MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System User Manual

Giới thiệu

This manual provides detailed instructions for the setup, operation, and maintenance of your MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System. This system features a 5 GHz 1/2U dual-channel digital receiver and two ISM 5 GHz digital handheld wireless microphones, designed for reliable and high-quality audio transmission.

Có gì trong hộp

Khi mở hộp, vui lòng kiểm tra xem có đầy đủ tất cả các thành phần sau đây không:

• 1 x ACT-5802 Dual-Channel Digital Receiver
• 2 x ACT-58H2 Handheld Digital Wireless Microphones
• 1 x Bộ đổi nguồn cho máy thu
• 2 x Ăng-ten
• 1 x Cáp âm thanh
• 1 x Hướng dẫn sử dụng

Note: If any items are missing or damaged, please contact your dealer immediately.

Sản phẩm trênview

The MIPRO ACT-5802/ACT-58H2 system provides a robust wireless audio solution. Below is an image of the complete system.

Hình 1: MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System. This image displays the ACT-5802 dual-channel receiver unit and two ACT-58H2 handheld microphones, illustrating the primary components of the wireless audio system.

Hướng dẫn thiết lập

1. Receiver Setup (ACT-5802)

1. Vị trí: Position the receiver on a stable, flat surface, away from potential sources of interference such as Wi-Fi routers, microwave ovens, or other 5 GHz devices. Ensure adequate ventilation.
2. Kết nối ăng ten: Connect the two supplied antennas to the ANTENNA A and ANTENNA B connectors on the rear panel of the receiver. Ensure they are securely tightened.
3. Kết nối nguồn điện: Connect the power adapter to the DC IN jack on the rear panel of the receiver, then plug the adapter into an appropriate AC power outlet.
4. Kết nối đầu ra âm thanh: Kết nối đầu ra âm thanh của bộ thu (XLR hoặc giắc cắm 1/4") với đầu vào của bàn trộn âm thanh. amplifier, or audio recording device using the supplied audio cable.

2. Handheld Microphone Setup (ACT-58H2)

1. Lắp đặt pin: Unscrew the lower part of the microphone body to reveal the battery compartment. Insert two fresh AA batteries, observing the correct polarity (+/-) as indicated inside the compartment. Screw the lower part back on securely.
2. Bật nguồn: Press and hold the power button on the microphone until the display illuminates.
3. Pairing (ACT Sync):
   • On the receiver, select the desired channel (e.g., Channel 1 or Channel 2) using the control buttons.
   • Press the "ACT" button on the receiver. The ACT indicator will flash.
   • Align the microphone's IR window with the receiver's IR window (usually located on the front panel) within 30 cm (1 foot).
   • The microphone will automatically sync with the receiver. Once synced, the receiver's ACT indicator will stop flashing, and the microphone's display will show the matched channel.

Hướng dẫn sử dụng

1. Bật / Tắt nguồn

• Người nhận: Press the power button on the front panel. The OLED display will illuminate.
• Micrô: Press and hold the power button until the display illuminates (on) or turns off (off).

2. Channel Selection and Adjustment

• The ACT-5802 receiver allows for automatic frequency scanning to find clear channels. Refer to the receiver's display and menu buttons for navigation.
• Once a clear channel is selected on the receiver, use the ACT Sync function (as described in Setup) to pair the microphone to the new channel.

3. Điều khiển âm lượng

• Mức đầu ra của bộ thu: Adjust the volume knob on the front panel of the ACT-5802 receiver to control the audio output level sent to your mixer or ampchất lót.
• Độ lợi micrô: Some microphones may have internal gain adjustments. Consult the microphone's specific instructions if needed. Generally, start with a moderate gain setting.

4. Hiển thị thông tin

The OLED display on both the receiver and microphones provides critical information such as channel number, frequency, battery status, and RF/AF signal strength. Monitor these displays during operation for optimal performance.

BẢO TRÌ

1. Vệ sinh

• Use a soft, dry cloth to clean the exterior surfaces of the receiver and microphones.
• Không sử dụng chất tẩy rửa dạng lỏng, dung môi hoặc vật liệu mài mòn, vì chúng có thể làm hỏng lớp sơn hoặc các bộ phận bên trong.
• For microphone grilles, gently wipe with a slightly damp vải và đảm bảo nó khô hoàn toàn trước khi sử dụng.

2. Chăm sóc pin

• Always remove batteries from the microphones if they will not be used for an extended period to prevent leakage and damage.
• Replace batteries promptly when the low battery indicator appears on the microphone's display.
• Hãy sử dụng pin AA kiềm hoặc pin sạc chất lượng cao.

3. Lưu trữ

• Bảo quản hệ thống ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp, nhiệt độ quá cao hoặc quá thấp và độ ẩm cao.
• Keep the original packaging for safe transport and storage.

Xử lý sự cố

Thông số kỹ thuật

Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the warranty card included with your product or visit the official MIPRO webtrang web. Giữ lại biên lai mua hàng làm bằng chứng mua hàng cho bất kỳ khiếu nại bảo hành nào.

For further assistance, contact your authorized MIPRO dealer or distributor.