MAYTRONICS DOLPHIN S200 IG

Hướng dẫn sử dụng máy vệ sinh hồ bơi tự động Maytronics Dolphin S200

Model: DOLPHIN S200 IG

Giới thiệu

This manual provides essential information for the safe and efficient operation and maintenance of your Maytronics Dolphin S200 Robotic Pool Cleaner. Please read it thoroughly before first use.

Maytronics Dolphin S200 Robotic Pool Cleaner

Image: The Maytronics Dolphin S200 Robotic Pool Cleaner, a compact and efficient device designed for automated pool cleaning.

Cài đặt

Setting up your Dolphin S200 is a straightforward process, as no assembly is required.

  1. Kết nối nguồn điện: Plug the Dolphin S200 into a suitable power source. Ensure the power outlet is protected and appropriate for outdoor use.
  2. Vị trí trong bể bơi: Carefully place the cleaner into the pool. Allow it to sink to the bottom.
  3. Initiate Cleaning: The cleaner is designed for automatic operation once powered on and submerged.

The unit operates on 24 Volts and is designed for ease of use with a touch control method.

Hướng dẫn sử dụng

The Dolphin S200 is designed for automated cleaning cycles. Once initiated, it will navigate and clean your pool surfaces efficiently.

  • Hoạt động tự động: The robotic cleaner will automatically clean the pool floor and walls.
  • Chu kỳ làm sạch: Allow the cleaner to complete its full cleaning cycle for optimal results.
  • Xóa bỏ: Once the cycle is complete, carefully remove the cleaner from the pool using its handle.

BẢO TRÌ

Regular maintenance ensures the longevity and optimal performance of your Dolphin S200.

  1. Làm sạch bộ lọc: After each cleaning cycle, remove the filter from the top of the unit and empty any collected debris.
  2. Rửa sạch: Rinse the filter thoroughly with a hose to remove fine particles before the next use.
  3. Kho: Store the device in a cool, dry place when not in use to protect its components.
  4. Kiểm tra trước khi sử dụng: Before and after each use, visually inspect the cleaner for any signs of damage or wear.

Xử lý sự cố

Phần này cung cấp hướng dẫn về những vấn đề thường gặp mà bạn có thể gặp phải.

Vấn đềNguyên nhân có thểGiải pháp
Cleaner not movingPower supply issue, tangled cable, debris in brushes.Check power connection, untangle cable, clean brushes.
Hiệu suất làm sạch kémFull or dirty filter, worn brushes.Clean or replace filter, inspect and replace brushes if necessary.
Chất tẩy rửa nổiAir trapped inside, insufficient water saturation.Submerge cleaner fully and gently shake to release trapped air.

Thông số kỹ thuật

Tính năngChi tiết
Thương hiệuMAYTRONICS
Tên mẫuDOLPHIN S200 IG
Số hiệu mẫu sản phẩmDOLPHIN S200 IG
ASINB08C1B23FD
Mã số UPC724131497941
Yêu cầu lắp rápKHÔNG
Phương pháp kiểm soátChạm
Tậptage24 vôn
Hiệu quảTiết kiệm năng lượng
Loại cài đặtNgười máy
Vật liệuABS (Acrylonitrile Butadiene Styrene), Plastic
Nguồn điệnPin chạy bằng
Tính năng đặc biệtNhẹ
Trọng lượng sản phẩm17 pound
Kích thước gói hàng22 x 18 x 14 inch

Thông tin bảo hành

The Maytronics Dolphin S200 Robotic Pool Cleaner comes with a Bảo hành có giới hạn. For specific terms and conditions, please refer to the warranty card included with your product or contact Maytronics customer service.

Hỗ trợ khách hàng

For further assistance, technical support, or spare parts, please contact Maytronics customer service. Refer to the product packaging or the official Maytronics webtrang web để biết chi tiết liên hệ.

Bạn cũng có thể ghé thăm trang sản phẩm trên Amazon Để biết thêm thông tin và hỗ trợ khách hàng, vui lòng liên hệ với chúng tôi.views.

© 2023 Maytronics. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.