1. Giới thiệu
Thank you for choosing the ANSMANN Powerline 4 Smart battery charger. This intelligent charger is designed to safely and efficiently recharge your NiMH AA (Mignon HR6) and AAA (Micro HR03) rechargeable batteries. Please read this manual carefully before first use to ensure proper operation and to maximize the lifespan of your batteries and charger.
2. Thông tin an toàn
- Use this charger only for NiMH AA and AAA rechargeable batteries. Do not attempt to charge other battery types (e.g., alkaline, lithium) as this may cause explosion, leakage, or personal injury.
- Không để bộ sạc tiếp xúc với mưa, độ ẩm hoặc nhiệt độ khắc nghiệt.
- Ensure proper polarity when inserting batteries. The charger features reverse polarity protection.
- Không được tháo rời hoặc sửa đổi bộ sạc. Mọi công việc bảo dưỡng phải do nhân viên có chuyên môn thực hiện.
- Rút bộ sạc ra khỏi ổ cắm điện khi không sử dụng hoặc trước khi vệ sinh.
- The charger incorporates an automatic shutdown (-dU) and an 8-hour safety timer to prevent overcharging.
- Để xa tầm tay trẻ em.
For detailed safety information, please refer to the safety document provided with your product.
3. Sản phẩm hếtview
3.1 Các tính năng chính
- Intelligent charging: Automatically and individually charges 1 to 4 NiMH AA/AAA batteries.
- Automatic charge termination: Stops charging when batteries reach 100% capacity.
- Trickle charge: Maintains full charge once batteries are charged.
- Defective battery detection: Identifies and signals faulty rechargeable batteries.
- Accu Repair mode: Revives deeply discharged or 'tired' rechargeable batteries.
- Safety features: Reverse polarity protection, -dU automatic shutdown, 8-hour safety timer.
3.2 Nội dung gói
- 1x ANSMANN Powerline 4 Smart Battery Charger with integrated power supply (100-240V)
- 1x Hướng dẫn sử dụng
3.3 thành phần sản phẩm
The charger features four individual charging slots for AA or AAA batteries and LED indicators above each slot to show the charging status.
4. Thiết lập
4.1 Kết nối bộ sạc
- Ensure the charger is clean and dry before connecting to power.
- Plug the integrated power plug of the ANSMANN Powerline 4 Smart charger directly into a standard wall power outlet (100-240V AC).
4.2 Lắp pin
- Open the battery compartment if applicable, or simply slide batteries into the slots.
- Insert 1 to 4 NiMH AA (Mignon HR6) or AAA (Micro HR03) rechargeable batteries into the charging slots.
- Ensure correct polarity (+ and -) by matching the battery terminals with the markings on the charger slots. The charger has reverse polarity protection.
5. Hướng dẫn vận hành
5.1 Quy trình sạc
Once batteries are correctly inserted and the charger is plugged in, the charging process begins automatically for each individual battery. The LED indicator above each slot will show the charging status:
- Màu xanh lá cây nhấp nháy: Pre-charge mode (initial phase of charging).
- Màu đỏ: Fast charge mode (main charging phase).
- Màu xanh lá: Ready / Trickle charge mode (battery is fully charged and maintained).
- Đèn nhấp nháy màu đỏ: Defective battery detected.
The charging time for a 1000 mAh battery is approximately 2 hours and 30 minutes. For a 2500 mAh battery, it is approximately 6 hours.
5.2 Accu Repair Mode
The Powerline 4 Smart features an 'Accu Repair' function. This mode attempts to reactivate deeply discharged or 'tired' NiMH batteries, potentially extending their usable life. This process is automatic and integrated into the charging cycle.
5.3 Defective Battery Detection
The charger automatically detects defective batteries. If a faulty battery is inserted, the corresponding LED indicator will flash red, and the charging process for that specific slot will not proceed. Remove and dispose of defective batteries according to local regulations.
6. Bảo trì
6.1 Vệ sinh
- Luôn rút phích cắm bộ sạc khỏi ổ điện trước khi vệ sinh.
- Use a dry, soft cloth to wipe the exterior of the charger.
- Do not use liquid cleaners, solvents, or abrasive materials.
- Ensure no dust or debris accumulates in the charging slots.
6.2 Lưu trữ
- Bảo quản bộ sạc ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ khắc nghiệt.
- When not in use for extended periods, unplug the charger.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Charger not starting / No LED activity | No power supply; Charger not properly plugged in. | Check power outlet; Ensure charger is securely plugged in. |
| LED nhấp nháy màu đỏ | Defective battery detected. | Remove the battery. If it continues to flash red with other batteries, the charger may be faulty. |
| Pin không sạc đầy | Battery is old or damaged; Incorrect battery type. | Try the 'Accu Repair' function (automatic). Replace old batteries. Ensure only NiMH AA/AAA batteries are used. |
| Charger feels warm during operation | Bình thường khi sạc. | This is normal. If it becomes excessively hot or emits smoke/odor, unplug immediately and contact support. |
8. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Thương hiệu | Ansmann |
| Số hiệu mẫu | 1001-0049 |
| Các loại pin tương thích | NiMH AA/Mignon/HR6 and AAA/Micro/HR03 |
| Số lượng khe sạc | 4 |
| Đầu vào Voltage | 100-240 Vôn (AC) |
| Đầu ra Voltage | 5 Vôn (DC) |
| Cường độ hiện tại | 500mA |
| Typical Charging Time (1000 mAh) | 2.5 giờ |
| Product Dimensions (P x L x H) | 67P x 12l x 77H millimeters (Note: The provided dimensions 67P x 12l x 77H mm seem inconsistent with the image 119mm H x 67mm W x 36mm D. Using image dimensions for clarity.) |
| Kích thước sản phẩm (Chiều cao x Chiều rộng x Chiều sâu) | 119mm x 67mm x 36mm |
| Màu sắc | Đen |
| Tiêu chuẩn an toàn | Được chứng nhận bởi TÜV |
| Nước xuất xứ | Trung Quốc |
9. Bảo hành và Hỗ trợ
9.1 Thông tin bảo hành
The ANSMANN Powerline 4 Smart charger comes with a 3-year warranty. Please retain your proof of purchase for warranty claims. Spare parts availability in the EU is also 3 years.
9.2 Hỗ trợ khách hàng
For any questions, technical assistance, or warranty claims, please contact ANSMANN customer support through their official website or the retailer where you purchased the product. Do not attempt to repair the device yourself.