Dioche Passive IP Coaxial Transceiver User Manual

1. Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of the Dioche Passive IP Coaxial Transceiver. This device is designed to transmit real-time digital signals from IP cameras over existing coaxial cables, offering a cost-effective solution for upgrading surveillance systems without replacing extensive cabling infrastructure.

The transceiver pair allows for efficient data transmission up to 220 meters, supporting 10/100Mbps speeds. It is a passive device, requiring no external power, which simplifies installation and reduces operational costs.

Image 1.1: The Dioche Passive IP Coaxial Transceiver pair, showing the RJ45 and BNC connectors.

2. Nội dung gói hàng

Please verify that all items listed below are present in your package. If any items are missing or damaged, contact your retailer.

• 1 Pair of Dioche Passive IP Coaxial Transceivers
• Hướng dẫn sử dụng (tài liệu này)

Hình ảnh 2.1: Cận cảnh view of the transceiver's RJ45 and BNC connectors.

3. Các tính năng chính

• Coaxial Transmission: Utilizes existing coaxial lines for real-time digital signal transmission.
• Phạm vi mở rộng: Supports transmission distances up to 220 meters (721 feet).
• Cài đặt dễ dàng: Designed for quick and straightforward setup, reducing installation costs and time.
• Passive Operation: No external power supply is required for the device to function.
• Chống sét lan truyền: Built-in surge guard enhances safety and device longevity.
• System Upgrade Facilitation: Enables replacement of analog cameras with network digital cameras without changing existing coaxial cables.

4. Thông số kỹ thuật

Image 4.1: Physical dimensions of the transceiver unit.

5. Hướng dẫn thiết lập

The Dioche Passive IP Coaxial Transceiver is designed for straightforward installation. Follow these steps to connect your IP camera to an NVR system using existing coaxial cables.

1. Xác định các thành phần: Locate one transceiver for the camera side and one for the NVR side. Both units are identical.
2. Connect to IP Camera:
   • Connect the RJ45 (Ethernet) connector of one transceiver to the Ethernet port of your IP camera.
   • Connect the BNC (coaxial) connector of the same transceiver to one end of your coaxial cable (e.g., RG59).
3. Connect to NVR/Network Switch:
   • Connect the other end of the coaxial cable to the BNC connector of the second transceiver.
   • Connect the RJ45 (Ethernet) connector of this second transceiver to an available Ethernet port on your NVR (Network Video Recorder) or a network switch connected to your NVR.
4. Xác minh kết nối: Once both transceivers are connected, the IP camera should be able to communicate with the NVR system over the coaxial cable. No additional power supply is needed for the transceivers.

Lưu ý quan trọng:

• This product is exclusively designed for use with IP Cameras (IPCs) and NVR systems.
• It is not intended for general computer network networking applications.

Image 5.1: Connection diagram illustrating how to integrate the transceivers into an IP surveillance system.

6. Hoạt động

The Dioche Passive IP Coaxial Transceiver operates automatically once connected correctly. As a passive device, it does not require any configuration or external power. It functions by converting the Ethernet signal from the IP camera into a format suitable for transmission over coaxial cable, and then converting it back to Ethernet at the NVR end.

Ensure that your IP camera and NVR are powered on and configured according to their respective manuals. The transceivers will facilitate the network connection between them over the coaxial infrastructure.

7. Bảo trì

The Dioche Passive IP Coaxial Transceiver is a low-maintenance device. To ensure optimal performance and longevity:

• Hãy giữ cho các thiết bị luôn sạch sẽ và không bị bám bụi bẩn. Sử dụng khăn mềm, khô để lau chùi.
• Avoid exposing the transceivers to extreme temperatures or high humidity beyond the specified operating conditions.
• Hãy đảm bảo tất cả các kết nối cáp đều chắc chắn và không bị hư hỏng.
• Do not attempt to open or modify the device, as this will void any potential warranty and may cause damage.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your Dioche Passive IP Coaxial Transceiver, refer to the following common troubleshooting steps:

• Không có kết nối mạng:
  • Verify that both transceivers are securely connected to the IP camera, coaxial cable, and NVR/network switch.
  • Ensure the coaxial cable is intact and not damaged. Test the cable if possible.
  • Confirm that the IP camera and NVR are powered on and functioning correctly.
  • Check if the coaxial cable length exceeds the maximum recommended distance of 220 meters.
• Kết nối không liên tục:
  • Inspect all connectors (RJ45 and BNC) for loose connections or corrosion.
  • Ensure the coaxial cable is of good quality (e.g., RG59) and free from interference sources.
• Thiết bị không hoạt động:
  • Remember that this is a passive device and does not have indicator lights or require external power. Its functionality is dependent on proper connections and the operational status of the connected IP camera and NVR.
  • Confirm that the application is for IP cameras and NVRs, not general computer networking.

Nếu sự cố vẫn tiếp diễn sau khi thực hiện các bước trên, vui lòng liên hệ bộ phận hỗ trợ khách hàng.

9. Bảo hành và Hỗ trợ

Thông tin bảo hành:

Dioche products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. Keep your proof of purchase for warranty claims.

Hỗ trợ khách hàng:

If you require technical assistance or have questions regarding your Dioche Passive IP Coaxial Transceiver, please contact your point of purchase or visit the official Dioche brand store for further information and support resources.

Visit the Dioche Official Store