KOMSHINE FX37 Core Alignment Fusion Splicer User Manual

1. Giới thiệu

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of the KOMSHINE FX37 Core Alignment Fusion Splicer. The FX37 is designed for precise fiber optic splicing, featuring fast splicing and heating times, a high-definition touch screen, and robust construction for various field applications.

Image: KOMSHINE FX37 Core Alignment Fusion Splicer, illustrating its main features including the 4.3-inch LCD monitor, 0.01dB average splicing loss, HD CMOS sensor, 7-second splicing, and 18-second heating.

2. Thông tin an toàn

Luôn tuân thủ các biện pháp phòng ngừa an toàn sau đây để tránh thương tích và hư hỏng thiết bị:

• Hãy đảm bảo khu vực làm việc sạch sẽ, khô ráo và đủ ánh sáng.
• Handle optical fibers with extreme care. Fiber shards are very sharp and can cause serious injury. Always use a fiber waste container.
• Do not look directly into the fiber end faces when the splicer is operating, as invisible laser light may be present.
• Use only the provided AC adapter and battery pack. Using unauthorized power sources may damage the device or cause fire.
• Keep the splicer away from water, moisture, and flammable materials.
• Không tự ý tháo rời hoặc sửa chữa thiết bị. Hãy liên hệ với nhân viên kỹ thuật có chuyên môn.

3. Nội dung gói hàng

Xác minh rằng tất cả các mục được liệt kê dưới đây đều có trong gói hàng của bạn:

Image: The complete KOMSHINE FX37 Fusion Splicer kit, including the splicer unit, carrying case, power adapter, fiber cleaver, strippers, and other essential accessories.

• Máy hàn nối hồ quang FX37 (1 chiếc)
• Bộ chuyển đổi nguồn AC (1 cái)
• Dụng cụ bóc vỏ sợi quang FIS (1 cái)
• Điện cực dự phòng (1 cặp)
• Bộ pin (1 bộ)
• Chai xịt cồn (1 chai)
• Cleaning Wipes (100 pieces)
• Kìm tuốt dây cáp dẹt (1 cái)
• Khay làm mát (1 cái)
• Fiber Cleaver TFC-30 (1 unit)
• Hướng dẫn sử dụng (1 chiếc)
• Túi đựng (1 chiếc)
• Protection Sleeves 60mm (100 pieces)

4. Tính năng sản phẩm

The KOMSHINE FX37 Fusion Splicer offers advanced features for reliable fiber optic splicing:

• Core Alignment: Precise core alignment method for ultra-low fiber fusion splicing consumption.
• Nối nhanh & Gia nhiệt: 7-second typical fusion splicing time and 18-second typical heating time.
• Màn hình độ nét cao: 4.3-inch high-definition capacitive touch screen for clear image display.
• Độ phóng đại hình ảnh: 320 times image magnification for detailed fiber inspection.
• Versatile Splicing Modes: 300 groups of fusion splicing modes and 100 groups of heating modes.
• Tuổi thọ pin dài: Built-in modular lithium battery supports approximately 330 splicing and heating cycles on a single charge.
• Lưu trữ dữ liệu: Stores 10,000 groups of fusion records and 64 images.
• Linh kiện bền bỉ: Ceramic presser foot, ceramic V-block, and all-in-one fixture.
• Chức năng tự động: Dual-direction splicing, automatic splicing, and intelligent pyrocondensation.
• Kết nối: USB and SD card interfaces for data transfer and U-disk automatic software upgrades.

5. Thiết lập

1. Tháo hộp: Carefully remove the splicer and all accessories from the carrying case. Place the splicer on a stable, clean, and level surface.
2. Lắp đặt/Sạc pin:

   The battery pack is typically pre-installed. If not, insert the battery pack into its compartment. Connect the AC adapter to the splicer and a power outlet to charge the battery. The charging indicator will show the status. A full charge supports approximately 330 splicing and heating operations.

   

   Image: Illustration of the FX37's battery, indicating 330 splicing cycles and 6800mAh capacity.

3. Bật nguồn: Press and hold the power button until the display illuminates. The splicer will perform a self-test.
4. Cài đặt ban đầu: Navigate through the touch screen menu to set language, date, time, and other preferences as needed.

