BOOSTER M2

Hướng dẫn sử dụng súng massage chuyên nghiệp BOOSTER M2

Model: M2 | Brand: BOOSTER

1. Giới thiệu

Thank you for choosing the BOOSTER M2 Professional Massage Gun. This device is designed to provide deep tissue massage for muscle recovery, pain relief, and improved mobility. Its advanced features, including Smart-Hit technology and multiple massage modes, make it an essential tool for athletes and individuals seeking effective muscle therapy.

BOOSTER M2 Massage Gun with all six attachments and carrying case

The BOOSTER M2 Massage Gun, showcasing its sleek design, digital display, and the full set of interchangeable massage heads, along with its portable carrying case.

2. Thông tin an toàn quan trọng

Warning: Please read all safety instructions before using this product.

  • Consult a doctor before use if you have pre-existing medical conditions.
  • Do not use on areas with open wounds, inflammation, or severe bruising.
  • Keep the device away from water and do not immerse it in any liquid.
  • Không sử dụng thiết bị khi đang sạc.
  • Discontinue use immediately if you experience discomfort, pain, or any adverse reactions.
  • Để xa tầm tay trẻ em và vật nuôi.
  • Chỉ sử dụng bộ sạc và phụ kiện được cung cấp.
  • Không cố gắng tự tháo rời hoặc sửa chữa thiết bị.

3. Nội dung gói hàng

Đảm bảo tất cả các mục đều có trong gói hàng của bạn:

  • BOOSTER M2 Massage Gun
  • 6 đầu massage có thể hoán đổi cho nhau
  • Cáp sạc Type-C
  • Hộp đựng di động
  • Hướng dẫn sử dụng (tài liệu này)
BOOSTER M2 Massage Gun and accessories neatly packed in its portable carrying case

The BOOSTER M2 Massage Gun and its accessories are designed for convenient storage and portability within the included case.

4. Thiết lập

4.1 Sạc ban đầu

Before first use, fully charge the massage gun. The device features a 12V lithium battery with a 2500mAh capacity.

  1. Locate the Type-C charging port at the bottom of the handle.
  2. Connect the provided Type-C charging cable to the device and a compatible 5V-2A USB power adapter (not included).
  3. The digital display will show the battery level. A full charge typically takes approximately 2 hours.
  4. Ngắt kết nối bộ sạc khi pin đã được sạc đầy.
Close-up of the BOOSTER M2 Massage Gun's base showing the Type-C charging port, power switch, and battery specifications

The base of the BOOSTER M2, highlighting the Type-C charging port and the ON/OFF switch. The battery is a 12V 2500mAh lithium type.

4.2 Gắn đầu massage

The BOOSTER M2 comes with 6 different massage heads. To attach a head:

  1. Đảm bảo thiết bị đã tắt.
  2. Gently push the desired massage head into the front opening of the gun until it is securely seated.
  3. Để tháo ra, hãy nhẹ nhàng kéo đầu massage thẳng ra ngoài.

5. Hướng dẫn vận hành

5.1 Bật / Tắt nguồn

  1. To turn on the device, slide the power switch at the bottom of the handle to the 'ON' position. The digital display will illuminate.
  2. Để tắt thiết bị, hãy gạt công tắc nguồn sang vị trí 'TẮT'.

5.2 Mode Selection and Speed Adjustment

The BOOSTER M2 features a touch screen interface for easy control.

BOOSTER M2 Massage Gun display showing Smart-Hit technology and various modes: Standard, Fade-out, Crescendo, Wave

The control panel of the BOOSTER M2, illustrating the Smart-Hit technology and the three automatic modes: Fade-out, Crescendo, and Wave.

  • Standard Mode (Smart-Hit Technology): This mode offers 4 standard speeds (900-3200rpm) and an AI mode. The Smart-Hit technology allows the device to adjust massage intensity based on the pressure you apply to the muscles, providing a seamless switching of speed and intensity.
  • Chế độ tự động: The M2 also features three specific automatic modes:
    • Fade-out Vibration: Decrease of vibration intensity, suitable for muscle relaxation after exercise.
    • Crescendo Vibration: Tăngasing of vibration intensity, suitable for muscle activation before exercise.
    • Wave Vibration: Fluctuation of vibration, suitable for various scenarios of relaxation.
  • Chế độ chuyển đổi: Long press the power button on the touch screen to cycle through the available modes.
  • Adjusting Speed/Intensity: In Standard mode, use the '+' and '-' buttons on the touch screen to increase or decrease the massage speed.

