HomeSpot HS-BTADP-258LR-BUN158LR-UL

Hướng dẫn sử dụng bộ thu phát Bluetooth tầm xa HomeSpot.

Model: HS-BTADP-258LR-BUN158LR-UL

1. Sản phẩm hếtview

The HomeSpot Long Range Bluetooth Transmitter Receiver Set is designed to provide high-quality wireless audio streaming with minimal latency. This set includes a Bluetooth Transmitter and a Bluetooth Receiver, pre-paired for immediate use. It allows you to transmit audio from non-Bluetooth devices to Bluetooth-enabled headphones or speakers, or receive Bluetooth audio on non-Bluetooth audio systems.

Các tính năng chính bao gồm:

2. Nội dung gói hàng

Upon opening your HomeSpot Long Range Bluetooth Transmitter Receiver Set, please verify that all items listed below are present and in good condition:

HomeSpot Bluetooth Transmitter Receiver Set package contents including units, cables, and power adapters.

Image: Contents of the HomeSpot Bluetooth Transmitter Receiver Set package. It includes the Bluetooth Transmitter, Bluetooth Receiver, User Guide, Warranty Card, TOSLINK Optical Cable, 3.5mm to RCA Cable, 3.5mm to 3.5mm Aux Cable, micro USB Charging Cables, and USB Power Adapters.

3. Hướng dẫn thiết lập

The HomeSpot Transmitter and Receiver are pre-paired for your convenience. Follow these steps to connect your devices:

Diagram showing connection of HomeSpot Bluetooth Transmitter to a TV and Receiver to headphones or speakers.

Image: A diagram illustrating the connection setup. The Bluetooth Transmitter connects to a TV (audio source) and wirelessly sends audio to the Bluetooth Receiver, which then connects to non-Bluetooth enabled headphones or speakers.

  1. Kết nối máy phát:
    • Identify the audio output port on your source device (e.g., TV, PC, game console). This can be Optical (TOSLINK), RCA, or 3.5mm AUX.
    • Using the appropriate cable provided, connect the audio output of your source device to the corresponding input port on the HomeSpot Bluetooth Transmitter.
    • Connect the micro USB cable to the Transmitter's power input and plug the other end into a USB power adapter (provided) or a USB port on your source device (e.g., TV USB port).
  2. Kết nối đầu thu:
    • Identify the audio input port on your audio system (e.g., speakers, headphones, amplifier). This can be Optical (TOSLINK), RCA, or 3.5mm AUX.
    • Using the appropriate cable provided, connect the audio output of the HomeSpot Bluetooth Receiver to the corresponding input port on your audio system.
    • Connect the micro USB cable to the Receiver's power input and plug the other end into a USB power adapter (provided) or any available USB power source.
  3. Bật nguồn: Ensure both the Transmitter and Receiver are powered on. Since they are pre-paired, they should automatically connect. The indicator lights on both units will confirm connection status.

For optimal audio synchronization, especially with video, it is recommended to use the Optical (TOSLINK) connection if available on your source device.

4. Hướng dẫn vận hành

Once connected and powered on, the HomeSpot Bluetooth Transmitter Receiver Set operates automatically to provide wireless audio.

HomeSpot Bluetooth Transmitter connected to a TV, wirelessly sending audio to a large floor-standing speaker.

Image: The HomeSpot Bluetooth Transmitter is discreetly placed near a television, wirelessly transmitting audio to a large speaker system, demonstrating a typical indoor setup.

Outdoor movie night setup with HomeSpot Bluetooth audio, showing a projector, screen, and people enjoying the sound.

Image: An outdoor scene depicting a movie night with a projector and screen. The HomeSpot Bluetooth system facilitates wireless audio for an immersive experience, highlighting its long-range capability for outdoor use.

4.1. Audio Synchronization with aptX Low Latency

The set utilizes aptX Low Latency technology to minimize audio delay, ensuring that sound is synchronized with video content. This is crucial for watching movies, TV shows, or playing games without noticeable lip-sync issues.

