Giới thiệu
This manual provides essential information for the safe and efficient operation of your Renogy 2000W 12V Pure Sine Wave Power Inverter. This device converts 12V DC battery power into 230V AC household power, suitable for a wide range of electronic devices and appliances. Please read this manual thoroughly before installation and use, and retain it for future reference.
Image: The Renogy 2000W Pure Sine Wave Power Inverter, a black rectangular unit with blue accents, shown in a typical outdoor setting.
Hướng dẫn an toàn
- An toàn điện: Always ensure proper grounding. Do not expose the inverter to water, rain, or excessive moisture. Operate in a well-ventilated area.
- Kết nối pin: Connect the inverter directly to a 12V deep cycle battery. Ensure correct polarity (positive to positive, negative to negative). Incorrect connections can damage the inverter and battery.
- Sức chịu tải: Do not exceed the inverter's continuous power rating of 2000W or peak power rating of 4000W. Overloading can cause damage and pose a fire hazard.
- Thông gió: Đảm bảo luồng không khí lưu thông tốt xung quanh bộ biến tần để tránh quá nhiệt. Không được chặn các lỗ thông gió.
- Trẻ em và vật nuôi: Để bộ biến tần xa tầm tay trẻ em và vật nuôi.
- BẢO TRÌ: Disconnect all power before performing any maintenance or cleaning.
Nội dung gói
Xác minh rằng tất cả các mục đều có trong gói hàng:
- Renogy 2000W 12V 220V Pure Sine Wave Inverter x 1
- 20 mm² Cable x 1
- Remote Control (cable length: approximately 3m) x 1
Image: A close-up of a high-quality copper cable, indicating the type of accessory included for optimal performance.
Tính năng sản phẩm
- Powerful DC-AC Conversion: Provides 2000W continuous power (4000W peak) from 12V DC to 230V AC with 90% conversion efficiency.
- Công nghệ sóng sin thuần túy: Delivers stable, clean power comparable to grid electricity, protecting sensitive electronics and extending their lifespan.
- Comprehensive Protection System: Features LED indicators for under-voltage, quá voltage, over-temperature, overload, and short-circuit protection. Includes a cooling fan and internal DC fuse for enhanced safety.
- Integrated Grid Priority Circuit: Ensures continuous 230V power by automatically switching between shore power and inverter power.
- Phạm vi ứng dụng rộng rãi: Suitable for PCs, laptops, tablets, medical devices, and various household appliances.
- Thiết kế thân thiện với người dùng: Equipped with 2 AC outlets and a remote control for convenient operation.
- Kết cấu bền bỉ: Kim loại chắc chắn casing protects against impacts. High-speed fans maintain optimal operating temperature.
Hình ảnh: Mặt trước view of the Renogy 2000W Inverter, highlighting the two AC outlets and the main power switch.
Image: The Renogy 2000W Inverter displaying icons for its six electronic protection features, including over-temperature, short circuit, and overload protection.
Hình ảnh: Phía sau view of the inverter, showing the dual cooling fans designed for powerful heat dissipation and efficient system operation.
Cài đặt
Vị trí lắp đặt
Install the inverter in a dry, cool, and well-ventilated area. Avoid direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for proper airflow.
Sơ đồ đấu dây
Follow the diagram below for correct connection of the inverter to your solar power system. Ensure all connections are secure and properly insulated.
Image: A detailed wiring diagram illustrating the connections between solar panels, charge controller, battery, inverter, and various DC/AC loads in a solar power system.
Kết nối với pin
- Ensure the inverter is switched OFF.
- Connect the supplied 20 mm² cable to the DC input terminals on the rear of the inverter. Ensure positive (+) is connected to positive and negative (-) to negative.
- Connect the other end of the cables to your 12V deep cycle battery. Use appropriate fuses or circuit breakers as recommended for your system.
- Tighten all connections securely to prevent loose contacts and arcing.
