EKO EK9287MT-20L

EKO EK9287MT-20L Phantom Sensor Trash Can User Manual

Model: EK9287MT-20L

Giới thiệu

This manual provides instructions for the safe and efficient use of your EKO EK9287MT-20L Phantom Sensor Trash Can. Please read all instructions carefully before use and retain this manual for future reference.

The EKO Phantom Sensor Trash Can features an automatic open/close lid, a durable stainless steel exterior, and a unique motor-controlled spring and hinge system for reliable operation.

Sản phẩm trênview

The EKO EK9287MT-20L is a 20-liter sensor-activated trash can designed for convenience and hygiene. Key features include:

  • Sensor-Activated Lid: The lid opens and closes automatically with a hand gesture, minimizing contact.
  • Hoạt động yên tĩnh: The lid mechanism operates at approximately 40 dB, comparable to a library environment.
  • Kết cấu bền bỉ: Features an all-stainless steel exterior for longevity and easy cleaning.
  • Chỉ báo LED xanh lam: Provides visual feedback on lid status and closing countdown.
  • Bag Fixer: The inner box includes a bag fixer to secure trash bags in place.
  • Motor-Controlled System: EKO's unique spring and hinge system with magnetic reset ensures consistent performance and extended battery life.
EKO EK9287MT-20L Phantom Sensor Trash Can

Image: EKO EK9287MT-20L Phantom Sensor Trash Can, 20L capacity, silver finish.

Cài đặt

  1. Tháo hộp: Cẩn thận lấy thùng rác ra khỏi bao bì. Kiểm tra xem có hư hỏng gì không.
  2. Lắp đặt pin:
    • Hãy tìm ngăn chứa pin, thường nằm ở mặt dưới của nắp hoặc phía sau thiết bị.
    • Insert 6 AA alkaline batteries. Ensure correct polarity (+/-).
    • Quan trọng: Do not use manganese batteries or rechargeable batteries. Use batteries from the same manufacturer and avoid mixing old and new batteries to prevent operational abnormalities, leakage, or damage.
  3. Inner Box and Bag Fixer:
    • Lift the lid to access the inner box.
    • Place a 20L trash bag into the inner box.
    • Secure the trash bag using the integrated bag fixer to prevent it from slipping.
    • Return the inner box to the main unit.
  4. Vị trí: Place the trash can on a flat, stable surface. Ensure there is sufficient clearance above the sensor for proper operation. Avoid placing it in direct sunlight or near heat sources.

Hướng dẫn sử dụng

  1. Kích hoạt cảm biến:
    • Wave your hand approximately 10-15 cm (4-6 inches) above the sensor located on the lid. The sensor is designed to operate at palm height.
    • The lid will open automatically. A blue LED indicator will illuminate and show the time until it closes.
    • The lid will remain open for a few seconds, then close automatically.
  2. Manual Open/Close:
    • To open or close the lid manually, press the control panel button.
  3. Sensor On/Off Switch:
    • The unit is equipped with a sensor on/off switch. Locate this switch (usually on the back or underside of the lid) to disable or enable the sensor function as needed.

BẢO TRÌ

  • Vệ sinh bên ngoài:
    • Lau sạch bên ngoài bằng thép không gỉ bằng vải mềm,amp vải và chất tẩy rửa nhẹ, không mài mòn.
    • Avoid using harsh chemicals or abrasive pads, which can damage the finish.
    • Lau khô kỹ bằng khăn mềm sạch để tránh vết nước.
  • Cleaning the Inner Box:
    • The inner box is washable for hygiene. Remove it from the main unit and wash with soap and water.
    • Rinse thoroughly and ensure it is completely dry before placing it back into the trash can.
  • Thay thế pin:
    • When the lid mechanism becomes slow or unresponsive, it is time to replace the batteries.
    • Follow the battery installation steps in the "Setup" section. Always replace all 6 AA batteries at once with new alkaline batteries from the same manufacturer.

Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Lid does not open or close automatically.
  • Pin yếu hoặc hết.
  • Cảm biến bị tắc nghẽn hoặc bẩn.
  • Cảm biến bị tắt.
  • Trash can placed too close to an overhead obstruction.
  • Replace all 6 AA batteries with new alkaline batteries.
  • Lau sạch khu vực cảm biến bằng vải mềm, khô.
  • Ensure the sensor on/off switch is in the "ON" position.
  • Relocate the trash can to an area with sufficient overhead clearance.
Nắp mở bất ngờ.
  • Sensor is too sensitive or reacting to movement.
  • Direct sunlight or strong artificial light interfering with the sensor.
  • Ensure the trash can is not in a high-traffic area where people or pets frequently pass near the sensor.
  • Relocate the trash can away from direct light sources.
Nắp đóng quá nhanh hoặc quá chậm.
  • Pin yếu.
  • Replace all 6 AA batteries with new alkaline batteries.

Thông số kỹ thuật

Người mẫuEK9287MT-20L
Thương hiệuEKO
Dung tích20 lít
Màu sắcBạc
Cơ chế mởCảm biến chuyển động
Vật liệuAcrylonitrile Butadiene Styrene, Polypropylene
Nguồn điện6 pin kiềm AA (không kèm theo)
Trọng lượng sản phẩm4.5 Kilôgam
Kích thước (D x R x C)37.8cm x 25.1cm x 43.1cm
Dimensions of EKO EK9287MT-20L Phantom Sensor Trash Can

Image: Dimensions of the EKO EK9287MT-20L Phantom Sensor Trash Can, showing length (37.8cm), width (25.1cm), and height (43.1cm).

Bảo hành và Hỗ trợ

EKO products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official EKO webtrang web. Giữ lại biên lai mua hàng làm bằng chứng mua hàng.

For further assistance, you may contact EKO customer service through their official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.