1. Giới thiệu
The Sovol Solar Turntable is designed to provide a 360° rotating platform for the uniform curing of UV resin 3D prints. This stand utilizes solar or strong artificial light sources (like UV lamps) to power its rotation, ensuring that all surfaces of your 3D printed models receive consistent exposure during the curing process. It is also suitable for displaying small items such as jewelry, mobile phones, watches, and crystal objects.
2. Thông tin an toàn
Please read all safety instructions before using the product. Keep this manual for future reference.
- Không để thiết bị tiếp xúc với nhiệt độ quá cao hoặc quá thấp (trên 80°C hoặc dưới -20°C).
- Avoid direct contact with water or other liquids.
- Không cố tháo rời hoặc sửa đổi thiết bị.
- Ensure the turntable is placed on a stable, flat surface during operation.
- This device is powered by light; it does not require or use batteries for its primary function.
- When using for UV resin curing, always follow safety guidelines for handling UV resin and operating UV light sources. Wear appropriate personal protective equipment (PPE) such as gloves and eye protection.
Image: Product packaging showing safety warnings and manufacturer details. Always adhere to all listed safety precautions.
3. Nội dung gói hàng
Gói hàng bao gồm các mặt hàng sau:
- 1 x Sovol Solar Turntable 360° Rotating Stand
4. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Chất liệu sản phẩm | ABS |
| Màu sắc | Bạc |
| Nhiệt độ chịu nhiệt | 80 °C |
| Cold Resistance Temperature | -20 °C |
| Solar Battery Voltage | 1.2 vôn |
| Tải trọng tối đa | 300g - 500g (0.66 - 1.1 lbs) |
| Tốc độ quay tối đa | 4.5 circles/minute |
| Kích thước (D x R x C) | Xấp xỉ 10 x 10 x 4.5 cm (3.94 x 3.94 x 1.77 inch) |
| Đường kính khay | Xấp xỉ 9 cm (3.5 inch) |
| Trọng lượng sản phẩm | 110 gam |
| Loại nguồn điện | Solar (Light-powered) |
| Pin cần thiết | KHÔNG |
| Số hiệu mẫu | XZBDS |
Image: Dimensional diagram of the Sovol Solar Turntable.
5. Thiết lập
- Mở hộp bàn xoay: Carefully remove the solar turntable from its packaging.
- Vị trí: Place the turntable on a flat, stable surface. Ensure there is sufficient space around it for the items you intend to display or cure.
- Nguồn sáng: Position the turntable in an area with adequate light. For UV resin curing, a dedicated UV light source is required. For general display, natural sunlight or strong fluorescent lighting will suffice. The turntable's solar panels (visible on the base) need to be exposed to light to initiate rotation.
- Initial Rotation: If the turntable does not start rotating immediately, gently nudge it to overcome initial inertia. Stronger light will result in faster and more consistent rotation.
Image: The solar turntable positioned next to a UV light source, ready for operation.
Image: Detail of the solar panels on the turntable base, which power the rotation.
6. Hướng dẫn vận hành
- Đặt vật phẩm: Carefully place the item you wish to rotate (e.g., a 3D print for curing, or a display item) onto the center of the turntable's transparent tray. Ensure the weight does not exceed the maximum load capacity of 500g (1.1 lbs).
- Kích hoạt Xoay: Expose the solar panels on the turntable's base to a strong light source. For UV resin curing, this will be your UV curing lamp. For display purposes, natural sunlight or bright indoor lighting is sufficient. The turntable will begin to rotate automatically.
- Monitor Curing (for 3D prints): When curing UV resin prints, ensure the UV light source is positioned to evenly illuminate the rotating object. The 360° rotation helps achieve uniform curing on all sides.
- Stop Rotation: To stop the rotation, remove the turntable from the light source. There is no on/off switch; the device is entirely light-powered.
Image: The solar turntable in operation, rotating a 3D print under a UV light for curing.
Hình ảnh: Example setup of the turntable within a DIY curing station, demonstrating its use with a UV light.
7. Bảo trì
- Vệ sinh: Wipe the turntable with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the internal components. Do not use abrasive cleaners or solvents.
- Kho: When not in use, store the turntable in a cool, dry place away from direct sunlight to prevent unnecessary rotation and potential wear.
- Điều tra: Periodically check the turntable for any signs of damage or obstruction that might hinder its rotation.
KHAI THÁC. Xử lý sự cố
- Problem: Turntable does not rotate.
- Giải pháp 1: Ensure the solar panels on the base are exposed to sufficient light. The device requires strong light (natural sunlight, UV lamp, or bright fluorescent light) to operate.
- Giải pháp 2: Check if the item placed on the turntable exceeds the maximum weight load (500g / 1.1 lbs).
- Giải pháp 3: Gently nudge the turntable to overcome initial inertia.
- Giải pháp 4: Ensure there are no obstructions preventing rotation.
- Problem: Rotation is slow or inconsistent.
- Giải pháp 1: Increase the intensity or proximity of the light source to the solar panels. Stronger light results in faster rotation.
- Giải pháp 2: Reduce the weight of the item on the turntable.
- Giải pháp 3: Ensure the turntable is on a perfectly flat surface to prevent friction.
9. Bảo hành và Hỗ trợ
Sovol is committed to providing quality products. If you encounter any issues with your Solar Turntable, please do not hesitate to contact Sovol customer support. We offer a full refund or replacement for product problems.
For support, please visit the official Sovol website or contact their customer service channels. Refer to your purchase documentation for specific contact details.