Acogedor CPU Cooler Instruction Manual

Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of your Acogedor CPU Cooler. This cooler is specifically designed for AMD EPYC 7000 series processors utilizing the SP3 socket, suitable for 4U server and workstation environments. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Tính năng sản phẩm

• Khả năng tương thích: Specifically designed for H11 generation 4U servers and workstations equipped with AMD EPYC 7000 series processors.
• Hiệu suất đáng tin cậy: The radiator has undergone thorough testing to ensure quality and effective cooling performance.
• Kết cấu bền bỉ: Made with good quality materials, offering durability, large air volume, quiet operation, and efficient heat dissipation.
• Tản nhiệt hiệu quả: Effectively reduces the temperature generated by the CPU during operation, maintaining optimal performance.
• Low Noise, High Speed Fan: Features a fan with a revolving speed of 3800 RPM, providing efficient cooling with low noise levels for stable and reliable performance.

Image: Acogedor CPU Cooler, showcasing the heatsink and fan assembly.

Thông số kỹ thuật

Hình ảnh: Bên view of the CPU cooler illustrating its approximate dimensions.

Hướng dẫn cài đặt

Follow these steps carefully to install the Acogedor CPU Cooler onto your AMD EPYC 7000 series processor with an SP3 socket.

1. Prepare Radiator: Before installation, ensure the radiator is correctly aligned with the flowing direction of the system cooling air.
2. Adjust Mounting Screw: Adjust the position of the radiator mounting screw according to the required air flowing direction. Ensure it aligns with the relevant nut bracket so that the radiator can be installed on the stiffening frame.
3. Vật liệu giao diện nhiệt (TIM): Remove the thermal interface material (TIM) or thermal grease protective cover. The required amount of TIM has been pre-applied on the bottom of the heatsink. Check the pre-coated TIM for damage.
4. Vị trí tản nhiệt: Place the heatsink directly on top of the CPU. The four heatsink mounting studs or nut brackets should align with the slot reinforcement frame and be fixed on them. Ensure the radiator is correctly aligned with the flowing direction of the system cooling air. Note: When tightening the four radiator mounting screws, do not install the radiator cooling fan on the radiator body.
5. Tighten Screws (Initial): Use a screwdriver with a Star T20 drill bit and adjust the torsion setting of the screwdriver to 16.1 kgf-cm (14.0 lbf-in). Before opening the screwdriver, ensure the screwdriver bit is fully inserted into the hole of the heatsink mounting screw head. During the installation process, keep the heatsink mounting screws vertical.
6. Tighten Screws (Final): Tighten the two diagonal radiator mounting screws, rotating the screws 1 to 2 turns until they fit snugly. Do not tighten completely yet. Repeat this process for the remaining two diagonal heatsink mounting screws.
7. Secure Radiator: Confirm that the bottom of the radiator is correctly placed on the CPU and prevents the radiator from vibrating. Fully tighten all four heatsink mounting screws to complete the installation.
8. Install Cooling Fan and Bracket: Install the radiator cooling fan and bracket assembly to the radiator body, then tighten the single locking screw on the top of the fan bracket.
9. Connect Fan Connector: Connect the SNK-P0064AP4 cooling fan connector to the fan header marked "CPU" on the motherboard.

Hình ảnh: Trên cùng view of the CPU cooler showing the airflow direction indicator. Ensure this aligns with your system's cooling air path.

Hướng dẫn sử dụng

Once properly installed, the Acogedor CPU Cooler operates automatically. The 4-pin connector allows the motherboard to control the fan speed based on CPU temperature, ensuring optimal cooling and noise levels.

• The fan will adjust its speed up to 3800 RPM as needed to maintain CPU temperature.
• The noise level is rated at 38 Decibels, providing quiet operation under normal loads.
• Ensure your system's BIOS/UEFI settings are configured to allow for proper fan speed control (e.g., PWM mode enabled for the CPU fan header).

BẢO TRÌ

Việc bảo trì thường xuyên giúp đảm bảo tuổi thọ và hiệu suất tối ưu của bộ tản nhiệt CPU.

• Loại bỏ bụi: Periodically inspect the heatsink fins and fan blades for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the system is powered off before cleaning.
• Kiểm tra quạt: Check the fan for any obstructions or unusual noises. If the fan is making excessive noise or not spinning, refer to the troubleshooting section.
• Keo tản nhiệt: The thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures over time, consider reapplying new thermal paste. This requires carefully removing the cooler, cleaning old paste, and applying new paste.
• Kết nối cáp: Ensure the 4-pin fan connector remains securely attached to the motherboard header.

Xử lý sự cố

Bảo hành và Hỗ trợ

Acogedor products are designed for reliability and performance. For any technical support or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

While specific warranty details are not provided in this manual, standard consumer protection laws apply. Additionally, extended protection plans may be available for purchase from your retailer.

Để biết thêm thông tin, bạn có thể truy cập Acogedor Store on Amazon.