QIBOX TYZJ03

QIBOX Anti-Theft Video Doorbell Mount (Model TYZJ03) Instruction Manual

1. Giới thiệu và kết thúcview

This manual provides detailed instructions for the installation, operation, and maintenance of your QIBOX Anti-Theft Video Doorbell Mount, Model TYZJ03. This mount offers a secure, no-drill installation solution for compatible video doorbells, designed to protect your device from theft and damage while allowing flexible placement on inward-swinging doors without permanent alterations.

2. Tính năng sản phẩm

  • Thiết kế chống trộm: Encapsulates the video doorbell, preventing unauthorized removal from the exterior.
  • Lắp đặt không cần khoan: Attaches securely to your door without requiring any drilling or permanent modifications.
  • Phù hợp điều chỉnh: Designed to accommodate various door thicknesses, specifically between 0.6 inches and 2.3 inches.
  • Versatile Door Compatibility: Suitable for most inward-opening doors, whether they open from the left or right. Not suitable for outward-opening doors.
  • Kết cấu bền bỉ: Manufactured from a combination of stainless steel and plastic for enhanced durability.

3. Nội dung gói hàng

Vui lòng kiểm tra xem có đầy đủ các mục trong gói hàng của bạn không:

  • 1x QIBOX Anti-Theft Video Doorbell Mount
  • Hướng dẫn cài đặt (sách hướng dẫn này)
  • Various installation accessories (screws, foam pads)

4. Khả năng tương thích

The QIBOX Anti-Theft Video Doorbell Mount is compatible with the following video doorbell models:

  • Chuông cửa hình Ring
  • Chuông cửa hình Ring 2
  • Chuông cửa hình Ring 3
  • Chuông cửa hình Ring Video 3 Plus
  • Chuông cửa hình Ring 4
  • Ring Video Doorbell (2020 Release)

Note: This mount is NOT suitable for Blink 2nd Gen (newest model) or other Blink models not explicitly listed.

The maximum dimensions for a compatible video doorbell are 2.55 inches wide x 5.11 inches high x 1.14 inches thick.

Diagram showing compatibility with various Ring and Blink video doorbell models and maximum dimensions.
Figure 1: Compatibility Chart. This image displays the various Ring and Blink video doorbell models compatible with the QIBOX mount, along with the maximum allowable dimensions for the doorbell device.

5. Cài đặt và thiết lập

Follow these steps to install your QIBOX Anti-Theft Video Doorbell Mount:

  1. Chuẩn bị núi:

    The mount consists of two main parts: the outer casing and the inner bracket. Ensure these are separated. Locate the included foam pads. Cut the thick square pad into 6 smaller square pads of equal size. Divide these into two groups of three. Remove the adhesive backing and attach three pads to the back cover of the inner bracket, ensuring they are evenly spaced to provide cushioning for your doorbell.

    Video 1: QIBOX Anti-Theft Doorbell Mount Overview. Video này cung cấp thông tin chung vềview of the QIBOX Anti-Theft Doorbell Mount, demonstrating its components and basic assembly.
    Video 2: How to Install QIBOX Anti-theft Doorbell Mount. This video demonstrates the step-by-step installation process of the QIBOX Anti-Theft Doorbell Mount, including preparing the pads and securing the doorbell.
  2. Insert Your Video Doorbell:

    Carefully place your compatible video doorbell into the outer casing of the mount. Ensure it fits snugly and is aligned correctly with the camera and button cutouts.

  3. Lắp ráp núi:

    Slide the inner bracket into the outer casing, securing your doorbell inside. Use the provided screws to fasten the inner bracket to the outer casing. This step secures your doorbell within the anti-theft enclosure.

  4. Đo độ dày cửa:

    Before attaching the mount, measure the thickness of your door. The mount is designed for doors between 0.6 inches and 2.3 inches thick. Ensure your door falls within this range for a secure fit.

    Image demonstrating how to measure door thickness for proper mount installation.
    Figure 2: Door Thickness Measurement. This image illustrates the correct method for measuring your door's thickness to ensure compatibility with the mount.
  5. Attach to Door:

    Position the assembled mount on the edge of your door. The metal bracket should wrap around the door edge, with the doorbell facing outwards. The adjustment screw should be on the inside of your door.

    QIBOX Anti-Theft Video Doorbell Mount with a compatible video doorbell installed.
    Figure 3: Installed Doorbell Mount. A view of the QIBOX Anti-Theft Video Doorbell Mount with a compatible video doorbell securely installed on a door.
  6. Điều chỉnh và bảo mật:

    Tighten the adjustment screw on the inside of the door until the mount is firmly secured and does not move. Do not overtighten, as this may damage the bracket or your door. The mount can be adjusted to position the doorbell on the left or right side of the door frame as needed.

    Diagram illustrating the adjustable left and right positioning of the doorbell mount on a door.
    Figure 4: Adjustable Positioning. This diagram shows how the mount can be adjusted to position the doorbell on either the left or right side of the door frame.
    Infographic highlighting features like all-around protection, no drilling, anti-theft, and easy removal.
    Figure 5: Key Features. An infographic detailing the benefits of the mount, including all-around protection, no drilling required, anti-theft design, and easy removal.

6. Hướng dẫn vận hành

Once the QIBOX Anti-Theft Video Doorbell Mount is securely installed, your video doorbell will function normally within the enclosure. Ensure the doorbell's camera view is unobstructed and that the button is easily accessible to visitors. The mount does not interfere with the doorbell's operational features.

A couple opening a door with the QIBOX doorbell mount installed, showing its discreet profile.
Figure 6: Discreet Installation. This image shows the doorbell mount installed on a door, highlighting its discreet and functional design.

7. Bảo trì

To ensure the longevity and optimal performance of your QIBOX Anti-Theft Video Doorbell Mount:

  • Kiểm tra thường xuyên: Periodically check the adjustment screw on the inside of your door to ensure it remains tight and secure.
  • Vệ sinh: Clean the mount and your doorbell's casing với một mềm, damp cloth. Avoid using harsh chemicals or abrasive cleaning materials, as these may damage the finish.
  • Doorbell Charging: When your video doorbell requires charging, simply loosen the internal adjustment screw, remove the mount from the door, and access your doorbell. Reinstall after charging.

KHAI THÁC. Xử lý sự cố

  • Mount feels loose on the door: Tighten the internal adjustment screw until the mount is firm. Ensure not to overtighten.
  • Doorbell does not fit inside the mount: Verify your doorbell's dimensions against the maximum compatible size (2.55" W x 5.11" H x 1.14" T) and check the compatibility list in Section 4.
  • Door does not close properly after installation: Ensure the door thickness is within the specified range (0.6 to 2.3 inches). Adjust the mount's position on the door edge to prevent obstruction.
  • Concern about doorbell theft: The anti-theft design ensures that the doorbell is fully enclosed and secured by an internal screw, making it inaccessible from the outside when the door is closed.

9. Thông số kỹ thuật

Đặc điểm kỹ thuậtChi tiết
Số hiệu mẫuTYZJ03
Trọng lượng sản phẩm10.9 ounce
Kích thước sản phẩm3.11 x 3.22 x 5.82 inch
Màu sắcĐen
Vật liệuThép không gỉ + Nhựa
Phương pháp cài đặtDoor-Mounted
Số lượng gói hàng1

10. Bảo hành và Hỗ trợ

For any problems encountered with the received product or during installation, please do not hesitate to contact QIBOX customer support. We are committed to resolving any issues immediately.

This product is covered by a return policy of 2026 days from the date of purchase.