Phanteks Eclipse P400A Digital ATX Mid-tower Instruction Manual

1. Giới thiệu

This manual provides detailed instructions for the Phanteks Eclipse P400A Digital ATX Mid-tower chassis. It covers essential information regarding the product's features, setup, operation, and maintenance to ensure optimal performance and longevity. The Eclipse P400A is designed for high airflow and features a full metal mesh front panel, tempered glass side panel, and integrated Digital-RGB lighting.

2. Các tính năng chính

• Hiệu suất làm mát tối ưu: Features an ultra-fine performance mesh front panel for maximum airflow and a tempered glass side panel.
• Nội thất rộng rãi: Supports up to E-ATX motherboards, 280/360mm radiators in the front, and vertical GPU mounting (with optional bracket PH-VGPUKT_02).
• Integrated Digital-RGB Controller: Includes three pre-installed D-RGB fans that can sync with compatible motherboards for customizable lighting effects.
• Extensive Storage Options: Provides six HDD positions (two trays included) and eight SSD mounting locations (two dedicated brackets included).
• Easy Accessibility I/O: Front panel includes 2x USB 3.0 ports, microphone and headphone jacks, power button, reset button, and D-RGB controller.

3. Thiết lập và Cài đặt

Before beginning installation, ensure all components are accounted for and refer to your motherboard and component manuals for specific installation procedures. Always handle components with care and use anti-static precautions.

3.1 Unpacking the Chassis

Carefully remove the chassis from its packaging. Inspect for any damage during transit. Retain the packaging for future transport or storage.

Figure 3.1: Phanteks Eclipse P400A Digital ATX Mid-tower (White)

3.2 Tháo các tấm ốp bên

The tempered glass side panel is secured with thumbscrews. Carefully unscrew these and gently remove the panel. The opposite side panel can also be removed for cable management access.

3.3 Cài đặt bo mạch chủ

1. Lắp tấm chắn I/O vào khe hở phía sau của khung máy.
2. Align your ATX, micro-ATX, or mini-ITX motherboard with the pre-installed standoffs. For E-ATX motherboards up to 272mm wide, ensure optional HDD trays are not in use.
3. Cố định bo mạch chủ bằng các vít được cung cấp.

3.4 Cài đặt thành phần

• Card đồ họa (GPU): Install your graphics card into the appropriate PCIe slot on the motherboard. The case supports GPUs up to 420mm in length. Vertical GPU mounting is supported with the optional PH-VGPUKT_02 bracket.
• Bộ làm mát CPU: Install your CPU cooler. The case accommodates CPU coolers up to 160mm in height.
• Ổ đĩa lưu trữ: Utilize the dedicated SSD brackets and HDD trays for 2.5-inch and 3.5-inch drives respectively. The case offers extensive storage options with 6x HDD and 8x SSD mounting locations.
• Bộ cấp nguồn (PSU): Install the PSU in the designated compartment. The PSU clearance is 270mm.

3.5 Quản lý cáp

The chassis provides 25mm of space for cable management behind the motherboard tray. Utilize the included velcro ties and routing channels to organize cables for improved airflow and aesthetics.

4. Hoạt động

4.1 Bảng điều khiển I/O phía trước

The top front panel provides convenient access to essential controls and ports:

• Nút nguồn: Nhấn để bật hoặc tắt hệ thống.
• Nút Đặt lại: Nhấn để khởi động lại hệ thống.
• Cổng USB 3.0 (x2): Kết nối các thiết bị tương thích USB 3.0 để truyền dữ liệu tốc độ cao.
• Lỗ cắm microphone: Kết nối micrô của bạn.
• Giắc cắm tai nghe: Kết nối tai nghe hoặc loa của bạn.
• D-RGB Controller Buttons: Used to cycle through various Digital-RGB lighting modes and colors for the pre-installed fans and compatible D-RGB products.

Figure 4.1: Front I/O Panel Overview

4.2 Digital-RGB Lighting Control

The integrated D-RGB controller allows for direct control of the lighting effects. Alternatively, if your motherboard supports Digital-RGB synchronization, you can connect the case's D-RGB cables to your motherboard's header and control lighting via motherboard software.

5. Bảo trì

5.1 Vệ sinh bộ lọc bụi

To maintain optimal airflow and cooling performance, regularly clean the dust filters. The front mesh panel is designed for easy removal and cleaning. Other filters, such as those for the top and bottom fan mounts, should also be checked and cleaned periodically.

1. Gently pull the front mesh panel to detach it.
2. Use a soft brush or compressed air to remove accumulated dust.
3. Reattach the panel securely.

5.2 Tổng vệ sinh

Wipe the exterior surfaces of the chassis with a soft, damp Khăn lau. Tránh sử dụng các hóa chất mạnh hoặc vật liệu mài mòn có thể làm hỏng lớp phủ hoặc kính cường lực.

KHAI THÁC. Xử lý sự cố

• Quạt không quay/Đèn RGB không sáng:
  • Hãy đảm bảo tất cả các dây nguồn quạt được kết nối chắc chắn với các đầu cắm quạt trên bo mạch chủ hoặc bộ điều khiển quạt.
  • Verify that the D-RGB cables are correctly connected to the integrated controller or the motherboard's D-RGB header.
  • Check your motherboard's BIOS/UEFI settings or RGB software for fan speed and lighting control.
• Luồng khí kém/Nhiệt độ cao:
  • Clean all dust filters, especially the front mesh panel.
  • Đảm bảo quạt được định hướng đúng cách để tối ưu hóa khả năng hút và đẩy khí.
  • Verify that there are no obstructions to airflow inside the case, such as poorly managed cables.
• Các cổng I/O phía trước không hoạt động:
  • Check that all front panel connectors (USB, audio, power, reset) are correctly plugged into the corresponding headers on your motherboard.

7. Thông số kỹ thuật

8. Bảo hành và Hỗ trợ

Specific warranty details are not provided in this document. For warranty information, technical support, or further assistance, please visit the official Phanteks website or contact their customer service directly. Ensure you have your product model number (PH-EC400ATG_DWT01) and proof of purchase available when seeking support.

Phanteks chính thức Webđịa điểm: www.phanteks.com