Panasonic ER-SB40-K803

Panasonic ER-SB40-K803 Beard Trimmer User Manual

Model: ER-SB40-K803

1. Giới thiệu

The Panasonic ER-SB40-K803 is a high-performance beard trimmer designed for precise grooming. It features a patented linear motor for consistent power, 45-degree stainless steel blades, and 20 length settings for versatile styling. This trimmer supports both cordless and corded operation and is fully waterproof for easy cleaning.

Các thành phần bao gồm:

  • Panasonic ER-SB40-K803 Trimmer
  • Lược đính kèm
  • Bộ đổi nguồn AC/Nguồn điện
  • Bàn chải vệ sinh
  • Dầu lưỡi
  • Túi du lịch
  • Hướng dẫn sử dụng
Panasonic ER-SB40-K803 beard trimmer and accessories laid out

Image 1.1: The Panasonic ER-SB40-K803 trimmer with its complete set of accessories, including the comb attachment, charging cable, cleaning brush, oil, and travel pouch.

2. Thiết lập

2.1 Sạc ban đầu

Before first use, fully charge the Panasonic ER-SB40-K803 trimmer. Connect the AC adapter to the trimmer and plug it into a power outlet. The LED battery indicator will show charging status. A full charge takes approximately 1 hour and provides up to 60 minutes of cordless operation.

2.2 Lắp phụ kiện lược

To attach the comb, align it with the trimmer head and push it firmly until it clicks into place. Ensure it is securely fastened before use.

Close-up of the comb attachment for the beard trimmer

Hình ảnh 2.1: Một chi tiết view of the comb attachment, designed for precise length control during trimming.

3. Hướng dẫn vận hành

3.1 Bật / Tắt nguồn

Nhấn nút nguồn một lần để bật máy tỉa râu. Nhấn lại lần nữa để tắt máy.

3.2 Điều chỉnh cài đặt độ dài

Use the convenient adjustment dial to select your desired cutting length. The trimmer offers 20 settings from 0.5 mm to 10 mm, in 0.5 mm increments.

Close-up of the length adjustment dial on the Panasonic beard trimmer

Image 3.1: The ergonomic dial allows for easy and precise adjustment of cutting lengths.

3.3 Trimming Your Beard

Hold the trimmer with the blades facing your beard. Move the trimmer against the direction of hair growth for an even trim. The trimmer can be used for both dry and wet shaving, including with shaving foam.

Man using the Panasonic beard trimmer to style his beard

Image 3.2: A user demonstrating the beard trimmer in action, achieving a precise and clean look.

Man using the Panasonic beard trimmer with shaving foam for a wet shave

Image 3.3: The trimmer is suitable for wet use, allowing for comfortable shaving with foam.

3.4 Khóa du lịch

To activate or deactivate the travel lock, press and hold the power button for several seconds. This prevents accidental activation during transport.

4. Bảo trì

4.1 Vệ sinh

The trimmer's waterproof design allows for easy cleaning under running water after each use. Ensure the trimmer is turned off before cleaning.

Hand rinsing the Panasonic beard trimmer under running water

Image 4.1: The trimmer's waterproof construction allows for quick and hygienic cleaning under tap water.

Panasonic beard trimmer covered in water droplets on a wet surface

Image 4.2: The trimmer is designed to withstand water, making cleaning simple and effective.

4.2 Bôi dầu cho lưỡi dao

Apply a drop of the provided blade oil to the blades before and after each use. This ensures smooth operation and extends blade life. After applying oil, turn on the trimmer for about 5 seconds to distribute the oil.

4.3 Chăm sóc pin

To maintain battery health, ensure the battery is fully charged at least once every 6 months, especially if not used for extended periods. Do not store the battery completely discharged for long durations. If the battery is very low, charge it for at least 1 minute before use.

KHAI THÁC. Xử lý sự cố

5.1 Device Noisy or Overheating

If the trimmer becomes noisy or overheats, it may indicate insufficient lubrication. Turn off the device, remove the blade, apply a drop of oil to each indicated point on the blade, then reattach the blade. Turn the device on for approximately 5 seconds to allow the oil to spread.

5.2 Trimmer Not Turning On

Check if the battery is charged. If the battery is low, charge the trimmer for at least 1 minute. Ensure the travel lock is not activated (press and hold the power button to toggle).

6. Thông số kỹ thuật

Tính năngĐặc điểm kỹ thuật
Số hiệu mẫuER-SB40-K803
Nguồn điệnCordless (Rechargeable Battery) / Corded
Loại pin1 pin Lithium-ion
Thời gian sạcKhoảng 1 giờ
Thời gian hoạt độngApprox. 60 minutes (cordless)
Cài đặt độ dài20 settings (0.5 mm to 10 mm, 0.5 mm increments)
Vật liệu lưỡi daoThép không gỉ
Không thấm nướcĐúng
Kích thước (D x R x C)17.9 x 4.8 x 4.5 cm (45 x 48 x 179 mm)
Cân nặng180 gram
Màu sắcĐen

7. Bảo hành và Hỗ trợ

7.1 Bảo hành của nhà sản xuất

This Panasonic ER-SB40-K803 beard trimmer comes with a Bảo hành 2 năm của nhà sản xuất. Vui lòng giữ lại bằng chứng mua hàng để yêu cầu bảo hành.

7.2 Hỗ trợ khách hàng

For technical assistance, spare parts, or warranty service, please contact Panasonic customer support in your region. Refer to the contact information provided in the packaging or on the official Panasonic webđịa điểm.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.