Intel NUC 11 Pro NUC11TNHi7 Barebone System User Manual

1. Giới thiệu

The Intel NUC 11 Pro NUC11TNHi7 is an ultra-compact barebone system designed for a wide range of applications, from business and education to home computing. This kit provides a customizable board and chassis, allowing users to select and install their preferred memory, storage, and operating system. Its small footprint and robust performance make it an ideal solution for space-constrained environments requiring powerful computing capabilities.

2. Thông tin an toàn

Please read all safety instructions carefully before setting up or using your Intel NUC system. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• An toàn điện: Always disconnect the power adapter from the electrical outlet before performing any service or installation procedures. Use only the power adapter provided with your NUC or a compatible replacement.
• Thông gió: Ensure proper airflow around the NUC. Do not block ventilation openings. Operating the NUC in an enclosed space without adequate ventilation can lead to overheating.
• Xử lý các thành phần: When installing or removing internal components (RAM, SSD), always handle them by their edges to avoid touching sensitive connectors or components. Use an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
• Môi trường: Do not expose the NUC to water, moisture, or extreme temperatures. Operate the device within its specified temperature and humidity ranges.

3. Nội dung gói hàng

Verify that all items are present in your package. If any items are missing or damaged, contact your retailer.

• Intel NUC 11 Pro NUC11TNHi7 Barebone System
• Bộ đổi nguồn (AC/DC)
• Tài liệu (Hướng dẫn bắt đầu nhanh, Thông tin an toàn)

Image of the Intel NUC 11 Pro NUC11TNHi7 barebone system, showcasinVới thiết kế nhỏ gọn và các cổng phía trước.

4. Thiết lập

The Intel NUC 11 Pro NUC11TNHi7 is a barebone system, meaning you will need to install memory (RAM) and storage (SSD) before installing an operating system.

4.1. Lắp đặt bộ nhớ (RAM)

1. Unscrew the bottom cover of the NUC chassis and carefully remove it.
2. Locate the DDR4 SDRAM memory slots on the motherboard.
3. Align the notch on the DDR4 SODIMM module with the notch in the memory slot.
4. Insert the module firmly into the slot at a 45-degree angle, then push down until the retaining clips snap into place.
5. Repeat for additional memory modules if applicable. The NUC supports up to 64 GB of DDR4 SDRAM.

4.2. Installing Storage (SSD)

The NUC supports Serial ATA (SATA) storage devices. Depending on your specific NUC model, it may also support M.2 NVMe SSDs.

1. Identify the SATA data and power connectors on the motherboard and the corresponding bay for a 2.5-inch drive, or the M.2 slot for an M.2 SSD.
2. For 2.5-inch drives: Secure the drive in the designated bay and connect the SATA data and power cables.
3. For M.2 SSDs: Insert the M.2 SSD into the slot at an angle, then push down and secure it with the provided screw.

4.3. Lắp ráp lại khung máy

1. Carefully replace the bottom cover of the NUC chassis.
2. Secure the bottom cover with the screws removed earlier.

4.4. Kết nối thiết bị ngoại vi

1. Màn hình: Connect your monitor to the NUC using an HDMI cable.
2. Bàn phím và chuột: Connect your USB keyboard and mouse to any of the available USB ports.
3. Quyền lực: Connect the power adapter to the NUC's power input, then plug the power cord into an electrical outlet.

4.5. Installing Operating System

Since this is a barebone system, an operating system is not pre-installed. You will need to install your preferred operating system (e.g., Windows, Linux) from a bootable USB drive or network source. Refer to your operating system's installation guide for detailed steps.

5. Hướng dẫn vận hành

5.1. Bật / Tắt nguồn

• Bật nguồn: Nhấn nút nguồn nằm ở mặt trước của NUC. Đèn báo nguồn sẽ sáng lên.
• Tắt nguồn: To shut down the system, use the operating system's shutdown procedure. For a forced shutdown, press and hold the power button for approximately 4 seconds until the system powers off.

5.2. Kết nối mạng

• Wi-Fi: The NUC supports Wi-Fi connectivity. Once your operating system is installed, configure your wireless network settings to connect to an available Wi-Fi network.
• Bluetooth: The NUC includes Bluetooth for connecting wireless peripherals such as keyboards, mice, and headphones. Enable Bluetooth in your operating system settings and pair your devices.

6. Bảo trì

Bảo trì thường xuyên giúp đảm bảo độ bền và hiệu suất tối ưu cho Intel NUC của bạn.

• Vệ sinh: Use a soft, dry cloth to clean the exterior of the NUC. For dust accumulation in vents, use compressed air. Do not use liquid cleaners directly on the device.
• Cập nhật phần mềm: Regularly update your operating system, drivers, and BIOS/firmware to ensure system stability, security, and performance. Visit the Intel support website for the latest drivers and BIOS updates for your NUC model.
• Điều kiện môi trường: Operate the NUC in a clean, dry environment with adequate ventilation. Avoid extreme temperatures and direct sunlight.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your Intel NUC, refer to the following common troubleshooting steps.

• Không có điện:
  • Hãy đảm bảo bộ chuyển đổi nguồn được kết nối chắc chắn với cả NUC và ổ cắm điện đang hoạt động.
  • Kiểm tra ổ cắm điện có hoạt động không bằng cách cắm thiết bị khác.
  • Kiểm tra bộ đổi nguồn xem có hư hỏng nào không.
• Không hiển thị:
  • Confirm the monitor is powered on and correctly connected to the NUC via an HDMI cable.
  • Hãy thử cáp HDMI hoặc màn hình khác nếu có.
  • Hãy đảm bảo các mô-đun RAM được lắp đúng cách vào khe cắm.
• Thiết bị ngoại vi không được phát hiện:
  • Hãy thử kết nối thiết bị ngoại vi với một cổng USB khác.
  • Ensure the peripheral's drivers are installed in your operating system.
  • Test the peripheral on another computer to confirm it is functional.
• Hệ thống quá nhiệt:
  • Ensure the NUC's ventilation openings are not blocked.
  • Operate the NUC in a well-ventilated area.
  • Dùng khí nén để làm sạch bụi bẩn trong các lỗ thông hơi.

8. Thông số kỹ thuật

Below are the key technical specifications for the Intel NUC 11 Pro NUC11TNHi7 Barebone System:

9. Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the documentation included with your Intel NUC or visit the official Intel support website. Intel provides resources including drivers, software, and troubleshooting guides for their products.

Bạn thường có thể tìm thấy sự hỗ trợ bằng cách truy cập Intel's Official Support Page and searching for your specific NUC model (NUC11TNHi7).