6. Hướng dẫn vận hành

6.1 Chuẩn bị sợi

1. Tước bỏ: Use the FIS Fiber Stripper or Flat Cable Stripper to remove the fiber coating to the required length (typically 30-40mm). Ensure the stripping tool is clean and sharp.
2. Vệ sinh: Clean the stripped fiber thoroughly with an alcohol wipe (99% isopropyl alcohol) to remove any residue. Allow the alcohol to evaporate completely.
3. Phân tách: Place the cleaned fiber into the TFC-30 Fiber Cleaver. Ensure the fiber is positioned correctly according to the cleaver's instructions to achieve a precise 90-degree end face. Operate the cleaver to cut the fiber.

   Image: The TFC-30 Fiber Cleaver, used for preparing fiber ends for splicing.

4. Điều tra: Visually inspect the cleaved fiber end face for any imperfections using the splicer's magnified view. Recleave if necessary.

6.2 Quy trình nối

1. Open Wind Protector: Nhấc nắp chắn gió của máy hàn cáp lên.
2. Đặt các sợi: Carefully place the prepared fibers into the V-grooves of the splicer. Ensure the fiber ends are positioned correctly between the electrodes.

   Image: Step-by-step illustration of compatible fiber/cable types and their correct placement within the FX37 splicer's V-grooves.
3. Close Wind Protector: Đóng nhẹ tấm chắn gió. Máy nối cáp sẽ tự động bắt đầu quá trình căn chỉnh.
4. Nối tự động: The FX37 will automatically align the fiber cores and initiate the fusion splicing process. This typically takes 7 seconds. The display will show the splicing progress and estimated loss.

   Image: The FX37 display showing the splicing process, indicating a 7-second splicing time and 18-second heating time, with a typical loss of 0.01dB.

5. Kiểm tra mối nối: After splicing, the splicer will display the estimated splice loss. Visually inspect the splice point on the screen for any defects.

6.3 Quá trình gia nhiệt

1. Ống bảo vệ vị trí: Slide a protection sleeve over the spliced fiber.
2. Đặt vào máy sưởi: Open the heating oven cover and carefully place the spliced fiber with the protection sleeve into the heating oven.
3. Close Heater: Close the heating oven cover. The splicer will automatically begin the heating process, which typically takes 18 seconds.
4. Làm mát: Once heating is complete, carefully remove the fiber from the oven and place it in the cooling tray to cool down.

7. Bảo trì

7.1 Vệ sinh

• Rãnh chữ V và Clamps: Thường xuyên vệ sinh các rãnh chữ V và các sợi vải.amps with a cotton swab dipped in isopropyl alcohol to prevent dust and fiber debris from affecting splicing performance.
• Điện cực: Clean the electrodes periodically using a specialized electrode cleaner or a cotton swab with alcohol. Ensure the splicer is powered off before cleaning electrodes.
• Màn hình hiển thị: Use a soft, lint-free cloth to clean the touch screen. Do not use abrasive cleaners.

7.2 Thay thế điện cực

Electrodes have a limited lifespan (approximately 4,000 splices). When the splicer indicates electrode wear or splicing performance degrades, replace them:

Hình ảnh: Cận cảnh view of the FX37 electrodes, highlighting their position and the integrated LED lighting for dim environments.

1. Power off the splicer and disconnect the power adapter.
2. Carefully remove the old electrodes using the provided tool or tweezers.
3. Insert the new spare electrodes, ensuring they are correctly seated.
4. Power on the splicer and perform an arc calibration (refer to the splicer's on-screen menu for this function).

KHAI THÁC. Xử lý sự cố

9. Thông số kỹ thuật

10. Bảo hành và Hỗ trợ

The KOMSHINE FX37 Fusion Splicer comes with a Bảo hành 1 năm kể từ ngày mua. Bảo hành này bao gồm các lỗi sản xuất và trục trặc trong quá trình sử dụng bình thường. Vui lòng giữ lại hóa đơn mua hàng để yêu cầu bảo hành.

For technical support, service, or warranty inquiries, please contact your authorized KOMSHINE dealer or visit the official KOMSHINE webtrang web để biết thông tin liên hệ.

Note: All buyers are responsible for customs clearance in a timely manner. If assistance is needed, please contact the seller in advance.