1. Giới thiệu
Thank you for choosing the BEABA by Shnuggle Baby Bath. This manual provides essential information for the safe and effective use of your baby bath. Designed for comfort and safety, this bath features an integrated bump support and a soft foam backrest, making bath time enjoyable for infants from 0 to 12 months.
Đằng trước view of the BEABA by Shnuggle Baby Bath in pink, showing the integrated bump support and soft backrest.
2. Thông tin an toàn quan trọng
Please read and understand all safety warnings before using the product. Failure to follow these instructions could result in serious injury or death.
- WARNING: Never leave your child unattended in the bath, even for a moment. Drowning can occur quickly and in very shallow water.
- Always keep your child within arm's reach.
- Before placing your child in the bath, always check the water temperature to ensure it is safe and comfortable (approximately 37°C / 98.6°F).
- Ensure the bath is placed on a stable, flat, and non-slip surface.
- Do not overfill the bath. Always adhere to the maximum fill line indicated inside the bath.
- Keep all bath products (shampoo, soap, etc.) out of reach of your child.
- Inspect the bath for any damage or wear before each use. Discontinue use if any damage is found.
- This product is intended for bathing infants only. Do not use for any other purpose.
3. Nội dung gói hàng
Your BEABA by Shnuggle Baby Bath package should contain the following:
- 1 x BEABA by Shnuggle Baby Bath with integrated bump support and soft foam backrest.
- 1 x Drain plug (pre-installed).
4. Thiết lập
Setting up your baby bath is simple:
- Chọn vị trí: Select a stable, flat, and safe surface for the bath. This can be inside a larger adult bathtub, on a sturdy bathroom floor, or in a large sink.
- Thanh tra: Before first use, and before each subsequent use, inspect the bath for any signs of damage or manufacturing defects.
- Ensure Drain Plug is Secure: Verify that the drain plug at the bottom of the bath is securely closed before filling with water.
The BEABA by Shnuggle Baby Bath can be placed on a stable surface for use.
5. Hướng dẫn vận hành
Follow these steps for a safe and comfortable bath time:
- Đổ đầy nước: Begin by filling the bath with water. Always test the water temperature with your elbow or a bath thermometer to ensure it is between 36-38°C (97-100°F). Do not exceed the maximum fill line indicated inside the bath.
- Đặt em bé của bạn: Gently place your baby into the bath, ensuring their bottom rests against the integrated bump support and their back is comfortably supported by the soft foam backrest. This design helps prevent your baby from sliding down.
- Bathe Your Baby: While keeping one hand on your baby at all times, use your other hand to wash your baby. The upright position allows for easy access and interaction.
- Remove Your Baby: Once bath time is complete, carefully lift your baby out of the bath. Wrap them immediately in a towel to keep them warm.
- Thoát nước: Once your baby is safely out of the bath, open the drain plug at the bottom of the bath to empty the water.
A baby comfortably seated in the BEABA by Shnuggle Baby Bath, smiling during bath time.
Diagram illustrating the recommended water fill line for safe use.
6. Vệ sinh và bảo trì
Proper cleaning and maintenance will ensure the longevity and hygiene of your baby bath:
- Sau mỗi lần sử dụng: Empty the bath completely. Rinse thoroughly with clean water to remove any soap residue.
- Vệ sinh: Wipe the bath clean with a soft cloth and mild soap or a non-abrasive cleaner. Avoid harsh chemicals or abrasive sponges, as these can damage the surface.
- Sấy khô: Allow the bath to air dry completely after cleaning to prevent mold or mildew growth.
- Kho: Store the bath in a clean, dry place away from direct sunlight and extreme temperatures.
KHAI THÁC. Xử lý sự cố
Sau đây là giải pháp cho những vấn đề phổ biến mà bạn có thể gặp phải:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Water is not draining properly. | Drain plug is blocked or not fully open. | Ensure the drain plug is fully open and clear of any debris. |
| Baby slides down in the bath. | Baby not positioned correctly against the bump support; bath overfilled. | Ensure baby's bottom is firmly against the bump support. Do not overfill the bath beyond the maximum fill line. |
| Bath feels unstable. | Bath placed on an uneven or slippery surface. | Always place the bath on a stable, flat, and non-slip surface. |
8. Thông số kỹ thuật sản phẩm
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Số hiệu mẫu | SHNUGGLETUBS |
| Thương hiệu | Béaba |
| Độ tuổi được đề xuất | 0 - 12 tháng |
| Trọng lượng tối đa được khuyến nghị | 21 pound (khoảng 9.5 kg) |
| Màu sắc | Hồng |
| Kích thước (Bao bì) | 60.32 x 38.1 x 38.1 cm (23.75 x 15 x 15 inch) |
| Trọng lượng sản phẩm | 1.25 kg (2.75 pound) |
| Yêu cầu pin | KHÔNG |
9. Bảo hành và Hỗ trợ
For warranty information, product support, or to inquire about replacement parts, please refer to the official Béaba webhoặc liên hệ trực tiếp với bộ phận chăm sóc khách hàng của họ. Hãy giữ lại hóa đơn mua hàng để được bảo hành.
Nhà sản xuất: BÉA BÉA
Webđịa điểm: www.beaba.com (Vui lòng lưu ý: Liên kết này chỉ mang tính chất tham khảo chung và có thể không chính xác cho khu vực của bạn.)