5.3 Ứng dụng

Apply the massage gun to the desired muscle group. Move the device slowly and gently over the muscles. Do not apply excessive pressure, especially on bony areas. For optimal results, use for 1-2 minutes per muscle group.

6. Massage Heads and Their Use

The BOOSTER M2 comes with six specialized massage heads, each designed for different muscle groups and massage needs.

Diagram illustrating six different massage heads: Air Compression Soft Head, Small Round Head, Bullet Head, Flat Head, and Spinal Head, with descriptions of their uses.

Một quaview of the six distinct massage heads included with the BOOSTER M2, detailing their shapes and recommended applications for various muscle groups and massage techniques.

  • Air Compression Soft Head: Used for sensitive muscle groups and soft tissue relaxation.
  • Small Round Head: Suitable for full body muscle massage and general relaxation.
  • Đầu đạn: Used for trigger point massage. Do not apply for longer than 15 seconds on a single point.
  • Đầu phẳng: Suitable for full body muscle massage and relaxation, providing a broader contact area.
  • Spinal Head (U-shaped): Used for spinal massage, carefully applied around the spine.
  • Large Round Head: Similar to the small round head, suitable for larger muscle groups and general relaxation.

7. Bảo trì

7.1 Vệ sinh

Để làm sạch thiết bị:

  1. Ensure the massage gun is turned off and unplugged.
  2. Lau bề mặt của thiết bị với hơi damp, soft cloth. Do not use abrasive cleaners or immerse in water.
  3. Làm sạch đầu massage bằng dung dịch xà phòng nhẹ và nước, sau đó rửa sạch và lau khô kỹ trước khi lắp lại.

7.2 Lưu trữ

Store the device in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Keep out of reach of children.

KHAI THÁC. Xử lý sự cố

  • Thiết bị không bật: Ensure the battery is charged. Check the power switch is in the 'ON' position.
  • Cường độ massage yếu: Ensure the correct mode is selected. In Standard mode, increase the speed setting. Apply slightly more pressure to activate Smart-Hit technology.
  • Tiếng ồn bất thường: Ensure the massage head is securely attached. If the noise persists, discontinue use and contact customer support.
  • Pin không giữ được điện: Ensure you are using the correct Type-C charging cable and a 5V-2A power adapter. If the issue persists after following charging instructions, the battery may require service.

9. Thông số kỹ thuật

Diagram showing the dimensions of the BOOSTER M2 Massage Gun and detailed specifications for the charger, battery, and massage gun itself.

Detailed product dimensions and technical specifications for the charger, battery, and massage gun performance.

Tính năngChi tiết
Số hiệu mẫuM2
Kích thước sản phẩm17 x 6 x 25cm
Trọng lượng sản phẩm1.0kg
Nguồn điệnPin chạy bằng
Loại pin12V Lithium Battery, 2500mAh
Giao diện sạcLoại C
Rated Charger Output5V-2A
Dải tần số900-3200 vòng/phút
Đột quỵ Amplòng dạ10 mm (effective massage depth 80mm)
Mức độ tiếng ồnDưới 50 dB
Sử dụng choToàn thân
Bar chart showing distribution of massage gun amplitude and a diagram illustrating effective massage depth into muscle tissue.

This diagram illustrates the effective massage depth of the BOOSTER M2, highlighting its ability to penetrate muscle tissue for deep relief.

10. Bảo hành và Hỗ trợ

The BOOSTER M2 Professional Massage Gun comes with a 3-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or any questions regarding your BOOSTER M2 Massage Gun, please visit the official BOOSTER webtrang web hoặc liên hệ với nhà bán lẻ của bạn.

Chính thức Webđịa điểm: www.boosterjet.net

© 2024 BOOSTER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.