Sản phẩm trênview
The Gebildet Dash Cam Hardwire Kit provides a reliable and continuous power supply for your dash camera, GPS navigator, or radar detector directly from your vehicle's electrical system. This kit is designed to prevent battery drain with its integrated low voltage protection, automatically shutting off power when the vehicle's battery voltage drops below a safe level (11.6V for 12V systems, 23.2V for 24V systems), ensuring enough power remains to start your engine. It supports 12V-24V vehicle input and provides a stable 5V output via a Mini USB connector.
The kit includes various fuse holders (ACN, ACS, ACU) and a fuse puller, making installation straightforward and compatible with most vehicle fuse boxes. Its sufficient cable length allows for discreet and clean wiring within your vehicle.
Nội dung gói
Vui lòng xác minh rằng tất cả các mục được liệt kê dưới đây đều có trong gói hàng của bạn:
- 1 x 12V-24V to 5V Converter Kit (Hardwire Kit)
- 1 x ACN Add-A-Circuit Fuse Holder
- 1 x ACS Add-A-Circuit Fuse Holder
- 1 x ACU Add-A-Circuit Fuse Holder
- 1 x Flat Blade Fuse
- 1 x Small Blade Fuse
- 1 x Standard Blade Fuse
- 1 x Fuse Puller
Image: All components included in the Gebildet Dash Cam Hardwire Kit, showing the main converter, various fuse taps, and fuses.
Thiết lập và cài đặt
Before beginning installation, ensure your vehicle is turned off and the ignition is in the OFF position. It is recommended to disconnect the negative terminal of your car battery for safety.
1. Check USB Compatibility
This hardwire kit is designed for devices with a Mini USB input. Please confirm your dash cam or other device uses a Mini USB port, not a Micro USB port, to ensure proper connection.
Image: Visual comparison of Mini USB (compatible) and Micro USB (incompatible) ports, highlighting the correct connector type for this kit.
2. Identify Fuse Box and Fuse Types
Locate your vehicle's fuse box, typically found under the dashboard, in the glove compartment, or in the engine bay. Identify an appropriate fuse slot for the hardwire kit. You will need two types of fuse connections:
- Constant Power (BATACC): A fuse that provides continuous power even when the ignition is off. This is for parking mode functionality.
- Nguồn điện phụ (ACC): A fuse that provides power only when the ignition is on. This is for normal recording while driving.
Use the included fuse puller to remove the existing fuse from the chosen slot. Select the correct add-a-circuit fuse holder (ACN, ACS, or ACU) that matches your vehicle's fuse type (Flat Blade, Small Blade, or Standard Blade).
Image: Diagram illustrating how to use the add-a-circuit fuse adapter. The original fuse goes into one slot, and a new fuse for the hardwire kit goes into the other, ensuring both circuits are protected.
3. Kết nối dây
The hardwire kit has two main wires for connection:
- Dây đỏ (ACC): Connect this wire to the add-a-circuit fuse holder that will be inserted into an ACC (Accessory) fuse slot. This ensures the dash cam powers on and off with your vehicle's ignition.
- Dây màu đen (NND): Connect this wire to any unpainted metal part of the car chassis, which serves as a ground point.
Image: Clear diagram showing the red wire connecting to ACC (Accessory power) via a fuse tap, and the black wire connecting to a ground point on the car chassis.
The kit is designed for easy connection without specialized tools. Simply insert the wire ends into the appropriate connectors and ensure a secure fit.
Image: Four-panel illustration demonstrating the simple process of connecting the hardwire kit's wires to the fuse tap and ground terminal, showing a secure, tool-free connection.
4. Cable Routing and Device Connection
Route the output cable (Mini USB) from the hardwire kit to your dash cam. The total length of the hardwire kit is approximately 3.2 meters (0.95m input, 2.2m output), providing ample length for discreet routing along the vehicle's A-pillar, headliner, or dashboard. Connect the Mini USB plug to your dash cam.
Hình ảnh: Example of a dash cam hardwire installation in a car, showing the cable routed neatly along the windshield and the fuse box location. This setup enables low-voltage battery drain protection.
Image: Diagram showing the dimensions of the hardwire kit, including the 95cm input line length and 202cm output line length, totaling approximately 3.2 meters for flexible installation.
Once all connections are secure, reconnect the negative terminal of your car battery. Turn on your vehicle's ignition to test the dash cam's functionality.
Hướng dẫn sử dụng
The Gebildet Hardwire Kit is designed for automatic operation, providing seamless power to your connected device.
- Chế độ lái: When connected to an ACC (Accessory) fuse, your dash cam will power on automatically when you start your vehicle and power off when you turn off the ignition.
- Parking Mode (if supported by your dash cam): If your dash cam supports parking mode and is connected to a constant power fuse, the hardwire kit will continue to supply power to the dash cam even when the vehicle is off.
- Âm lượng thấptage Bảo vệ: The built-in low voltage protection feature monitors your vehicle's battery voltage. Nếu voltage drops below 11.6V (for 12V systems) or 23.2V (for 24V systems), the hardwire kit will automatically cut off power to the dash cam to prevent complete battery discharge, ensuring you can still start your vehicle.
BẢO TRÌ
The Gebildet Hardwire Kit requires minimal maintenance. To ensure optimal performance and longevity:
- Periodically check all connections (fuse box, ground point, Mini USB) to ensure they remain secure and free from corrosion.
- Inspect the cables for any signs of wear, fraying, or damage. Replace the kit if any significant damage is observed.
- Ensure the hardwire kit's main unit (power box) is not exposed to extreme temperatures or direct moisture.
Xử lý sự cố
If you encounter issues with your Gebildet Dash Cam Hardwire Kit, refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Camera hành trình không bật được. |
|
|
| Vehicle battery drains despite low voltage bảo vệ. |
|
|
| Interference with DAB+ radio or GPS. |
|
|
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Số hiệu mẫu | E188 |
| Đầu vào Voltage | Điện áp một chiều 12V-24V |
| Đầu ra Voltage | Điện áp một chiều 5V |
| Dòng điện đầu ra | 2.5A |
| Âm lượng thấptagBảo vệ điện tử (12V) | 11.6V |
| Âm lượng thấptagBảo vệ điện tử (24V) | 23.2V |
| Chiều dài cáp đầu vào | 0.95 m (95 cm) |
| Chiều dài cáp đầu ra | 2.2 m (220 cm) |
| Tổng chiều dài cáp | Xấp xỉ 3.2 m |
| Loại đầu nối | USB nhỏ |
| Kích thước sản phẩm | 17 x 10 x 2.2cm |
| Trọng lượng sản phẩm | 130 gram |
Bảo hành và Hỗ trợ
Gebildet is committed to customer satisfaction. While a specific warranty period is not stated, we strive to provide high-quality products and sincere service. If you find that our products do not function as expected or do not meet your satisfaction, please do not hesitate to contact us. We are prepared to offer a replacement item or a full refund, as per your preference.
Your feedback and reviews are highly valued as they help us improve our products and services. We greatly appreciate your suggestions.
For support inquiries, please refer to the contact information provided with your purchase or visit the official Gebildet store on Amazon: Gebildet Amazon Store.