Giới thiệu
This manual provides essential information for the safe installation, operation, and maintenance of your Eglo Flexible LED Strip, Model 99716. Please read these instructions carefully before use and retain them for future reference.
Image: Eglo Flexible LED Strip installed behind a TV cabinet, providing ambient lighting.
Thông tin an toàn
- Chỉ sử dụng trong nhà: This LED strip is designed for indoor use. Do not expose it to moisture or outdoor elements. The product is not waterproof.
- Nguồn điện: Use only the provided power supply or a compatible 220V cable electric source. Ensure the voltage đáp ứng các yêu cầu của sản phẩm.
- Cắt: The LED strip can be cut only at designated marks (every 10 cm). Cutting at other points may damage the strip and void the warranty.
- Bề mặt lắp đặt: Ensure the installation surface is clean, dry, and smooth for proper adhesion.
- Tháo gỡ: The light source can be disassembled for separate function checks by qualified personnel. Do not attempt to modify the product beyond the specified cutting points.
- Trẻ em và vật nuôi: Để sản phẩm và các thành phần của sản phẩm xa tầm tay trẻ em và vật nuôi.
- Nhiệt: Do not cover the LED strip with materials that could trap heat, as this may cause overheating.
- Hư hại: If the LED strip or power cable is damaged, discontinue use immediately and contact customer support.
For detailed safety information, refer to the safety document (PDF) provided by the manufacturer, if available.
Nội dung gói
Xác minh rằng tất cả các thành phần đều có trong gói:
- Eglo Flexible LED Strip (Model 99716)
- Instruction Manual (Notice de montage)
- 1 CR2032 Battery (likely for a remote control, if included)
Cài đặt
1. Chuẩn bị bề mặt
Ensure the surface where the LED strip will be installed is clean, dry, and free of dust or grease. This ensures optimal adhesion of the self-adhesive strip.
2. Measuring and Cutting (Optional)
The LED strip has a total length of 800 cm (8 meters) and a width of 0.6 cm. If a shorter length is required, the strip can be cut at designated marks every 10 cm. Use sharp scissors for a clean cut. Do not cut at any other points. No additional connectors are included for rejoining cut sections.
Image: Diagram illustrating where the LED strip can be safely cut (every 10 cm).
3. Adhesion
The LED strip features an integrated self-adhesive backing for quick and easy attachment. Carefully peel off the protective film from the adhesive side and press the strip firmly onto the desired clean surface. Apply even pressure along the entire length.
Image: Diagram demonstrating the removal of the protective film from the adhesive backing of the LED strip.
4. Positioning and Flexibility
Thanks to its flexible, S-shaped design, the LED strip can be individually positioned by bending it. This allows for installation in corners, around irregular objects, or even to form letters and characters. It is ideal for illuminating areas such as TV cabinets, under cabinets, walls, beds, kitchens, or living rooms.
Image: Diagram illustrating the S-shape flexibility of the LED strip for custom installations.
5. Kết nối nguồn điện
Connect the LED strip to a standard 220V electrical outlet using the provided cable. Ensure all connections are secure before powering on.
Image: Diagram depicting the connection of the power cable to the LED strip.
Hướng dẫn sử dụng
Once properly installed and connected to power, the Eglo Flexible LED Strip will emit a pleasant warm white light. There are no complex operating controls for this model.
- Kích hoạt ánh sáng: The LED strip activates when connected to a power source. If a switch is integrated into the power cable or wall outlet, use it to turn the light on/off.
- Đặc điểm ánh sáng: The LEDs produce a warm white light with a color temperature of 3000 Kelvin. The total light output is 4800 lumens, with a power consumption of 43.2 watts.
BẢO TRÌ
- Vệ sinh: Disconnect the power before cleaning. Use a soft, dry cloth to gently wipe the surface of the LED strip. Do not use abrasive cleaners, solvents, or excessive moisture.
- Điều tra: Periodically inspect the LED strip and its power cable for any signs of damage or wear.
- Thay thế nguồn sáng: The LED light source is integrated and not user-replaceable. If the light source fails, the entire strip may need to be replaced.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Dải đèn LED không sáng. | No power supply, loose connection, faulty power outlet, damaged strip. | Check power connection. Ensure the power outlet is functional. Inspect the cable for damage. If the strip was cut, ensure it was done at the designated marks. |
| Part of the LED strip is not lighting up. | Damage to a section of the strip, improper cutting. | If the strip was cut, ensure the cut was clean and at the designated mark. If not, the section may be damaged. Contact customer support. |
| Keo dán dải đèn LED không bám chắc. | Surface not clean or dry, uneven pressure during application, unsuitable surface material. | Ensure the surface is thoroughly cleaned and dried before application. Apply firm, even pressure. For difficult surfaces, consider additional mounting clips (not included). |
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Số hiệu mẫu | 99716 |
| Thương hiệu | bản ngã |
| Màu sắc | Trắng |
| Vật liệu | Nhựa |
| Loại nguồn sáng | DẪN ĐẾN |
| Nguồn điện | Cáp điện |
| Tậptage | 220 vôn |
| Màu sáng | Trắng ấm |
| Nhiệt độ màu | 3000 độ Kelvin |
| Cái gì?tage | 43.2 Watts (as per feature bullets) |
| Thông lượng sáng | 4800 Lumen |
| Lớp năng lượng | F |
| Chiều dài | 800 cm (8 mét) |
| Chiều rộng | 0.6cm |
| Cân nặng | 320 gam |
| Sử dụng trong nhà/ngoài trời | Chỉ trong nhà |
| Mức độ chống thấm nước | Không thấm nước |
| Có thể cắt | Yes, every 10 cm |
| Pin (nếu có) | 1 CR2032 (included, likely for remote control) |
Bảo hành
This product comes with a manufacturer's warranty of 2 năm from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, accidents, or unauthorized modifications.
Ủng hộ
For further assistance, technical support, or warranty inquiries, please contact Eglo customer service. You can find contact information on the official Eglo webtrang web hoặc thông qua nhà bán lẻ của bạn.
Eglo Official Webđịa điểm: www.eglo.com
