WEEFUN Tina2 Basic V7

WEEFUN TINA2 Mini 3D Printer

Instruction Manual - Model: Tina2 Basic V7

1. Giới thiệu

Welcome to the WEEFUN TINA2 Mini 3D Printer instruction manual. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your new 3D printer. The TINA2 is designed for beginners and features auto-leveling, resume printing, and a flexible magnetic build plate, making 3D printing accessible and enjoyable.

WEEFUN TINA2 Mini 3D Printer with a blue printed figure

Figure 1.1: The WEEFUN TINA2 Mini 3D Printer, showcasing its compact design and a printed model.

Two people looking at a laptop with a 3D printer and various 3D printed models on a table

Figure 1.2: The WEEFUN TINA2 3D Printer in a home or office setting, emphasizing its user-friendly nature for creative projects.

2. Thông tin an toàn

Vui lòng đọc kỹ tất cả hướng dẫn an toàn trước khi vận hành máy in để tránh bị thương hoặc hư hỏng. Giữ lại sách hướng dẫn này để tham khảo trong tương lai.

Bộ phận chuyển động: The printer contains moving parts that can cause injury. Keep hands, hair, and clothing clear of the print head and build plate during operation.
Bề mặt nóng: The nozzle and build plate can reach high temperatures. Avoid touching these components during or immediately after printing. Allow them to cool completely before handling.
Thông gió: Operate the printer in a well-ventilated area to dissipate any fumes from melting filament.
Nguồn điện: Chỉ sử dụng bộ chuyển đổi nguồn được cung cấp kèm theo. Đảm bảo ổ cắm điện đáp ứng điện áp quy định.tage yêu cầu.
Những đứa trẻ: This product is not a toy. Children should only operate the printer under direct adult supervision.
Dây tóc: Use only recommended filament types. Incorrect filament can damage the printer or produce hazardous fumes.

3. Thành phần sản phẩm

Familiarize yourself with the main components of your WEEFUN TINA2 Mini 3D Printer:

Print Head (Extruder): Dispenses melted filament.
Tấm xây dựng: The surface where models are printed.
Người giữ dây tóc: Dùng để giữ cuộn dây filament.
LCD Screen & Control Knob: For navigating menus and controlling printer functions.
Cổng điện: Kết nối với bộ đổi nguồn.
Khe cắm thẻ SD: For loading print files.
Cổng USB: For connecting to a computer (USB cable not included).

Diagram showing various features of the WEEFUN TINA2 Mini 3D Printer including auto-leveling, flexible build bed, resume printing, auto feed filament, high precision, dual Z-axis, LCD display, and out of box setup.

Hình 3.1: Hếtview of the multi-function features of the TINA2 Mini 3D Printer.

4. Thiết lập

The WEEFUN TINA2 Mini 3D Printer comes fully assembled for a quick and easy setup process.

4.1 Tháo dỡ

Cẩn thận lấy máy in ra khỏi bao bì.
Remove all protective foam and ties.
Ensure all accessories (power adapter, filament, SD card) are present.

4.2 kết nối nguồn

Kết nối bộ chuyển đổi nguồn với cổng nguồn của máy in.
Cắm bộ đổi nguồn vào ổ cắm điện thích hợp.

4.3 Tải sợi

Đặt cuộn dây tóc vào giá đỡ dây tóc.
Feed the filament into the extruder's input hole until it is gripped by the gears.
On the printer's LCD screen, select "Load Filament" and follow the on-screen prompts. The printer will heat up and automatically feed the filament through the nozzle.

Four steps showing how to prepare filament, insert SD card, select model to print, and takedown the model.

Figure 4.1: Quick guide to the plug-and-play setup and printing process.

4.4 Tự động cân bằng

The TINA2 features an automatic bed leveling system. No manual adjustment is required for initial setup.

The printer will perform an auto-leveling sequence before each print to ensure optimal bed adhesion.

Diagram illustrating the auto-leveling function of the 3D printer, showing the nozzle probing the build plate.

Figure 4.2: The auto-leveling function ensures precise first layers without manual calibration.

5. Hướng dẫn vận hành

5.1 Chuẩn bị bản in File

The printer supports G-code files. You will need a 3D modeling software and a slicer program (e.g., Cura, PrusaSlicer) to convert 3D models (.STL, .OBJ) into G-code.
Lưu mã G file vào thẻ SD được cung cấp.

Image showing a laptop with 3D modeling software and the 3D printer, illustrating the printing method via SD card or USB cable.

Figure 5.1: The printer supports printing via SD card or USB cable (USB cable not included).

5.2 Bắt đầu in

Cắm thẻ SD vào khe cắm thẻ SD của máy in.
Bật máy in.
Using the control knob and LCD screen, navigate to "Print from SD" and select your desired G-code file.
The printer will begin the auto-leveling sequence, heat up, and then start printing.

Close-up of the LCD screen and control knob of the 3D printer, showing menu options.

Figure 5.2: The HD LCD screen and rotary knob provide an easy-to-use interface for beginners.

