đặc điểm kỹ thuật đầu vào: AC 100V-240V, 50 / 60HZ
Max Working Electricity: 1.8A
Max Working Power: 48W
Kích thước màn hình LCD: 4.6 inch
Khả năng tương thích dây tóc: 1.75mm, 2.85mm, 3.00mm

Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the official SUNLU website or contact their customer service directly. A digital version of this user manual is available for download:

Tải xuống Hướng dẫn sử dụng (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.