Waytronic Powersound V1 PIR Motion Sensor Voice Programmable Speaker User Manual

Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of your Waytronic Powersound V1 PIR Motion Sensor Voice Programmable Speaker. Please read this manual thoroughly before using the device to ensure proper function and safety.

Thông tin an toàn

• Ensure the power supply matches the device's requirements (DC12V).
• Thiết bị này là không thấm nước. Avoid exposure to rain, moisture, or any liquids.
• Không tự ý tháo rời hoặc sửa chữa thiết bị. Vui lòng liên hệ nhân viên có trình độ để được bảo dưỡng.
• Giữ thiết bị tránh xa nhiệt độ cao và ánh nắng trực tiếp.
• Install the device securely to prevent it from falling.

Sản phẩm trênview

The Waytronic Powersound V1 is a wall-mountable PIR motion sensor speaker designed to play custom audio files upon motion detection. It features a sensitive sensor, a built-in 10W loudspeaker, and supports audio file updates via USB or SD card.

Figure 1: Waytronic Powersound V1 PIR Motion Sensor Speaker with included power adapter.

Thành phần và tính năng:

• Cảm biến chuyển động Pir: Detects movement within approximately 16 feet (5 meters) and triggers audio playback.
• Loa tích hợp: 10W loudspeaker for clear audio output.
• Giao diện USB: For connecting a USB flash drive to transfer audio files.
• Khe cắm thẻ SD: For inserting an SD card (max 2GB) to play audio directly or transfer files.
• Điều khiển âm lượng: Buttons for adjusting playback volume.
• Chế độ phát lại: Supports single cycle or sequential playback of audio files.

Hình 2: Mặt bên view of the device showing the Infrared Indicator Light, SD card slot, USB interface, and control buttons (Previous/A, Next/B, Volume+/C, Volume-/L).

Cài đặt

1. Gắn thiết bị

• The Powersound V1 is designed for wall mounting.
• Choose a location where the motion sensor has an unobstructed view of the desired detection area.
• Consider installing it on the top of a wall or discreetly behind an object like a tree in a covered outdoor area, ensuring it is protected from moisture.
• Secure the device using appropriate mounting hardware (not included).

2. Kết nối nguồn điện

• Connect the provided DC12V power adapter to the device's power input port.
• Plug the power adapter into a standard electrical outlet. The device will power on automatically.

3. Customizing Audio Files

The device supports MP3 audio files. You can update audio files using either a USB flash drive or an SD card.

Figure 3: Close-up of the USB port and SD card slot for audio file sự quản lý.

Using a USB Flash Drive:

1. Format your USB flash drive to FAT32. (Note: NTFS format may cause transfer issues).
2. Copy your desired MP3 audio files vào thư mục gốc của ổ đĩa flash USB.
3. Insert the USB flash drive into the USB interface on the device.
4. Nhấn và giữ V+/C button. The device should automatically begin copying files to its internal memory. The red indicator light may blink during this process.
5. Once the transfer is complete, remove the USB flash drive.

Using an SD Card:

1. Copy your desired MP3 audio files to a standard SD card (maximum 2GB).
2. Insert the SD card into the SD card slot on the device.
3. The device can play audio filesao chép trực tiếp từ thẻ SD.

Hướng dẫn sử dụng

1. Motion Detection and Playback

• Once powered on and with audio files loaded, the device will enter standby mode.
• When the PIR motion sensor detects movement within its range (approximately 16 feet), it will trigger the playback of the stored audio files.
• The audio can be heard up to 100 feet (30 meters) away.

Figure 4: Illustration of the motion sensor detecting movement and triggering sound playback.

2. Chế độ phát lại

The device supports two main playback modes:

• Single Cycle Playback: Plays one audio file and then stops until motion is detected again.
• Order Playback (Sequential): Phát âm thanh files in sequence. After playing the last file, it will loop back to the first.

Specific instructions for switching between these modes are typically found in the device's internal programming or may be controlled by the order of files on the SD card/USB drive. Refer to the manufacturer's specific guidance if available.

3. Điều chỉnh âm lượng

• Sử dụng V+/C nút để tăng âm lượng.
• Sử dụng V-/L nút để giảm âm lượng.
• The device offers multiple volume levels.

BẢO TRÌ

• Vệ sinh: Lau thiết bị bằng vải mềm, khô. Không sử dụng chất tẩy rửa dạng lỏng hoặc vật liệu mài mòn.
• Kho: Khi không sử dụng trong thời gian dài, hãy ngắt kết nối bộ chuyển đổi nguồn và cất giữ thiết bị ở nơi khô ráo, thoáng mát.
• Bảo vệ môi trường: As the device is not waterproof, ensure it is always protected from rain and high humidity, especially if used in outdoor settings.

Xử lý sự cố

Thông số kỹ thuật

Bảo hành và Hỗ trợ

Thông tin bảo hành

The Waytronic Powersound V1 comes with a Bảo hành đầy đủ. For specific terms and conditions, please refer to the warranty card included with your product or contact Waytronic customer service.

Hỗ trợ khách hàng

If you encounter any issues or have questions not covered in this manual, please contact Waytronic customer service. You can often find contact information on the product packaging, the official Waytronic webtrang web hoặc thông qua nền tảng mua hàng của bạn.

When contacting support, please have your product model (Powersound V1) and purchase details ready.