1. Giới thiệu
The FTVOGUE Polypropylene Water Level Sensor Vertical Float Switch is designed for reliable and automatic liquid level control. This device is suitable for a wide range of applications, including water supply, drainage systems, and automatic liquid level control in various tanks or reservoirs. Its robust construction ensures stable performance and long service life.
2. Thông tin an toàn
- Always disconnect power to the pump or system before installation, maintenance, or troubleshooting.
- Hãy đảm bảo tất cả các mối nối điện đều được cách điện và bảo vệ đúng cách khỏi hơi ẩm.
- Không được vượt quá định mức điện áp quy định của công tắc.
- Operate within the recommended temperature range of 30°C to 80°C. Avoid temperatures above 85°C.
- Nếu bạn không chắc chắn về việc đấu dây điện, việc lắp đặt nên được thực hiện bởi nhân viên có chuyên môn.
3. Sản phẩm hếtview
This vertical float switch is constructed from high-quality polypropylene, offering strong anti-interference capabilities, high stability, and resistance to corrosion. Its compact size facilitates easy installation and integration into existing systems.
Các tính năng chính:
- Vật liệu: High-quality Polypropylene
- Độ bền: Non-toxic, corrosion-resistant, strong anti-interference ability
- Sự ổn định: High stability and long service life
- Cài đặt: Small size, simple wiring, easy to install and use
- Hiệu quả năng lượng: Tiêu thụ điện năng thấp
- Nhiệt độ hoạt động: 30°C to 80°C (maximum 85°C)
Figure 3.1: FTVOGUE Vertical Float Switch, showing the main body and yellow connecting wires.
Hình 3.2: Mặt bên view of the float switch, highlighting its polypropylene construction and compact design.
4. Thông số kỹ thuật
| Đặc điểm kỹ thuật | Giá trị |
|---|---|
| Thương hiệu | FTVOGUE |
| Số hiệu mẫu | FTVOGUEfbmo2hzndy |
| Vật liệu | Polypropylen |
| Trọng lượng sản phẩm | 10 gam |
| Kích thước sản phẩm | 6.8 x 2.5 x 2.5cm |
| Nhiệt độ hoạt động | 30°C to 80°C (max 85°C) |
| Pin cần thiết | KHÔNG |
| Nước xuất xứ | Trung Quốc |
5. Thiết lập và Cài đặt
Proper installation is crucial for the accurate and reliable operation of the float switch. This device is designed for vertical mounting.
Các bước cài đặt:
- Chọn Vị trí: Select a suitable location within the tank or reservoir where the liquid level needs to be monitored. Ensure the float can move freely without obstruction.
- Lắp đặt: Securely mount the float switch in a vertical position. The threaded portion of the switch is designed for easy integration into a compatible fitting. Use the provided sealing washer to ensure a watertight seal.
- Dây điện: Connect the two yellow wires of the float switch to your pump control circuit. The switch acts as a simple open/close contact. Consult your pump's wiring diagram for specific connection points for liquid level control.
- Bài kiểm tra: After installation and wiring, carefully restore power and test the switch by manually raising and lowering the liquid level (or simulating it) to ensure it activates and deactivates the pump as intended.
Figure 5.1: The float switch shown in its intended vertical mounting orientation.
Figure 5.2: Close-up of the wiring connections on the float switch.
6. Hướng dẫn vận hành
The FTVOGUE Vertical Float Switch operates based on the principle of buoyancy. As the liquid level changes, the internal float moves, activating or deactivating an electrical contact.
Hoạt động:
- When the liquid level rises, the float moves upwards. At a predetermined level, the float's movement triggers an internal switch.
- When the liquid level falls, the float moves downwards. At a predetermined level, the float's movement triggers the internal switch in the opposite direction.
- This switching action can be used to start or stop a pump, activate an alarm, or control other devices based on the liquid level.
- The switch can be configured for either normally open (NO) or normally closed (NC) operation depending on your wiring and application requirements.
7. Bảo trì
The FTVOGUE float switch is designed for minimal maintenance due to its durable polypropylene construction. However, periodic inspection is recommended to ensure optimal performance.
Mẹo bảo trì:
- Kiểm tra trực quan: Regularly check the float switch for any signs of physical damage, wear, or accumulation of debris that might impede float movement.
- Vệ sinh: If operating in environments with suspended solids or viscous liquids, periodically clean the float and stem to prevent buildup. Use mild soap and water; avoid harsh chemicals.
- Kiểm tra hệ thống dây điện: Hãy đảm bảo tất cả các mối nối điện đều chắc chắn và không bị ăn mòn.
- Kiểm tra chức năng: Periodically test the switch's operation by observing its response to changing liquid levels.
KHAI THÁC. Xử lý sự cố
If the float switch is not operating as expected, consider the following common issues and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Công tắc không kích hoạt/vô hiệu hóa | Dây điện không đúng | Verify wiring against your pump control circuit diagram. |
| Phao bị cản trở | Check for debris or physical obstructions preventing float movement. Clean if necessary. | |
| Công tắc bị lỗi | Test the switch with a multimeter for continuity. Replace if faulty. | |
| Inconsistent switching | Debris on float/stem | Clean the float and stem thoroughly. |
| Excessive turbulence | Consider installing a baffle or stilling tube around the float switch to reduce turbulence. |
9. Bảo hành và Hỗ trợ
For warranty information or technical support, please contact FTVOGUE customer service through the retailer where the product was purchased or visit the official FTVOGUE brand store online. Please have your model number (FTVOGUEfbmo2hzndy) and purchase details ready when contacting support.
FTVOGUE is committed to providing quality products and customer satisfaction. For more information about FTVOGUE products, you can visit the FTVOGUE Store.