KENT Supreme RO Water Purifier

1. Sản phẩm hếtview

The KENT Supreme RO Water Purifier is designed to provide pure and safe drinking water using advanced purification technologies. It combines Reverse Osmosis (RO), Ultra Filtration (UF), and a UV LED in the storage tank, along with a TDS Control System, to ensure comprehensive water purification.

Hình 1: Mặt trước view of the KENT Supreme RO Water Purifier.

This purifier is suitable for various water sources, including municipal tap water, borewell water, and tanker water, effectively removing dissolved impurities such as arsenic, mercury, lead, hardness, dissolved salts, rust, pesticides, and fluorides.

Hình 2: Minh họa hệ thống đa kênhtagquy trình thanh lọc điện tử.

The integrated TDS Control System allows for adjustment of the Total Dissolved Solids level, ensuring essential natural minerals are retained in the purified water, enhancing both health benefits and taste. The UV LED in the storage tank maintains the purity of stored water for an extended period.

Figure 3: Purified water retaining essential minerals.

2. Hướng dẫn an toàn

• Đọc kỹ tất cả các hướng dẫn trước khi vận hành thiết bị.
• Ensure the power supply matches the specifications mentioned on the rating label.
• Do not install the purifier in direct sunlight or near heat sources.
• Để thiết bị tránh xa trẻ em và vật nuôi.
• Do not attempt to repair or modify the appliance yourself. Contact authorized service personnel.
• Always use genuine KENT spare parts for replacement.

3. Cài đặt và thiết lập

Professional installation is recommended for the KENT Supreme RO Water Purifier. A complimentary installation service is typically included with your purchase. Please contact KENT customer service to schedule your installation.

3.1 Kiểm tra trước khi cài đặt

• Áp suất nước: Ensure the raw water pressure is within the recommended range (0.3 - 4.0 kg/cm²).
• Nguồn nước: Confirm a suitable water inlet connection is available.
• Nguồn điện: A standard single-phase 100-240V AC, 50/60 Hz electrical outlet is required.
• Vị trí: Choose a wall-mounted location that is clean, dry, and away from direct sunlight or extreme temperatures.

3.2 Installation Steps (Performed by Technician)

1. Mount the purifier securely on a wall using the provided mounting template and screws.
2. Kết nối đường ống dẫn nước thô với máy lọc.
3. Connect the reject water line to a drain.
4. Connect the power adapter and plug it into the electrical outlet.
5. Mở van cấp nước thô cho máy lọc.
6. Allow the storage tank to fill completely and then drain the first tank of purified water to flush the system. Repeat this process 2-3 times.
7. Adjust the TDS controller to the desired level (if applicable).

4. Hướng dẫn vận hành

4.1 Khởi động ban đầu

After professional installation and initial flushing, the purifier is ready for use. The purifier will automatically start purifying water when the water level in the storage tank drops below a certain level and stop when the tank is full.

4.2 Dispensing Purified Water

To dispense purified water, simply turn the faucet lever located at the bottom front of the purifier. Close the lever to stop the water flow.

4.3 Hiểu về các chỉ số

Your KENT Supreme purifier may feature LED indicators for power, purification status, tank full, and filter change alerts. Refer to the specific model's front panel for detailed indicator meanings.

5. Bảo trì

Regular maintenance is crucial for the optimal performance and longevity of your KENT Supreme RO Water Purifier. Always unplug the appliance before performing any maintenance.

5.1 Thay thế bộ lọc

Filters and membranes have a limited lifespan and require periodic replacement. The frequency depends on the quality of raw water and usage. It is recommended to replace filters annually or as indicated by the filter change alarm. Always use genuine KENT spare parts.

5.2 Vệ sinh bể chứa

The storage tank should be cleaned periodically, especially during filter replacement. This should be performed by a trained service technician.

5.3 Vệ sinh bên ngoài

Lau sạch bên ngoài máy lọc không khí bằng khăn mềm.amp vải. Không sử dụng chất tẩy rửa có tính mài mòn hoặc dung môi.

Figure 4: Scan the QR code or visit kent.co.in/customerapp to verify genuine KENT service and spares.

KHAI THÁC. Xử lý sự cố

If the problem persists after attempting these solutions, please contact KENT customer support.

7. Thông số kỹ thuật

8. Bảo hành và Hỗ trợ

The KENT Supreme RO Water Purifier comes with a 1-year free warranty from the date of purchase. This includes complimentary installation, routine health check calls, and unlimited repair visits for one year.

For service requests, genuine spares, or any queries, you can easily access KENT's service network through:

• WhatsApp
• Ứng dụng di động
• Số điện thoại miễn phí
• E-mail

Please refer to the warranty card and device manual for detailed disclaimers, terms, and conditions.

9. Video sản phẩm