Okano 902
Okano Silicone Spray 902 Concentrated Type 420ml
Hướng dẫn sử dụng
1. Giới thiệu
The Okano Silicone Spray 902 Concentrated Type is a high-performance lubricant designed to enhance the smooth operation of various tools and machinery. Its advanced formula ensures long-lasting effectiveness without leaving a sticky residue, making it ideal for applications requiring low friction and clean surfaces.
This manual provides essential information on the safe and effective use, maintenance, and specifications of your Okano Silicone Spray 902.
2. Thông tin an toàn
Vui lòng đọc và hiểu tất cả các cảnh báo an toàn trước khi sử dụng sản phẩm này. Việc không tuân thủ các hướng dẫn này có thể dẫn đến thương tích hoặc hư hỏng.
- Tính dễ cháy: This product is highly flammable. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- Thông gió: Use only in a well-ventilated area. Avoid breathing spray mist.
- Giao tiếp bằng mắt: Tránh tiếp xúc với mắt. Trong trường hợp tiếp xúc với mắt, hãy rửa ngay lập tức với nhiều nước và tìm kiếm sự tư vấn y tế.
- Tiếp xúc với da: Avoid prolonged or repeated skin contact. Wash hands thoroughly after handling.
- Tiêu hóa: Không được nuốt. Nếu nuốt phải, không được gây nôn. Gọi ngay cho trung tâm chống độc hoặc bác sĩ.
- Pressure Container: Pressurized container: May burst if heated. Do not pierce or burn, even after use.
- Kho: Protect from sunlight. Do not expose to temperatures exceeding 50°C (122°F). Keep out of reach of children and pets.
3. Tính năng sản phẩm
The Okano Silicone Spray 902 offers several key features designed for superior performance:
- High-Concentration Formula: Provides enhanced lubrication and protection with a smaller application amount.
- Non-Sticky: Dries quickly without leaving a greasy or sticky residue, ensuring clean operation.
- Long-Lasting Effect: Engineered for durability, maintaining its lubricating properties over extended periods.
- Ứng dụng đa năng: Ideal for improving the sliding motion of woodworking machinery, electric tools, and various types of blades.
4. Hướng dẫn sử dụng
4.1. Thiết lập
- Đảm bảo khu vực làm việc được thông gió tốt.
- Đeo thiết bị bảo hộ cá nhân (PPE) phù hợp, chẳng hạn như kính an toàn và găng tay.
- Shake the can thoroughly for at least 30 seconds before use to ensure proper mixing of contents.
4.2. Hoạt động
- Hold the can upright, approximately 15-20 cm (6-8 inches) from the surface to be treated.
- Apply a thin, even coat of the spray to the desired surface. For best results, apply in short bursts rather than a continuous spray.
- Allow the spray to dry completely before operating machinery or tools. This typically takes a few minutes.
- For hard-to-reach areas, use the included straw applicator (if provided) by inserting it into the nozzle.
An image showing the Okano Silicone Spray 902 Concentrated Type 420ml in a white and blue aerosol can. The label clearly indicates '902 SILICON SPRAY' and '高濃度特殊シリコーン' (High-Concentration Special Silicone).
5. Bảo trì và Bảo quản
5.1. Bảo trì
- Regularly inspect treated surfaces for optimal lubrication. Reapply as needed based on usage frequency and environmental conditions.
- Clean any overspray immediately with a suitable solvent if necessary, though the non-sticky formula minimizes this need.
5.2. Lưu trữ
- Store the can in a cool, dry place, away from direct sunlight and temperatures above 50°C (122°F).
- Keep the cap securely on the can when not in use to prevent accidental discharge and contamination.
- Store away from ignition sources and out of reach of children and animals.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your Okano Silicone Spray 902, refer to the following common troubleshooting tips:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Spray not dispensing or weak spray | Clogged nozzle; low pressure; can too cold | Clean nozzle with a pin; shake can vigorously; warm can to room temperature (do not heat directly). |
| Surface remains sticky after application | Too much product applied; insufficient drying time | Apply a thinner coat; allow more time for drying in a well-ventilated area. |
| Effectiveness is short-lived | Heavy use; abrasive environment; improper application | Reapply more frequently; ensure surface is clean before application; consider environmental factors. |
7. Thông số kỹ thuật
| Thuộc tính | Chi tiết |
|---|---|
| Thương hiệu | Okano |
| Số hiệu mẫu | 902 (Concentrated Type) |
| Âm lượng | 420ml |
| Mẫu sản phẩm | Phun |
| Thành phần chính | Silicon |
| Loại gói | Có thể |
| ASIN | B07FDVR3HV |
8. Bảo hành và Hỗ trợ
For information regarding product warranty, returns, or technical support, please contact your point of purchase or refer to the official Okano webtrang web. Giữ lại biên lai mua hàng làm bằng chứng mua hàng.
For general inquiries, you may visit the manufacturer's website or contact their customer service department. Specific warranty terms may vary by region and retailer.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.