Giới thiệu
This manual provides instructions for the installation, operation, and maintenance of the Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Thông tin an toàn
Hướng dẫn an toàn quan trọng
- Đọc kỹ hướng dẫn này.
- Giữ lại những hướng dẫn này để tham khảo sau này.
- Heed all warnings provided with the product and in this manual.
- Thực hiện theo mọi hướng dẫn lắp đặt và vận hành.
- Không sử dụng thiết bị này gần nước hoặc trong môi trường quá ẩm ướt.
- Chỉ lau sạch bằng vải khô.
- Install the camera in accordance with the manufacturer's instructions and local electrical codes.
- Hãy giao việc bảo dưỡng cho nhân viên kỹ thuật có trình độ chuyên môn. Không tự ý sửa chữa sản phẩm này.
Nội dung gói
Những gì bao gồm
Verify that all items listed below are present in your package. If any items are missing or damaged, contact your supplier immediately.
- Pelco P2230L-ESR PTZ Network Camera
- Phần cứng gắn kết (ốc vít, neo)
- Mẫu cài đặt
- Hướng dẫn bắt đầu nhanh
Sản phẩm trênview
Thành phần máy ảnh
The Pelco P2230L-ESR is a high-performance PTZ (Pan-Tilt-Zoom) network camera designed for environmental surveillance. It features a 2-megapixel sensor, infrared (IR) illumination, Wide Dynamic Range (WDR), and full HD resolution for clear imaging in various conditions.
This image displays the Pelco P2230L-ESR PTZ Network Camera, showing its dome-shaped lower section containing the lens and the cylindrical upper housing.
Các tính năng chính
- Cảm biến: 1/3-inch CMOS Sensor
- Nghị quyết: 1920 x 1080 (Full HD 1080p)
- Ống kính: 4.3 mm ~ 129 mm varifocal Lens
- Thu phóng quang học: 30 lần
- Chiếu sáng hồng ngoại: 850 nm, up to 150 m range
- Mã hóa video: H.265, H.264, and MJPEG
- Phạm vi nghiêng: +15° to –90°
- Hiệu suất ánh sáng yếu: Down to 0.3 lux
- Dải động rộng (WDR): 100 dB
- Phát hiện: Sabotage and Simple Motion Detection
- Đánh giá môi trường: IP66 weatherproof for outdoor use
Cài đặt
Hướng dẫn cài đặt
The camera is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions. Proper installation is crucial for optimal performance and longevity.
This diagram illustrates the detailed dimensions of the Pelco P2230L-ESR camera in various views (front, side, top, bottom), providing measurements in both inches and centimeters for precise installation planning.
Dây điện và kết nối
- Kết nối nguồn điện: Connect the camera to a suitable power source as specified in the technical specifications. Ensure the power supply meets the camera's requirements.
- Kết nối mạng: Connect an Ethernet cable from the camera's network port to your network switch or router. This provides both data and potentially Power over Ethernet (PoE) if supported by your switch.
- Optional I/O Connections: If applicable, connect external alarm inputs/outputs or audio devices according to the camera's interface and your system requirements. Refer to the detailed wiring diagram in the full product manual for specific pinouts.
This image shows a standard blue Ethernet cable with RJ45 connectors, used for establishing a wired network connection to the camera.
Cấu hình mạng ban đầu
After physical installation, access the camera's web interface using its default IP address or by using a Pelco discovery tool. Follow the on-screen prompts to set up network parameters, create secure user accounts, and configure initial camera settings such as time zone and date.
Hoạt động
Hoạt động của máy ảnh
Truy cập vào Web Giao diện
Mở một web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar. Log in using your configured username and password. The web interface provides access to live view, recording settings, motion detection, and PTZ controls.
Pan-Tilt-Zoom (PTZ) Control
Use the PTZ controls within the camera's web interface or a compatible VMS (Video Management System) to adjust the camera's pan, tilt, and zoom functions.
- Xoay: Rotates the camera horizontally to cover a wider area.
- Nghiêng: Adjusts the camera's vertical angle to look up or down.
