1. Sản phẩm hếtview
The Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge (Model 69ELF114TWG) is designed to reduce incoming water pressure to a safe and consistent level for residential and commercial plumbing systems. This unit features a compact design, lead-free bronze construction, and an integrated internal bypass mechanism. It includes a color-coded gauge for easy pressure monitoring and adjustment.
Figure 1: Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge. This image shows the regulator with its integrated pressure gauge and yellow adjustment handle.
2. Thông tin an toàn
- Luôn luôn khóa van cấp nước chính trước khi bắt đầu bất kỳ công việc lắp đặt hoặc bảo trì nào.
- Đeo thiết bị bảo hộ cá nhân (PPE) phù hợp, chẳng hạn như kính an toàn và găng tay.
- Hãy đảm bảo tất cả các mối nối được bịt kín đúng cách để tránh rò rỉ.
- Consult local plumbing codes and regulations for proper installation procedures.
- Nếu bạn không chắc chắn về bất kỳ phần nào của quá trình lắp đặt, hãy tham khảo ý kiến của thợ sửa ống nước có trình độ.
3. Nội dung gói hàng
Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu cài đặt:
- 1x Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator
- 1x Integrated Pressure Gauge
4. Cài đặt
This regulator features a double union PEX-A (cold expansion) barb design for simplified installation in PEX-A piping systems. Ensure the regulator is installed in the correct flow direction, indicated by an arrow on the body.
- Chuẩn bị địa điểm cài đặt: Turn off the main water supply. Drain the water lines to relieve pressure. Select a suitable location for the regulator, typically after the main shut-off valve and before any branch lines.
- Cut and Prepare PEX-A Piping: Cut the PEX-A pipe to the required length, ensuring clean, square cuts. Prepare the pipe ends for cold expansion connections according to PEX-A system manufacturer guidelines.
- Connect the Regulator:
- Apply appropriate thread sealant (e.g., Teflon tape or pipe dope) to the male threads of the PEX-A fittings.
- Thread the PEX-A fittings onto the double union ends of the regulator. Ensure the flow arrow on the regulator body points in the direction of water flow into the building.
- Tighten the union nuts securely, but do not overtighten.
- Perform cold expansion connections on the PEX-A pipe ends to the fittings according to PEX-A system manufacturer instructions.
- Lắp đồng hồ đo áp suất: The pressure gauge is typically pre-installed. Ensure it is securely threaded into the designated port on the regulator body.
- Khôi phục nguồn cung cấp nước và kiểm tra rò rỉ: Slowly turn on the main water supply. Carefully inspect all connections for any signs of leaks. Tighten connections as necessary.
Hình 2: Mặt bên view of the Apollo Water Pressure Regulator, showing the double union PEX-A connections and the flow direction arrow. Note the "MAX INLET 400 PSI" marking.
5. Hướng dẫn vận hành
The regulator is factory-set at 50 psi and is adjustable from 15 psi to 75 psi. No special tools are required for adjustment.
- Kiểm tra áp suất hiện tại: Observe the reading on the integrated pressure gauge. The gauge is color-coded to indicate pressure ranges (e.g., Low, Optimal, Excessive).
- Điều chỉnh áp suất:
- ĐẾN tăng pressure: Turn the yellow adjustment handle theo chiều kim đồng hồ.
- ĐẾN giảm bớt pressure: Turn the yellow adjustment handle ngược chiều kim đồng hồ.
- Make small adjustments and allow the system pressure to stabilize before re-checking the gauge.
- Xác nhận cài đặt: Once the desired pressure is achieved (typically between 50-60 psi for most residential applications), confirm the reading on the gauge.
Hình 3: Cận cảnh view of the Apollo Water Pressure Regulator, highlighting the pressure gauge with its color-coded optimal range and the yellow adjustment handle.
6. Bảo trì
The Apollo Water Pressure Regulator is designed for minimal maintenance. Regular checks can help ensure optimal performance.
- Periodic Pressure Check: Periodically check the pressure gauge to ensure the system pressure remains at the desired setting. Fluctuations may indicate a need for adjustment or inspection.
- Kiểm tra rò rỉ: Annually inspect the regulator and connections for any signs of leaks or corrosion.
- Vệ sinh: Làm sạch bên ngoài bộ điều chỉnh bằng adamp Lau sạch bằng khăn khi cần thiết. Không sử dụng hóa chất mạnh.
- Sediment Filter (Optional): If your water supply contains significant sediment, consider installing a sediment filter upstream of the pressure regulator to prevent internal clogging.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| No water flow or very low pressure downstream | Regulator set too low; Main water supply off; Regulator clogged. | Increase pressure setting; Check main water valve; Inspect for debris (consult a plumber if necessary). |
| Pressure too high downstream | Regulator set too high; Regulator malfunction. | Decrease pressure setting; If problem persists, regulator may need replacement. |
| Water hammer or fluctuating pressure | Rapid changes in water demand; Regulator bypass mechanism issue. | Ensure proper air chambers are installed in the plumbing system; Consult a plumber for regulator inspection. |
| Rò rỉ tại các kết nối | Improperly tightened connections; Insufficient thread sealant. | Tighten connections; Reapply thread sealant if necessary (ensure water supply is off first). |
8. Thông số kỹ thuật
- Người mẫu: 69ELF114TWG
- Vật liệu: Đồng
- Kích thước kết nối đầu vào: 3/4 inch
- Loại kết nối đầu vào: Cross Linked Polyethylene (PEX-A)
- Loại kết nối ổ cắm: PEX
- Áp suất vận hành tối đa: 400 PSI (Inlet)
- Phạm vi áp suất có thể điều chỉnh: 15 - 75 PSI (Factory-set at 50 PSI)
- Kích thước sản phẩm (L x W x H): 2.13 x 7 x 8 inch
- Trọng lượng sản phẩm: 2.53 pound
- Chứng nhận: Certified to ASSE 1003 and CSA B356, listed by ASSE and IAPMO (cUPC)
- Tính năng đặc biệt: Integrated internal bypass mechanism, Color-coded gauge
9. Bảo hành và Hỗ trợ
This Apollo Water Pressure Regulator comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Apollo customer support.
For technical support or inquiries, please visit the official Apollo webtrang web hoặc liên hệ với bộ phận dịch vụ khách hàng của họ.