5.3 Chức năng in sơ yếu lý lịch

The TINA2 features a resume printing function, allowing it to continue a print from where it left off after a power outage or accidental disconnection.

If power is interrupted during a print, simply restore power. The printer will prompt you to resume the last print.

Diagram illustrating the resume printing function, showing a print paused due to power outage and then resuming.

Figure 5.3: The memory function saves filament and allows printing to resume after a sudden power outage.

5.4 Xóa dấu in

The flexible magnetic build plate makes removing finished prints easy.

Once the print is complete and the build plate has cooled, gently remove the magnetic build plate from the printer.
Flex the build plate to easily detach the printed model.

Images demonstrating the flexibility of the magnetic build plate for easy model removal.

Figure 5.4: The bendable build plate simplifies the removal of printed models.

6. Bảo trì

Bảo trì thường xuyên đảm bảo hiệu suất tối ưu và tuổi thọ của máy in 3D.

6.1 Vệ sinh tấm xây dựng

After each print, ensure the build plate is clean and free of any filament residue. Use a soft cloth and isopropyl alcohol if necessary.

6.2 Nozzle Cleaning and Replacement

If the nozzle becomes clogged, gently heat it to printing temperature and use a thin needle or cleaning filament to clear the obstruction.
For severe clogs or worn nozzles, replacement may be necessary. Refer to the manufacturer's guidelines for nozzle replacement.

Image showing the unique design for convenient and fast disassembly of the nozzle hot end.

Figure 6.1: The nozzle hot end is designed for easy disassembly for maintenance.

6.3 Bôi trơn

Periodically check the Z-axis lead screw and X/Y axis rods for dust or debris. Clean and apply a small amount of lithium grease or machine oil if needed to ensure smooth movement.

KHAI THÁC. Xử lý sự cố

Phần này đề cập đến những vấn đề phổ biến mà bạn có thể gặp phải và giải pháp tiềm năng cho chúng.

Vấn đề	Nguyên nhân có thể	Giải pháp
Sợi không đùn ra	Clogged nozzle, incorrect temperature, tangled filament.	Clean the nozzle, verify print temperature settings, ensure filament spool unwinds freely.
Bản in không dính vào tấm in	Build plate not clean, Z-offset too high, bed temperature too low.	Clean build plate with isopropyl alcohol, ensure auto-leveling completes, check bed temperature settings.
Chất lượng in kém (hiện tượng lem mực, kéo sợi)	Loose belts, incorrect print speed, retraction settings.	Check for loose belts, adjust print speed in slicer, fine-tune retraction settings.
Máy in không bật	Power cable disconnected, faulty power adapter.	Ensure power cable is securely connected, try a different power outlet, contact support if issue persists.

8. Thông số kỹ thuật

Tính năng	Chi tiết
Số hiệu mẫu	Tina2 Basic V7
Thương hiệu	TUẦN
Kích thước sản phẩm	8.27"D x 8.27"W x 11.42"H (approx. 210 x 210 x 290 mm)
Trọng lượng sản phẩm	3 pound (1.36 kg)
Công nghệ in ấn	FDM (Mô hình lắng đọng nóng chảy)
Dây tóc tương thích	PLA
Xây dựng tấm	Tấm đế từ tính linh hoạt
Cân bằng	Tự động cân bằng
Kết nối	SD Card, USB (cable not included)
Tính năng đặc biệt	Resume Printing Function, Fully Assembled, Open Source

Diagram showing the dimensions of the WEEFUN TINA2 Mini 3D Printer: 210mm width, 210mm depth, 290mm height.

Figure 8.1: Physical dimensions of the TINA2 Mini 3D Printer (approximately 210mm x 210mm x 290mm).

Diagram illustrating the dual Z-axis and dual Y-axis rails for high precision printing.

Figure 8.2: Internal structure highlighting the dual Z-axis and Y-axis for stability and precision.

9. Thông tin bảo hành

WEEFUN provides a limited warranty for the TINA2 Mini 3D Printer against defects in materials and workmanship under normal use. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for warranty claims.

Bảo hành này không bao gồm:

Damage caused by improper use, maintenance, or unauthorized modifications.
Consumable parts such as nozzles, build plates, and filament.
Thiệt hại do tai nạn, sơ suất hoặc thiên tai gây ra.

For detailed warranty terms and conditions, please refer to the official WEEFUN webtrang web hoặc liên hệ với bộ phận hỗ trợ khách hàng.

10. Hỗ trợ khách hàng

If you encounter any issues or have questions not covered in this manual, please contact WEEFUN customer support. Our team is dedicated to providing assistance and ensuring your satisfaction.

Hỗ trợ trực tuyến: Visit the official WEEFUN webTrang web cung cấp các câu hỏi thường gặp, hướng dẫn khắc phục sự cố và tải xuống phần mềm.
Hỗ trợ qua Email: For technical assistance, email our support team.
Diễn đàn cộng đồng: Join online communities for tips, tricks, and peer support.

Please have your printer's model number (Tina2 Basic V7) and purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.