Portfolio Single Transitional Pendant Light

Portfolio Single Transitional Pendant Light

Model: Single Transitional Pendant Light

1. Giới thiệu

This manual provides essential instructions for the safe installation, operation, and maintenance of your Portfolio Single Transitional Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference. This pendant light is designed to accommodate a glass pendant shade (not included) to complement your interior decor.

2. Thông tin an toàn

  • CẢNH BÁO: Nguy cơ điện giật. Ngắt nguồn điện tại cầu dao hoặc hộp cầu chì trước khi lắp đặt hoặc bảo dưỡng.
  • Mọi kết nối điện phải tuân thủ quy định, quy chế địa phương hoặc Quy định Điện Quốc gia (NEC). Nếu bạn không quen với cách kết nối dây điện đúng cách, hãy tham khảo ý kiến ​​thợ điện có trình độ.
  • Đeo kính an toàn và đồ bảo hộ thích hợp trong quá trình lắp đặt.
  • Đảm bảo bề mặt lắp đặt có thể chịu được trọng lượng của thiết bị.
  • Không vượt quá mức tối đatage được chỉ định cho bóng đèn.
  • Thiết bị chiếu sáng này chỉ được sử dụng trong nhà.

3. Nội dung gói hàng

Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu cài đặt.

  • Pendant Light Fixture (Bronze finish)
  • Bộ phần cứng lắp đặt
  • Hướng dẫn sử dụng

Note: A glass pendant shade and light bulb are not included and must be purchased separately.

Portfolio Single Transitional Pendant Light fixture without shade

Image 1: The Portfolio Single Transitional Pendant Light fixture in bronze, shown without a glass shade. This image displays the ceiling canopy, downrod, and bulb socket assembly.

4. Các công cụ cần thiết (Không bao gồm)

  • Tuốc nơ vít đầu Phillips
  • Tua vít đầu phẳng
  • Kìm tuốt dây
  • Băng điện
  • Kính an toàn
  • Thang

5. Thiết lập và Cài đặt

Follow these steps carefully for proper installation. If you are unsure about any step, consult a qualified electrician.

  1. Tắt nguồn: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely. Verify power is off using a voltage thử nghiệm.
  2. Chuẩn bị dây điện: If replacing an existing fixture, carefully remove it. Ensure the electrical box is securely mounted and capable of supporting the new pendant light.
  3. Gắn giá đỡ: Secure the mounting bracket (from the hardware kit) to the electrical box using the provided screws.
  4. Điều chỉnh độ dài dây: Determine the desired hanging height for your pendant light. Adjust the cord length by pushing the cord through the canopy until the desired length is achieved. Secure the cord.
  5. Thực hiện kết nối điện: Connect the fixture's wires to the house wires:
    • Kết nối đen (Dây nóng) từ thiết bị chiếu sáng đến đen Dây nóng từ hộp điện.
    • Kết nối trắng (dây trung tính) từ thiết bị chiếu sáng đến trắng Dây (trung tính) từ hộp điện.
    • Kết nối đất dây (đồng trần hoặc màu xanh lá cây) từ đèn đến đất wire from the electrical box and to the mounting bracket.
    Cố định tất cả các mối nối bằng đai ốc nối dây và quấn băng keo cách điện để tăng thêm độ an toàn.
  6. Gắn đồ đạc: Carefully push the wired connections into the electrical box. Align the canopy of the pendant light with the mounting bracket and secure it with the provided screws.
  7. Lắp đặt chụp đèn và bóng đèn: Attach your chosen glass pendant shade (if applicable) according to its specific instructions. Install an incandescent bulb (max 60 watts) into the socket.
  8. Khôi phục điện: Bật lại nguồn điện ở cầu dao hoặc hộp cầu chì. Kiểm tra đèn chiếu sáng.
Portfolio Single Transitional Pendant Light installed with a glass shade

Image 2: The Portfolio Single Transitional Pendant Light installed in a room, featuring a clear glass shade (not included with the fixture) and illuminating a wall.

6. Hướng dẫn vận hành

The Portfolio Single Transitional Pendant Light operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

Thay thế bóng đèn:

  1. Tắt nguồn điện cấp cho thiết bị chiếu sáng tại cầu dao.
  2. Allow the bulb to cool completely if it has been recently used.
  3. Cẩn thận tháo bóng đèn cũ ra.
  4. Screw in a new incandescent bulb (max 60 watts).
  5. Khôi phục lại nguồn điện và kiểm tra ánh sáng.

7. Bảo trì

To maintain the appearance and functionality of your pendant light:

  • Vệ sinh: Ngắt nguồn điện trước khi vệ sinh. Lau sạch thiết bị bằng vải mềm, khô. Không sử dụng chất tẩy rửa có tính mài mòn, dung môi hoặc chất đánh bóng vì chúng có thể làm hỏng lớp hoàn thiện.
  • Loại bóng đèn: Use only incandescent bulbs with a maximum wattagcông suất 60 watt.
  • Kiểm tra thường xuyên: Kiểm tra định kỳ tất cả các kết nối và phần cứng lắp đặt để đảm bảo chúng vẫn an toàn.

KHAI THÁC. Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Đèn không bật sáng1. Nguồn tắt
2. Kết nối dây lỏng lẻo
3. Bóng đèn bị lỗi
4. Faulty wall switch
1. Check circuit breaker/fuse
2. Verify all wire connections are secure (with power off)
3. Thay bóng đèn
4. Consult a qualified electrician
Ánh sáng nhấp nháy1. Bóng đèn lỏng lẻo
2. Kết nối dây lỏng lẻo
3. Loại/công suất bóng đèn không phù hợptage
1. Vặn chặt bóng đèn
2. Verify all wire connections are secure (with power off)
3. Ensure correct bulb type and wattage (max 60W incandescent)

9. Thông số kỹ thuật

  • Thương hiệu: Danh mục đầu tư
  • Người mẫu: Single Transitional Pendant Light
  • Màu sắc: Đồng
  • Vật liệu: Bronze, Glass (fixture is bronze, designed for glass shade)
  • Mẫu đèn cố định: Mặt dây chuyền
  • Nguồn điện: Điện có dây
  • Tậptage: 110 vôn
  • Cái gì?tage: Tối đa 60 watt
  • Loại nguồn sáng: sợi đốt
  • Số nguồn sáng: 1
  • Kiểu lắp đặt: Đèn thả trần
  • Trọng lượng sản phẩm: 1.24 pound
  • Kích thước gói hàng: 7.36 x 5.94 x 2.91 inch
  • UPC: 080629709522
  • ASIN: B07Y5MXSWQ

10. Bảo hành và Hỗ trợ

For warranty information or technical support, please refer to the retailer where the product was purchased or visit the official Portfolio brand webtrang web. Giữ lại bằng chứng mua hàng để yêu cầu bảo hành.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.