Hauck Unicorn Doll Stroller & Care Set Instruction Manual

Thông tin an toàn quan trọng

Please read these instructions carefully before assembly and use. Keep this manual for future reference.

• This product is a toy and is intended for dolls only. It is not suitable for real infants or pets.
• Khuyên dùng cho trẻ từ 3 tuổi trở lên.
• Nên có sự giám sát của người lớn trong quá trình lắp ráp và chơi.
• Ensure all parts are securely fastened before allowing a child to play with the set.
• Do not allow children to climb on or stand in the stroller, swing, or high chair.
• Giữ vật liệu đóng gói tránh xa tầm tay trẻ em để tránh bị ngạt thở.

Nội dung gói

Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu lắp ráp:

• Doll Stroller (1)
• Doll Swing / High Chair Combo (1)
• Hướng dẫn sử dụng (1)

Thiết lập và lắp ráp

1. Doll Stroller Assembly

The doll stroller is designed for easy setup. Unfold the stroller frame until it locks into place. Attach the canopy if it is not pre-attached. Ensure the wheels are securely in position.

Image: Fully assembled Hauck Unicorn Doll Stroller, featuring a pink and grey design with a unicorn graphic on the seat and a patterned canopy.

Hình ảnh: Cận cảnh view of the doll stroller's seat with a unicorn graphic, showing the harness belt and the patterned canopy.

Hình ảnh: View of the underside of the doll stroller, highlighting the wheels, storage basket, and the steel tube frame with plastic connector points.

2. Doll Swing / High Chair Combo Assembly

The 3-in-1 doll play set includes a swing that converts into a high chair and can be used as a car seat/carrier. The easy click connect system allows for simple transitions.

1. Swing Setup: Assemble the swing frame by connecting the steel tubes as shown in the diagram. Ensure all connections click securely into place. Place the doll seat into the swing frame.
2. High Chair Conversion: To convert the car seat/carrier into a high chair, snap it into the top two connectors of the high chair stand. Ensure it is firmly seated.

Image: The doll high chair, featuring a pink seat with a unicorn graphic, a feeding tray, and a grey steel frame.

Image: The doll swing, showing the pink doll seat with a unicorn graphic suspended within a grey steel swing frame.

Image: The doll car seat/carrier, a pink seat with a unicorn graphic and a carrying handle, designed for portability.

Hướng dẫn sử dụng

Using the Doll Stroller

• Place your doll in the stroller seat.
• Secure the doll using the adjustable harness belt.
• Adjust the canopy as needed for shade.
• Use the storage basket located underneath the seat for doll accessories.
• To fold the stroller for storage or travel, follow the folding mechanism instructions (typically a latch or button on the frame).

Using the Doll Swing

• Ensure the swing frame is stable on a flat surface.
• Place your doll securely in the swing seat.
• Gently push the swing to initiate motion.

Using the Doll High Chair

• Ensure the high chair stand is fully extended and stable.
• Snap the doll car seat/carrier into the high chair stand's top connectors.
• Place your doll in the high chair seat and use the tray for play feeding.

Using the Doll Car Seat / Carrier

• Place your doll in the carrier seat.
• Use the integrated handle to carry the doll.
• This component can also be used independently for doll transport.

BẢO TRÌ

• Vệ sinh: Lau sạch các bộ phận bằng nhựa và kim loại bằng dung dịch chuyên dụng.amp cloth and mild soap. Do not use abrasive cleaners. Fabric parts can be spot cleaned.
• Kho: Store the set in a clean, dry place away from direct sunlight when not in use. The doll stroller is easy to fold for compact storage.
• Điều tra: Periodically check all screws, bolts, and connectors to ensure they are tight and secure. Replace any damaged parts immediately.

Xử lý sự cố

Thông số kỹ thuật

• Số hiệu mẫu: Ngày 93906
• Thương hiệu: Hauck
• Độ tuổi khuyến nghị: 36 months to 1200 months (3 to 100 years)
• Vật liệu: Plastic, Steel Tube Frame
• Item Dimensions (Stroller): Khoảng 13.39 x 7.48 x 26.77 inch (L x W x H)
• Yêu cầu lắp ráp: No (for initial setup, minor assembly may be needed for swing/high chair frame)
• Các thành phần bao gồm: Doll Stroller, Swing/High Chair Combo

Bảo hành và Hỗ trợ

Để biết thông tin về bảo hành hoặc hỗ trợ khách hàng, vui lòng tham khảo trang web chính thức của nhà sản xuất. webtrang web hoặc liên hệ với bộ phận chăm sóc khách hàng của họ. Giữ lại hóa đơn mua hàng để làm bằng chứng mua hàng.

Nhà sản xuất: Hauck

Webđịa điểm: Visit the Hauck Store on Amazon