RIGOL DS1054Z Digital Oscilloscope User Manual

1. Giới thiệu

The RIGOL DS1054Z is a 4-channel digital oscilloscope offering a 50MHz bandwidth, 1GSa/s real-time sampling rate, and a 24Mpt record length. It incorporates RIGOL's innovative UltraVision technology to provide advanced display and analysis capabilities. This manual provides essential information for the proper setup, operation, and maintenance of your DS1054Z oscilloscope.

2. Các tính năng chính

• 50 MHz bandwidth with 4 analog channels.
• Tốc độ lên đến 1 GSa/giây theo thời gian thựcamptỷ lệ ling.
• Standard 12 Mpts memory depth, upgradeable to 24 Mpts.
• Innovative UltraVision technology for enhanced signal visibility.
• Waveform capture rate up to 30,000 wfms/s.
• 7-inch WVGA (800x480) display with multi-level intensity grading.
• All-in-one signal debugging and emulation.
• Accelerated analysis and debugging for I2C, RS232, and SPI designs.

3. Sản phẩm hếtview

This section provides a visual and functional overview of the RIGOL DS1054Z Digital Oscilloscope.

Hình 1: Mặt trước view of the RIGOL DS1054Z Digital Oscilloscope, showing the display, control panel, and input channels.

Hình 2: Phía sau view of the RIGOL DS1054Z Digital Oscilloscope, displaying power input, USB, LAN, and auxiliary output ports.

4. Thiết lập

1. Tháo hộp: Carefully remove the oscilloscope and all accessories from the packaging. Verify that all included components (power cord, USB cable, 4x 150MHz probes) are present.
2. Kết nối nguồn điện: Connect the provided power cord to the AC input on the rear panel of the oscilloscope and then to a suitable AC power outlet (100 V~240 V).
3. Bật nguồn: Press the power button located on the front panel to turn on the device. The display will illuminate, and the system will initiate its startup sequence.
4. Kết nối thăm dò: Connect the 150MHz probes to the desired input channels (CH1-CH4) on the front panel. Ensure a secure connection.
5. Initial Probe Compensation: Before taking measurements, it is recommended to perform probe compensation to ensure accurate readings. Refer to the detailed user guide for specific instructions on probe compensation.

5. Hướng dẫn vận hành

This section covers basic operational procedures for the DS1054Z oscilloscope.

5.1 Thu thập dạng sóng cơ bản

1. Connect Signal: Connect the probe to the signal source you wish to measure.
2. Chọn kênh: Press the corresponding channel button (e.g., CH1) to enable the channel.
3. Tự động thiết lập: For a quick display of the waveform, press the TỰ ĐỘNG button. The oscilloscope will automatically adjust vertical, horizontal, and trigger settings.
4. Điều chỉnh thủ công: Use the vertical scale (V/div) and position knobs for each channel, and the horizontal scale (s/div) and position knobs to fine-tune the waveform display.

5.2 Trigger Functions

The DS1054Z offers various trigger types to stabilize and capture specific events.

• Kích hoạt cạnh: Triggers on a rising or falling edge of a signal.
• Kích hoạt bằng độ rộng xung: Kích hoạt dựa trên các xung có độ rộng xác định.
• Kích hoạt độ dốc: Triggers on signals with a specific rise or fall time.
• Kích hoạt video: Kích hoạt trên tín hiệu video tiêu chuẩn.
• Kích hoạt mẫu: Triggers when a specific logic pattern is met across multiple channels.
• Duration Trigger: Triggers on events lasting a specified duration.

To access trigger settings, press the TRIGGER MENU button and use the soft keys and multi-function knob to configure the desired trigger type and parameters.

Figure 3: Oscilloscope display illustrating various expanded functions and trigger options, including memory depth settings.

5.3 Waveform Record and Playback

The DS1054Z allows for recording and playback of waveforms, which is useful for capturing transient events or analyzing long signal sequences.

1. Access Record Function: Navigate to the waveform record menu (refer to the full user manual for exact menu path).
2. Configure Recording: Set the desired record length and other parameters.
3. Bắt đầu/Dừng ghi: Initiate recording to capture waveforms. Stop recording when the desired data is acquired.
4. Phát lại: Sử dụng các điều khiển phát lại đểview the recorded waveforms.

Figure 4: Oscilloscope display showing the interface for waveform recording and playback, including controls for starting, stopping, and reviewing captured data.

6. Thông số kỹ thuật

7. Bảo trì

• Vệ sinh: Regularly clean the exterior of the oscilloscope with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or solvents.
• Thông gió: Hãy đảm bảo các lỗ thông gió trên thiết bị không bị tắc nghẽn để tránh quá nhiệt.
• Kho: When not in use for extended periods, store the oscilloscope in a clean, dry environment, away from direct sunlight and extreme temperatures.
• Chăm sóc đầu dò: Handle probes carefully. Avoid bending or stressing the cables excessively. Store probes properly to prevent damage to the tips and connectors.

KHAI THÁC. Xử lý sự cố

This section addresses common issues you might encounter with your oscilloscope.

8.1 Màn hình không hiển thị sau khi bật nguồn

• Check if the power cord is securely connected to both the oscilloscope and the power outlet.
• Kiểm tra xem ổ cắm điện có hoạt động bình thường không.
• Đảm bảo nút nguồn được nhấn hoàn toàn.

8.2 Dạng sóng không ổn định

• Điều chỉnh mức kích hoạt đến một điểm ổn định trên dạng sóng.
• Select an appropriate trigger type for the signal being measured (e.g., Edge trigger for periodic signals).
• Check the probe connection and ensure it is properly compensated.
• Verify the input signal's amplitude and frequency are within the oscilloscope's specifications.

8.3 Không có tín hiệu hiển thị

• Ensure the input channel is enabled (its corresponding button is lit).
• Check the probe connection to the signal source and the oscilloscope.
• Adjust the vertical scale (V/div) to a more sensitive setting.
• Nhấn nút TỰ ĐỘNG button to allow the oscilloscope to automatically find the signal.

9. Bảo hành và Hỗ trợ

9.1 Thông tin bảo hành

The RIGOL DS1054Z main unit comes with a standard Bảo hành 3 năm from the date of purchase when bought through Amazon. Accessories such as modules, probes, and batteries are covered by a Bảo hành 1 năm. This warranty covers operational defects confirmed by RIGOL Japan. Parallel import products are not eligible for warranty or free support from RIGOL Japan.

In case of a suspected malfunction, after our company confirms that the event is a malfunction, we will provide a replacement with the same product or repair service, or other appropriate response as determined by our company.

9.2 Initial Defect Exchange Policy

Returns are accepted within 14 days of product arrival for initial defects. Return shipping costs for reasons other than operational defects are borne by the purchaser. Questions regarding operational defects or usage are accepted via Amazon email.

9.3 Sửa chữa và hiệu chuẩn

For repair or calibration services, please contact a domestic authorized RIGOL dealer.

9.4 Tài nguyên và hỗ trợ bổ sung

User guides, datasheets, and software for the DS1054Z can be downloaded from the official RIGOL Japan website. If you require an instruction manual earlier, please contact us via Amazon message.