- Phóng: Magnifies or de-magnifies the view. The camera features a powerful 30x optical zoom for detailed observation.
Ghi và Lưu trữ
Configure recording schedules, motion-triggered recording, and continuous recording options. Set up storage destinations such as Network Attached Storage (NAS) or a local SD card (if supported by the specific camera model) for video archives.
Phát hiện chuyển động
Set up motion detection zones and sensitivity levels to trigger alarms, recordings, or notifications when movement is detected within the defined surveillance area. This feature helps in efficient monitoring and storage management.
BẢO TRÌ
Chăm sóc và bảo dưỡng
Vệ sinh
Regularly clean the camera's lens and housing with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the optical surfaces or the camera's finish. For stubborn dirt, use a mild soap solution.
Cập nhật chương trình cơ sở
Periodically check the official Pelco website for firmware updates. Keeping the camera's firmware up-to-date ensures optimal performance, enhances security features, and provides access to new functionalities. Follow the instructions provided with the firmware update package carefully.
Những cân nhắc về môi trường
Ensure the camera's seals and connections remain intact to maintain its IP66 weatherproof rating, especially after any maintenance or installation adjustments. Inspect for any signs of wear or damage that could compromise its environmental protection.
Xử lý sự cố
Các vấn đề thường gặp và giải pháp
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Không có nguồn cấp dữ liệu video | Power issue, network cable disconnected, incorrect IP address, camera malfunction | Check power supply, verify network cable connection, confirm IP address and network settings. Restart the camera. |
| Chất lượng hình ảnh kém | Dirty lens, improper focus, low light conditions, network bandwidth limitations | Clean the lens, adjust focus via the web interface, ensure adequate lighting, check network bandwidth and camera settings. |
| Bộ điều khiển PTZ không phản hồi | Network connectivity issues, software glitch, camera malfunction, incorrect user permissions | Verify network connection, restart the camera, update firmware, check user permissions in the web giao diện. |
| Phát hiện chuyển động không hoạt động | Incorrect sensitivity settings, detection zones not configured, event actions not set | Adjust motion detection sensitivity and ensure zones are properly defined in the web interface. Verify event actions are configured. |
| Không thể truy cập web giao diện | Incorrect IP address, firewall blocking, network issue, browser compatibility | Confirm camera's IP address, check local network settings and firewall rules. Try a different web trình duyệt. |
| IR illumination not working | IR sensor blocked, setting disabled, hardware fault, insufficient power | Ensure IR sensor is clear, check IR settings in the web interface, verify power supply. Contact support if issue persists. |
Thông số kỹ thuật
Thông số kỹ thuật
- Người mẫu: P2230L-ESR
- Cảm biến: 1/3-inch CMOS Sensor
- Nghị quyết: 1920 x 1080 (Full HD 1080p)
- Ống kính: 4.3 mm ~ 129 mm varifocal Lens
- Thu phóng quang học: 30 lần
- Phạm vi IR: Up to 150 m (850 nm IR Illumination)
- Mã hóa video: H.265, H.264, MJPEG
- Phạm vi nghiêng: +15° to –90°
- Ánh sáng yếu: Down to 0.3 lux
- Dải động rộng (WDR): 100 dB
- Tốc độ khung hình: Up to 60 Images per Second (ips)
- Phát hiện: Sabotage and Simple Motion Detection
- Đánh giá bảo vệ quốc tế: IP66 (Chịu được thời tiết)
- Kiểu lắp đặt: Treo tường
- Kết nối: Wi-Fi (Công nghệ truyền thông không dây)
- UPC: 700880346648
Bảo hành và Hỗ trợ
Product Warranty and Customer Support
For detailed warranty information, please refer to the official Pelco website or the warranty card included with your product package. Warranty terms and conditions may vary by region and purchase date.
For technical assistance, troubleshooting, or further inquiries regarding your Pelco P2230L-ESR camera, please contact Pelco customer support. Their team can provide expert guidance and resolve any issues you may encounter.
You can find contact information and additional resources, including comprehensive product documentation and FAQs, on the official Pelco webđịa điểm: www.pelco.com
