LEDVANCE Linear LED Shelf Light 400mm

1. Giới thiệu

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Vui lòng đọc kỹ hướng dẫn sử dụng này trước khi lắp đặt và giữ lại để tham khảo trong tương lai.

2. Hướng dẫn an toàn

• An toàn điện: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Mục đích sử dụng: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Xếp hạng IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Nguồn sáng: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Xử lý: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Vệ sinh: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Nội dung gói hàng

Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu cài đặt:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Phụ kiện kết nối

4. Thông số kỹ thuật

Lưu ý: Thông số kỹ thuật có thể thay đổi mà không cần báo trước.

5. Thiết lập và Cài đặt

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Chuẩn bị khu vực lắp đặt: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Ngắt nguồn: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Đánh dấu điểm khoan: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Lỗ khoan: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. Đính kèm giá đỡ: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Kết nối điện: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Lắp đặt thiết bị cố định: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Khôi phục điện: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Hướng dẫn vận hành

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Hoạt động tự động: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Tự động tắt: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Vị trí cảm biến: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Bảo trì

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Vệ sinh: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the fixture.
• Điều tra: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Nguồn sáng: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Đèn không bật:
  • Kiểm tra xem nguồn điện đã được kết nối và cầu dao điện đã được bật chưa.
  • Hãy đảm bảo các mối nối dây điện chắc chắn.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Đèn sáng liên tục:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Light Flashes or Flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Đảm bảo voltage supply is stable and within the specified range (240V).

If these steps do not resolve the issue, contact customer support.

9. Bảo hành và Hỗ trợ

This LEDVANCE Linear LED Shelf Light comes with a Bảo hành 2 năm kể từ ngày mua, bao gồm các lỗi về vật liệu và tay nghề trong quá trình sử dụng bình thường.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.