Chart comparing audio latency of different Bluetooth codecs: aptX Low Latency, aptX, FastStream, and SBC.

Image: A bar chart illustrating the latency performance of various Bluetooth audio codecs. aptX Low Latency shows a latency of less than 30ms, significantly lower than standard SBC (220ms), aptX (less than 90ms), and FastStream (less than 70ms), indicating superior audio-video synchronization.

4.2. Range Performance

Equipped with high-gain external antennas, the HomeSpot set offers an extended wireless range of up to 164 feet (50 meters). This allows for flexible placement of your audio source and receiving devices, covering large indoor spaces or extending to outdoor areas like backyards or patios.

5. Bảo trì

To ensure the longevity and optimal performance of your HomeSpot Bluetooth Transmitter Receiver Set, follow these simple maintenance guidelines:

KHAI THÁC. Xử lý sự cố

If you encounter issues with your HomeSpot Bluetooth Transmitter Receiver Set, please refer to the following common problems and solutions:

Vấn đềNguyên nhân có thểGiải pháp
No audio or intermittent sound.Loose cable connections, incorrect input/output selection, power issue.Ensure all cables (audio and power) are securely connected. Verify that the correct audio input/output is selected on both the source device and the receiving audio system. Check power indicators on both units.
Noticeable audio delay (lip-sync issues).Using analog connections (RCA/AUX) or non-aptX LL compatible devices.For best performance, use the Optical (TOSLINK) connection if available. Ensure both the transmitter and receiver are functioning correctly with aptX Low Latency. Some older TVs may introduce slight delays even with optical.
Âm thanh bị nhiễu hoặc méo tiếng.Interference, weak signal, or temporary software glitch.Move the units closer together or away from other wireless devices that may cause interference. Power cycle both the Transmitter and Receiver by unplugging and re-plugging them after a few seconds.
Units not pairing automatically.Out of range during initial connection, or pairing reset.Place the Transmitter and Receiver in close proximity (within 1-2 meters) and power cycle both units. They should re-pair automatically. If issues persist, consult the detailed pairing instructions in the included User Manual.
Humming or signal noise when no audio is playing.Ground loop interference or sensitive audio equipment.If possible, connect both the source and receiving audio equipment to the same power outlet. If the hum persists, consider disconnecting the units when not in active use.
Only stereo audio, no surround sound.Product designed for stereo audio transmission.This product is designed for stereo audio transmission and does not support multi-channel surround sound formats (e.g., 5.1, 7.1). Ensure your source device's audio output is set to stereo.

7. Thông số kỹ thuật

Tính năngĐặc điểm kỹ thuật
Số hiệu mẫuHS-BTADP-258LR-BUN158LR-UL
Thương hiệuTrang chủSpot
Công nghệ kết nốiBluetooth, Phụ trợ, USB
Tính năng đặc biệtLong Range and aptX Low Latency Technology
Thiết bị tương thíchPersonal Computer, Speaker, TV, Headphones
Loại đầu nối3.5mm Jack, RCA, USB, Optical (TOSLINK)
Chế độ đầu ra âm thanhÂm thanh nổi
Số lượng kênh2 (Âm thanh nổi)
Trọng lượng sản phẩm14.9 ounce (khoảng 422g)
Kích thước gói hàng6.1 x 4.92 x 2.99 inch
Ngày đầu tiên có sẵnNgày 14 tháng 2018 năm XNUMX

8. Bảo hành và Hỗ trợ

HomeSpot products are designed for reliability and performance. This product comes with a Warranty Card included in the package. Please refer to the Warranty Card for specific terms and conditions of your product's warranty.

For further assistance, technical support, or warranty claims, please visit the official HomeSpot webhoặc liên hệ với bộ phận chăm sóc khách hàng của họ:

HomeSpot is committed to providing quality products and customer satisfaction. Do not attempt to repair the device yourself, as this may void your warranty.