Kết nối tải AC
Plug your AC appliances directly into the 230V AC outlets on the front of the inverter. Ensure the total power consumption of your appliances does not exceed 2000W.
Hướng dẫn sử dụng
Bật/Tắt nguồn
- Ensure all DC and AC connections are correctly made.
- Press the main power switch on the front of the inverter to the 'ON' position. The indicator lights will illuminate.
- To power off, switch the main power switch to the 'OFF' position.
Sử dụng điều khiển từ xa
The included remote control allows you to power the inverter on or off from a distance, which is convenient when the inverter is installed in an inaccessible location.
Image: The remote control unit for the Renogy inverter, featuring an on/off switch and indicator lights, mounted on a wooden surface.
- Connect the remote control cable to the designated port on the inverter.
- Use the switch on the remote control to turn the inverter ON or OFF.
Đèn báo
The inverter features LED indicators that provide status information and alert you to potential issues:
- Đèn LED xanh: Biểu thị hoạt động bình thường.
- Dẫn màu đỏ: Indicates a fault or protection mode (e.g., overload, over-temperature, low voltage). Refer to the Troubleshooting section for details.
BẢO TRÌ
- Vệ sinh: Vệ sinh bên ngoài bộ biến tần định kỳ bằng khăn khô. Đảm bảo các lỗ thông gió không có bụi bẩn. Không sử dụng chất tẩy rửa dạng lỏng.
- Kiểm tra kết nối: Regularly inspect all DC and AC connections for tightness and corrosion. Tighten any loose connections.
- Tình trạng pin: Ensure your battery is well-maintained and charged to prolong its lifespan and the inverter's performance.
Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Biến tần không bật | Loose battery connection; Low battery voltage; Cầu chì bị cháy | Check battery connections; Charge battery; Replace fuse (if applicable and safe to do so) |
| Không có đầu ra AC | Overload; Over-temperature; Low/High input voltage | Reduce load; Allow inverter to cool; Check battery voltage |
| Red LED indicator is on | Overload; Over-temperature; Input voltage out of range; Short circuit | Identify and resolve the specific fault condition. Disconnect loads, check connections, allow cooling. |
| Quạt không hoạt động | Normal operation (fan activates under load/temperature); Fan malfunction | Ensure inverter is under load or operating at higher temperatures. If no fan operation under load, contact support. |
Thông số kỹ thuật
| Đặc điểm kỹ thuật | Giá trị |
|---|---|
| Thương hiệu | Renogy |
| Tên mẫu | R-INVT-PUH1-201235-DE/EU |
| Nguồn (Liên tục) | 2000 Watt |
| Công suất đầu ra đỉnh | 4000 Watt |
| Đầu vào Voltage | 12 Vôn (DC) |
| Đầu ra Voltage | 230 Vôn (AC) |
| Dạng sóng đầu ra | Sóng sin tinh khiết |
| Tính thường xuyên | 50Hz |
| Tổng số ổ cắm điện | 2 |
| Kích thước (D x R x C) | 48.2L x 22W x 9.2Hcm |
| Trọng lượng sản phẩm | 4.8 Kilôgam |
| Sử dụng được đề xuất | Powering sensitive electronics during camping or outdoor activities, medical devices, household appliances during travel or off-grid living. |
| Chứng nhận | ETL, CE, UKCA, RoHS, ECE R10 |
Bảo hành và Hỗ trợ
The Renogy 2000W 12V Pure Sine Wave Power Inverter comes with a Bảo hành 2 năm covering materials and manufacturing defects.
For technical support, warranty claims, or any product-related inquiries, please contact Renogy customer service directly. If you encounter any issues, especially transport-related damage, please reach out via buyer message for assistance with replacement or partial refund options.
Please visit the official Renogy webtrang web hoặc tham khảo tài liệu mua hàng của bạn để biết thông tin liên hệ mới nhất.